Six species Standard Models Key dimensions smashing cavity wear parts, Power Transmission Supplies and Containers spare parts Hydraulic parts and intergenerational compatible relationships.
HP200e / HP350e / HP450e / HP600e / HP800e / HP900e — / / / / / — Metso launched the HPE series in, and currently open products range from: The HSE; its current public offerings include a number of standard configuration numbers (HP) to select parts for their identification (;;;;;; ) (2023)
Only the original factory is publicly available and directly related to Spare Parts identification; capacity will change with cavity profile, closed-edge closing setting (STD), athleticism or material that can not be used for counterpoint parts.
| Model | Maximum Power | Head Diameter | Open Weight | Open capacity |
|---|---|---|---|---|
| HP200e | 160 kW / 200 hp | 940 mm | Full Machine 12,300 kg | Supreme Court 290 mtph |
| HP350e | 250 kW / 350 hp | 1,120 mm | Full Machine 18,300 kg | Supreme Court 485 mtph |
| HP450e | 355 kW / 450 hp | 1,320 mm | Full Machine 26,000 kg | Supreme Court 695 mtph |
| HP600e | 450 kW / 600 hp | 1,520 mm | Full Machine 37,400 kg | Supreme Court 950 mtph |
| HP800e | 600 kW / 800 hp | 1,650 mm | 65,500 kg, including the secondary frame and full drive | Typical ore 305 – 1,240 mtph |
| HP900e | 700 kW / 900 hp | 1,780 mm | 77,960 kg | Open Scope 341 – 2,000 mtph |
The image is indicative of the Cone crusher general parts category; outlines, dimensions and pores for HPE series must be returned to model cavity profile with drawing confirmation.
Mantle / Head Liner
Mounting On the outer surface of a broken head, withstand high extrusion pressure and abrasive wear. Converged cavity profile, Contours and thicknesses; Closed Construction and drawing number.
View Part Details →
Bowl Liner / Concave
Mounting In the inner side of a slab, and mantle Forming a fractured cavity. Contrast standard configuration / short-head configuration, Feed opening, CSS, Contours and Compatible Faces.
View Part Details →
Feed Plate / Feed Cone
. Located on the top of a crushing head, carrying fabrics and shock sliding wear Nuclear outer shape, tightening mode and feeding conditions Interfaces.
View Part Details →
Main Frame Liner
Protects the main frame The inner wall and the fall area. Contrasts of fragments, thicknesses / holes lines; alignment surfaces as well for field wear directions
View Part Details →
Frame & Arm Guards
Protection of the frame arm and its ventilator. installation position, left-hand direction and hole lines as well the material brushing path.
View Part Details →Counterweight & Lower Guards
Protection of weight, chassis and discharge area. Comparisons Construction, gaps and fasteners and Equipment rotated direction.
View Part Details →HPe Series Large aggregates and precision parts must be checked separately OEM drawing number, spare parts, materials, heat treatment, Interfaces Sizes, gap and Inspection Requirements.
Main Frame & Main Shaft Assembly
Whole machine load Reference Material and fixed Main Shaft Construction. Copying of castings Revision, Main Shaft Sizes, Reference Material Faces, Liners Interfaces and NDT Demand.
Submission Drawings and dimensions →Bowl & Adjustment Ring Assembly
Contains bowling rack, adjustable ring and clamped rings Interfaces. Converging criteria/shorts Configuration and Upgrades Condition.
Submission Models and drawing references →Head Assembly
including the broken head, Liners Interfaces, feed cone Connections and locking Construction. Contrast the head Revision, cavity profile, bushings and Locking Nuts Configuration.
Submission general arrangement drawing and drawing number →
Socket & Socket Liner
The shattering head and withstands swing Contact Load. Contrast the spherical radius, thicknesses and oil sinks materials and Contact Condition.
View Part Details →
Eccentric Assembly & Bushings
Concrete eccentric movement and keep sliding. Compare the amount of migraine, internal or external diameters; oil sinking: excess surpluses | Form an axiom motion to maintain smoothness with it in combination gear Interfaces.
View Part Details →
Countershaft Box, Shaft & Bushings
From the drive side Eccentric assembly Transferring torque. Converging bearing Bits, key groovees and terminal connections Shaft Sleeve Co-operation.
View Part Details →Gear & Pinion
The main drive torque is transmitted by the number of teeth, modulus numbers and pressure angle; spiral corner: rotational indexing materials and heat treatment.
Entrance gear Parts Page -
Clamping, Tramp Release & Hydraulic Parts
Maintain the settings and release loads in an over-iron event. Verify cylinder Revision, pressures and strokees; sealing of the roadway HPU Configuration.
View Part Details →Dust Sealing & Lubrication System
Protection of sliding and control the temperature, filtering & flow. Contrast seals form oil products Filterers pump sets Cooler Interfaces.
Enter the sealing parts pageCompatible information is used only to narrow the scope of checks and cannot be substituted drawing number, cavity profile, Installations Revision and Key dimensions Confirmation.
| Objects | Metso Public statements | Pre-Supply Required Checks |
|---|---|---|
| HP450e / HP400 | Most spare parts and wear parts Compatible; HP400 Using a backless liner through the upgrading of bowling racks and crushed heads Liners, HP450e Classics can also be used HP400 slinging type Liners | Broken cavities, bowling racks and crushed heads Liners Revision and upgrade records |
| HP600e / HP500 | Most spare parts and wear parts Compatible; HP500 Using a backless liner through the upgrading of bowling racks and crushed heads Liners, HP600e Classics can also be used HP500 slinging type Liners | Motorsportology Configuration smashing the cavity, Liners Installation and total Revision |
| Others HPe / HP Generational | This page does not make similar appearances or Series Names as confirmed compatibility relationships | Verification by item complete model, cavity profile, drawing number, Remodeling Condition and Key dimensions |
| No backpacking Liners | HPe Series Provides a backless liner Liners But the original factory clearly stated that it is not applicable All Specifications | model, cavity profile, Liners Revision, Head and Bowlers Interfaces |
Please provide HPe complete model, serial number, cavity profile Physiology of Sport Configuration, drawing number or spare parts, Drawing Revision, installation position, photos of used parts and Key dimensions.
Can't just press Series Name judgment. HP450e and HP400, HP600e and HP500 The majority of the public parts Compatibility basis, but still must be cavity profile, Upgrades Condition, drawing number and size is confirmed by item.
No. no back lining Liners Not applicable All Specifications; need to be verified model smashing the cavity, Liners Revision and crushing head, bowls Interfaces.
Provide HPE complete model, serial number cavity profile and athletic configurations namesplate numbers drawing numbers of used parts as well for key dimensions. We are able to accomplish part recognition process identification processes in the field; material assessment systems work with manufacturing organizations (factories), quality control system operations - finished-part delivery
Phone: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with coordinated consulting, supplier sourcing, quality control and finished-part delivery for custom parts, wear parts and industrial spares from China, with scope to support other custom industrial parts.
Equipment and part identification, drawing review, material selection and manufacturing feasibility assessment.
Match requirements with suitable manufacturers in China and coordinate the exchange of technical information.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
Coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts.
Provide the existing model, drawings, drawing or part numbers, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry