01
Nordberg MP Series
Large cone crushers for mining
MP800, MP1000, MP1250, MP3000; MP2500 is retained as a legacy installation.
View the MP Series →
OEM Equipment Category
Identify the series before checking models, chambers and parts
Metso cone crushers include current HP, HPe, GP, MP and MX series and legacy Symons and Omnicone installations. This page links to a dedicated page for each series rather than treating a generic cone crusher structure as an OEM model.
5 Current product series
2 Legacy equipment families
6 Core wear-part categories
9 Spare-part categories
Series Pages
Open the corresponding Metso cone crusher series page
Each card opens a dedicated page with models, key dimensions, wear parts, spares and confirmed compatibility information.
02
Nordberg HPe Series
New-generation high-performance cone crushers
HP200e, HP350e, HP450e, HP600e, HP800e, HP900e。
View the HPe Series →
03
Nordberg HP Series
Established high-speed cone crushers
HP100, HP200, HP300, HP400, HP500, HP900, HP3, HP4, HP5, HP6。
View the HP Series →
04
Nordberg GP Series
Secondary and versatile cone crushers
GP100S, GP300S, GP500S, GP100, GP220, GP330, GP550, GP7。
View the GP Series →
05
Metso MX Series
Multi-action cone crushers
Current published models: MX3 and MX4.
View the MX Series →
06
Symons / Omnicone
Legacy installed equipment
Symons 2–7 ft series; Omnicone 937, 1144, 1352, 1560.
View Legacy Installations →
Model Overview
Current series and legacy models
Models identify the relevant series page. Final manufacture still requires the serial number, chamber profile, drawing number, revision and upgrade status.
| Series | Main standard models / installed range | Status |
|---|---|---|
| Nordberg MP Series | MP800, MP1000, MP1250, MP3000; legacy MP2500 | Current series and legacy installations |
| Nordberg HPe Series | HP200e, HP350e, HP450e, HP600e, HP800e, HP900e | Current series |
| Nordberg HP Series | HP100, HP200, HP300, HP400, HP500, HP900, HP3, HP4, HP5, HP6 | Current series with a large installed base |
| Nordberg GP Series | GP100S, GP300S, GP500S, GP100, GP220, GP330, GP550, GP7; earlier GP installations also remain in service | Current series and legacy installations |
| Metso MX Series | MX3, MX4 | Current series |
| Symons / Omnicone | Symons 2, 3, 4, 4¼, 5½, 7 ft；Omnicone 937, 1144, 1352, 1560 | Legacy installations |
Wear Parts
Crushing chamber, feed and frame protection parts
Images illustrate generic cone crusher part categories. For each Metso series, confirm profiles, dimensions, hole patterns, mounting structures and materials against the model, chamber and drawings.
01
Mantle / Head Liner
Mantle / Head Liner
Mounted on the crushing head, the mantle withstands high compression and abrasion. Check chamber profile, contour, thickness, locking structure and drawing number.
View the common part page →
02
Bowl Liner / Concave
Bowl Liner / Concave
Mounted inside the bowl, it forms the crushing chamber with the mantle. Check standard / short-head configuration, feed opening, CSS, contour and mating surfaces.
View the common part page →
03
Feed Plate / Feed Cone
Feed Plate / Feed Cone
Located above the crushing head, it distributes feed and withstands impact and sliding wear. Check profile, fastening, feed conditions and lifting interfaces.
View the common part page →
04
Main Frame Liners
Main Frame Liner
Protect the inner main frame and falling-material area. Check segmentation, thickness, hole pattern, seating surfaces and observed wear direction.
View the common part page →
05
Frame and Arm Guards
Frame & Arm Guards
Protect frame arms and their material-facing surfaces. Check installation position, left / right orientation, holes and the material flow path.
View the common part page →
06 Counterweight and Lower Guards
06
Counterweight and Lower Guards
Counterweight & Lower Guards
Protect the counterweight, lower frame and discharge area. Check segmentation, clearances, fasteners and machine rotation direction.
View the common part page →
Spare Parts
Support, drive, adjustment, hydraulic and sealing components
For large assemblies and precision-fit parts in each Metso cone crusher series, check OEM drawing and part numbers, materials, heat treatment, interface dimensions, clearances and inspection requirements separately.
01 Main Frame and Main Shaft Assembly
01
Main Frame and Main Shaft Assembly
Main Frame & Main Shaft Assembly
The load-bearing datum of the machine and its fixed main-shaft structure. Check casting revision, shaft dimensions, datum surfaces, liner interfaces and nondestructive testing requirements.
Submit Drawings and Dimensions →
02 Bowl and Adjustment Ring Assembly
02
Bowl and Adjustment Ring Assembly
Bowl & Adjustment Ring Assembly
Includes the bowl, adjustment ring, clamping ring, adjustment mechanism and clamping-cylinder interfaces. Confirm standard / short-head configuration and upgrade status.
Submit the Model and Drawing Number →
03 Head Assembly
03
Head Assembly
Head Assembly
Includes the head, mantle interface, feed plate connection and locking structure. Check head revision, chamber profile, bushings and lock-nut configuration.
Submit the General Arrangement and Drawing Number →
04
Socket and Socket Liner
Socket & Socket Liner
Support the head under oscillating contact loads. Check spherical radius, thickness, oil grooves, material and contact condition.
View the common part page →
05
Eccentric Assembly and Bushings
Eccentric Assembly & Bushings
Generate eccentric motion while maintaining sliding fits. Check eccentricity, inside and outside diameters, oil grooves, interference fits, copper alloy and gear interface.
View the common part page →
06
Countershaft Box, Shaft and Bushings
Countershaft Box, Shaft & Bushings
Transmit torque from the drive to the eccentric assembly. Check bearing seats, keyways, end connections, seals and bushing fits.
View the common part page →
07 Gear and Pinion
07
Gear and Pinion
Gear & Pinion
Transmit main-drive torque. Check tooth count, module, pressure angle, helix angle, rotation direction, matched-pair markings, material and heat treatment.
View Gear Components →
08
Clamping Cylinders, Tramp Release and Hydraulic Components
Clamping, Tramp Release & Hydraulic Parts
Maintain the setting and release loads during tramp-metal events. Check cylinder revision, pressure, stroke, seals, piping and HPU configuration.
View the common part page →
09 Dust Protection and Lubrication
09
Dust Sealing and Lubrication System
Dust Sealing & Lubrication System
Protect sliding surfaces and control oil temperature, filtration and flow. Check seal type, oil grade, filters, pumps, coolers and connections.
View Seal Components →How do I identify the Metso cone crusher series?
Start with the complete series, model and serial number on the nameplate, then check the chamber, adjustment method, drive and assembly structure.
Are parts from different series directly interchangeable?
Brand or equipment category alone does not establish interchangeability. Compatibility requires manufacturer-published confirmation or verified drawing numbers, drawings, interfaces and dimensions.
Can I request a quotation without an OEM drawing number?
Submit the complete model, serial number, installation position, used-part photographs, key dimensions, material and operating conditions. An engineer can then determine the next checks.
More Component Pages
Browse component descriptions, drawing requirements and enquiry details.
- Arm Guard
- Bowl Liner / Concave
- Cone crusher bushing system
- Drive Shaft Bushing
- Counterweight Guard
- Cone crusher chamber liner system
- Gear Wheel / Bevel Ring Gear
- Eccentric Bushing
- Feed Disc / Distributor Cone
- Cone Crusher Frame Protection Liner System
- Lower Head Bushing
- Main Frame Liner
- Mantle
- Pinion
- Socket Liner
- Upper Head Bushing