Models, liners, drive, support and hydraulic spares for large mining secondary, tertiary and pebble crushing installations, with supply to drawing.
Metso MP Series uses a rotating bowl, hydraulic tramp release and automatic discharge-setting adjustment. The manufacturer's published specifications (2024) list MP800, MP1000, MP1250 and MP3000. MP2500 remains covered by manufacturer upgrade support and is retained here for legacy installation identification.
MP800, MP1000, MP1250 and MP3000 capacity ranges follow Metso's 2024 handbook at different closed-side settings. Equipment selection and spare-part manufacture must not infer part geometry from capacity.
| Model | Published capacity range (mtph) | Machine weight | Installation status |
|---|---|---|---|
| MP800 | 495–2190 | 120,570 kg | Manufacturer specifications (2024) |
| MP1000 | 615–2920 | 153,124 kg | Manufacturer specifications (2024) |
| MP1250 | 770–3645 | 153,985 kg | Manufacturer specifications (2024) |
| MP3000 | 1695–7000 | 450,000 kg | Manufacturer specifications (2024) |
| MP2500 | Confirm against installation drawings and chamber | Confirm from installation records | Legacy model with manufacturer upgrade support |
Images illustrate generic cone crusher part categories. Confirm MP profiles, dimensions, hole patterns, mounting and materials against the model, chamber and drawings.
Mantle / Head Liner
Mounted on the crushing head, the mantle withstands high compression and abrasion. Check chamber profile, contour, thickness, locking structure and drawing number.
View the common part page →
Bowl Liner / Concave
Mounted inside the bowl, it forms the crushing chamber with the mantle. Check standard / short-head configuration, feed opening, CSS, contour and mating surfaces.
View the common part page →
Feed Plate / Feed Cone
Located above the crushing head, it distributes feed and withstands impact and sliding wear. Check profile, fastening, feed conditions and lifting interfaces.
View the common part page →
Main Frame Liner
Protect the inner main frame and falling-material area. Check segmentation, thickness, hole pattern, seating surfaces and observed wear direction.
View the common part page →
Frame & Arm Guards
Protect frame arms and their material-facing surfaces. Check installation position, left / right orientation, holes and the material flow path.
View the common part page →Counterweight & Lower Guards
Protect the counterweight, lower frame and discharge area. Check segmentation, clearances, fasteners and machine rotation direction.
View the common part page →For MP large assemblies and precision-fit parts, check OEM drawing and part numbers, materials, heat treatment, interface dimensions, clearances and inspection requirements separately.
Main Frame & Main Shaft Assembly
The load-bearing datum of the machine and its fixed main-shaft structure. Check casting revision, shaft dimensions, datum surfaces, liner interfaces and nondestructive testing requirements.
Submit Drawings and Dimensions →Bowl & Adjustment Ring Assembly
Includes the bowl, adjustment ring, clamping ring, adjustment mechanism and clamping-cylinder interfaces. Confirm standard / short-head configuration and upgrade status.
Submit the Model and Drawing Number →Head Assembly
Includes the head, mantle interface, feed plate connection and locking structure. Check head revision, chamber profile, bushings and lock-nut configuration.
Submit the General Arrangement and Drawing Number →
Socket & Socket Liner
Support the head under oscillating contact loads. Check spherical radius, thickness, oil grooves, material and contact condition.
View the common part page →
Eccentric Assembly & Bushings
Generate eccentric motion while maintaining sliding fits. Check eccentricity, inside and outside diameters, oil grooves, interference fits, copper alloy and gear interface.
View the common part page →
Countershaft Box, Shaft & Bushings
Transmit torque from the drive to the eccentric assembly. Check bearing seats, keyways, end connections, seals and bushing fits.
View the common part page →Gear & Pinion
Transmit main-drive torque. Check tooth count, module, pressure angle, helix angle, rotation direction, matched-pair markings, material and heat treatment.
View Gear Components →
Clamping, Tramp Release & Hydraulic Parts
Maintain the setting and release loads during tramp-metal events. Check cylinder revision, pressure, stroke, seals, piping and HPU configuration.
View the common part page →Dust Sealing & Lubrication System
Protect sliding surfaces and control oil temperature, filtration and flow. Check seal type, oil grade, filters, pumps, coolers and connections.
View Seal Components →Upgrades can change assembly structures, interfaces and spare-part lists. Use the table to identify installation status; actual supply requires the manufacturer's upgrade revision and site drawings.
| Upgrade / system | Metso's published application range | Quotation checks |
|---|---|---|
| 5th Generation MP HPU | MP800 / MP1000 / MP1250 | HPU revision, pressure, flow and interfaces |
| Jackscrew locknut | MP800 / MP1000 / MP1250 | Locknut and head configuration |
| Top-mount clamping cylinders | MP800 / MP1000 / MP1250 / MP2500 | Clamping ring, cylinder and piping revisions |
| Hydraulic socket | MP800 / MP1000 / MP1250 | Socket and hydraulic removal interfaces |
| Split tramp cylinder nut | MP800 / MP1000 / MP1250 / MP2500 | Tramp cylinder, nut and retention structure |
| Enhanced head / Xtreme forged head | MP800 and larger models | Head revision, main-shaft and liner interfaces |
| MP1250 upgrade | MP1000 | Upgrade kit revision and machine modification records |
Provide the complete MP model, serial number, chamber, drawing or part number, drawing revision, installation position, used-part photographs and key dimensions.
No. Interfaces, dimensions and load requirements differ by model, chamber, configuration and modification status. Verify every part against complete installation information.
Metso's current upgrade information still lists applicable MP2500 upgrades, so its spare-part identification entry is retained. Specific parameters must follow that machine's nameplate and drawings.
Provide the complete MP model, serial number, chamber, nameplate, drawing number, used-part photographs and key dimensions. We use these for identification, material assessment, manufacturing coordination, quality control and finished-part delivery.
Phone: +86 156 3797 3199
zzx@anranst.com
ANRANST helps customers worldwide source custom parts, wear parts and industrial spares from China, coordinating technical advice, suppliers, quality control and finished-part delivery. The service can also extend to other custom industrial components.
Equipment and part identification, drawing checks, material selection and manufacturing feasibility assessment.
Material grades and heat-treatment processes are specified order by order, confirmed in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production monitoring, inspection and acceptance coordination.
Coordinate manufacturing, quality confirmation, packaging and delivery of finished parts through a practical supply process.
Send the model, drawings, drawing or part numbers, material and operating conditions so we can define the technical checks and supply route.
Send Your Requirements