VXPmill and Screw-type mills Tower Mill parts Is it universal?

VXPmill uses a modular mixing shaft with removable plates and enclosures, spiral turret using screw mixers; parts of the connector to be used in its own models or drawings must confirm.

VXPmill Cores Wear-Resistant Materials What is it?

FLS Current information indicates that the contact parts of a mineral slurry are used in polyurethane, mixing plates for solid polymerate and at top with polyesterated medium to keep screen. The specific formulation is still confirmed according machine drawings (the molding), media & operating conditions).

RFQ VXPmill What information is needed for the slab and a sewer?

Full model, serial number / OEM or third party numbers are required; plate layout diagrams and plates & enclosure dimensions need to be arranged in full format. The frame is also needed for wheel-axis interface with materials (photons of used parts), grinding medium speeding up the millet'S diameter as well a record on wear from scrap metal lamination machines

FLS VXPmill: Modular Disc Stirred Mills and Core Spare Parts

FLS Current Official Site VXPmill The sweeping side of the map, Identification Up-topping drive, vertical grinding chambers and platforms.

FLS Current Official Site VXPmill Face-tolls for the verification of grinding chamber, drive rack and maintenance platform Interfaces.

FLS Original factory maintenance video image: the grinding cavity opens and visible modular disk stack, proving that Equipment No Screw-type mills Tower Mill Construction.

OEM Equipment Details

Screenshell VXPmill and Screw-type mills The stalk is clearly separate

VXPmill uses a modular mixing shaft of disassemblable plates and sieve sets, which allow the pulp to enter from bottom up through an inch cavity while maintaining its filter flow overflow via top media. The page lists only items related with wear parts; ordinary spare pieces: drawing number check-out & maintenance workpiece

3 Current/install Model No Identification Walk

5 Abrasion and wear-resistant Contact s

4 Axle and Structural Parts

2 Original factory maintenance system

Models and Key Dimensions

Current product family and proven Model No

FLS' current official website does not disclose a full standard configuration list that can be directly used for bookings of spare parts; this table lists only traceable existing product family and installation model, missing dimensions are non-computing.

Series / Model	Public Identification Information	Key dimensions / Capability	Properties	spare parts Border-checking
VXPmill Current Product Categories	Specific grinding tasks Custom Pieces of disc Quantity, the disc spacing Grinding Media Loading and Speed	Typical product granularity is lower 30 μ m; the current official website has not issued a uniform standard size table	Current Series	nameplate, serial number, Complete Configuration smearing cavity general arrangement drawing Maps with diskette
VXP2500	FLS Posted Kibali The installation information is explicitly used. model	Public installers are not available as a function spare parts The uniform diameter and length based	Verified installation Model No	by Item nameplate axis, disks Quantity, and the sewers screen media Graphics Confirmation
VXP10000	Public Item Technology Archives Records VXP mill Package	mill Tracks intrameters 1.90 m Effective Length 5.07 m; Installed Power 3.0 MW	Item Archives model	The above dimensions are only appropriate Item Recording, not to be pushed All VXP10000 Installer

Wear Parts

Pieces, enclosure and grinding chamber polyurethane spooling and Media retention Screensaver

Streaming through the plate from bottom by pulp and stream Grinding Media Streaming upwards in the grinding cavity and spreading out of a path spilled from top.

Modular Impeller Discs

Modular Impeller Disc

The disk is arranged along the axis and acts on a Ceramic grinding medium, which forms VXPmill's core workpiece. Converging complete model with plate outer diameter & thicknesses; pores systems: hub interface (installation height), volume of plates - spacing or rotational direction

Materials and Manufacturing: FLS Openly showing the disc is solid polyurethane; the recipe, Hardness Hubs, Wheel Construction and the molding process remains according to original, drawing number and operating conditions Confirmation.

Rubber and Polyurethane

View Part Details →

Impeller Disc Spacers

Impeller Disc Spacer

The partition determines the axial position of a disk and its internal energy distribution. Contrast inner-external diameter, length end surface toothpaste; key/wavy button or clamping interface: sequence for plate combination with shaft pressing mode

Materials and Manufacturing: Open information confirms that it is a disassemblable module, but not all installed compartment. materials; materials, surface and co-operation must be confirmed by drawings or in kind.

Rubber and Polyurethane Alloy Steels for Drive Parts

View Part Details →

smearing polyurethane sling

Grinding Chamber Polyurethane Lining

Protecting the contact surface of vertical grinding chambers with all mineral pulp, withstand continuous abrasion between fine grain and curamic medium. Contrast tube diameter; thicknesses: partitionage (interface); flange - inlet outlet & field repair boundary).

Materials and Manufacturing: FLS Public statements VXPmill the slurry of mines Contact Parts Apply polyurethane slate; and the recipe, Hardness, bonding/mechanical fixation and repair process confirmed by install.

Rubber and Polyurethane

View Part Details →

Top Media retention Screensaver

Media Retention Screen

The sieve hole, opening aperture rate and outer diameter are determined to be high in the upper flow area of grinding chamber. Consolidation is made between sealing holes; open anopion ratio (APR), height: partial structure - fixed mode as well AS top disc gap

Materials and Manufacturing: FLS The current product page is clear polyurethane Media retention Screensaver; Sieve holes, bearing and materials Condition Must be confirmed by target granularity, medium size and drawings.

Rubber and Polyurethane

View Part Details →

Base feed and sludge substrate

Bottom Feed and Media-Drain Linings

The bottom feed channel and the discharge medium link to a grinding chamber; repairing time ceramic media is poured into temporary storage tanks through its base valve. Converging channels outline, flanges or seats of Valves/Valves & Floorings (Flag), core elements as well AS interface with an Acrylic cavity

Materials and Manufacturing: With mineral slurry or medium Contact The slinging of the polyurethane, Engineering elastic and valve seat pairing materials Confirmation: Cannot be used with ordinary turrets Feed Liners drawing number Alternatives.

Rubber and Polyurethane Engineering Materials for Seals

View Part Details →

Spare Parts

Mixing shafts, wheels and bearing Bearings, drive connections and bottom Valve parts

General Power Transmission Pieces and Construction Separate check-in; not disclosed materials or part number Item No guessing, by nameplate, BOM, drawings and old pieces as well the installed dimensions.

Mixing shafts, hub and axis fasteners

Impeller Shaft, Hubs and Axial Fasteners

Transfer the drive torque and locate disks with sleeve. Converge total length, diameter of axle bearing positioning on an coupling end to wheel hub key/wafer threaded stringings in relation between shaft pre-tightnesses as well ASCO degree movement balance requirements for NDT

Materials and Manufacturing: Axle system materials not to be inferred by appearance; usually from Alloy Steels for Drive Parts The system screening, the final numbering. heat treatment, mechanical properties and surface requirements are confirmed by the drawings.

Alloy Steels for Drive Parts

View Part Details →

Upper bearing -, and the Sponsor Part / Assembly

Upper Bearing and Support Assembly

The axis is mounted and the discs are maintained. Contrast bearing codes, gaping spaces; axle/seat combination: Lubrication of terminal coveres or sealings for attachment to seats as well load-loaders with positional interface on drive rackS &apos);

Materials and Manufacturing: bearing, bearing housing, tightening and lube materials By the original code, and by loading. Speed, temperature rise and accuracy confirmation.

Alloy Steels for Drive Parts Engineering Materials for Seals

View Part Details →

Motors, coupling and drive rack connections

Motor, Coupling and Drive-Frame Components

The torque is entered by the upper-hand drive vertical shaft. Converging motor power with speed, frequency conversion configurations and coupling models of aperture diameter key to tightening lid on it; shielded installation height as well ASA holes in its driving gear

Materials and Manufacturing: the coupling, Shaft Sleeve, connecting shafts and fasteners By torque, fatigues and twitches materials Confirmation that the general deceleration machine is not used parts Directly Used VXPmill.

Alloy Steels for Drive Parts

View Part Details →

The bottom valves, flanges and sealing Part / Assembly

Bottom Valve, Flange and Sealing Components

Used for operation of isolation, smearing and cleaning the drain media. Valve reconciliation Type, Passage and pressures; flange: valve seating. Benchlining | The coupling of the container tube with temporary storage canal pipeline

Materials and Manufacturing: Valve body, seating position and elastics materials By the slurry, ceramic Media, corrosion and pressures are confirmed with on-site cleaning media.

Specialty Alloys Engineering Materials for Seals

View Part Details →

Specialized Tooling

Screenscrew repair bench, screen suspension and medium-sized emission storage system

Below are FLS VXPmill Original factory maintenance video or current product page directly supported, pictures and instructions are only targeted VXPmill Maintenance process.

Screens and screen-mounting

Disc Maintenance Table and Lifting Tool

FLS Original maintenance video display plates are removed, positioned and mountable on special inspection benches. The workpiece must be designed according to the diameter of platelets; weights: ceiling points (top), working height - orbital/table surface-tower design); locking & field space

View FLS Original factory maintenance video

Medium-sized and temporary storage systems

Media Drain and Temporary Holding System

Before the inspection, wash mills and open valve to put ceramic media into temporary storage tanks. This creates a safe space for plate maintenance by checking container capacity of containers with lockers; check tank volume: Valve & screening - pumped through pipes or medium reload path

View FLS Original factory maintenance video

Materials and failures Template: Ways

polyurethane Bursting of mineral Contact Zones, axis materials Contrast torque and fatigue

The core material path of the plate, grinding lining and top media is polyurethane; formulations are required to match milling medium with mineral plasma temperature speed as well AS machine structure.

polyurethane Abrasion system Pieces and grinding chamber Contact Surface, maintenance sieve and mineral pulp channel substrate Alloy Steels for Drive Parts Stand-alone, wheel hubs and coupling units with high cycle fatigue connections Engineering Materials for Seals The bottom pad, flange and external seal Interfaces Corrosion-resistant and Special Alloys corrosive mineral slurry Valve parts, Connections and Localities Construction s

Drawing and Spare Part Numbers

Relating the plates, scaffold and axle numbers to specific plate layout

Full model, serial number and plate layout diagrams are provided at the time of submission; disk volume is available to be distinguished from interval between space/wheel axis interface. The screen hole cantilever size shall also provide photons for used parts (material), grinding medium or wear record

Send Your FLS OEM Drawing Number Converged BOM, Drawing Revision, the location of disk and materials Submission to third parties spare parts No Comparisons and accessories Model, Key dimensions and materials Delivering abrasion and operating records Contrast plates, linings and screen media failure Location

VXPmill With Spiral Tower Mill parts Can we be generic?

Cannot. VXPmill It is a modular mixing shaft for the plate/septum, FTM The spiral turret mill Screw Agitator) Reconciliation must be done separately model axis, axle and grinding chambers screen media, Interfaces and the fittings.

Why model Does the table not show more dimensions?

FLS does not publish a full standard scale for direct subscriptions to Spare parts on its current official website; the site only publicly publishes traceable data from existing product groups and known installed records, other install by nameplate.

FLS VXPmill: Modular Disc Stirred Mills and Core Spare Parts

Screenshell VXPmill and Screw-type mills The stalk is clearly separate

Current product family and proven Model No

Pieces, enclosure and grinding chamber polyurethane spooling and Media retention Screensaver

Modular Impeller Discs

Impeller Disc Spacers

smearing polyurethane sling

Top Media retention Screensaver

Base feed and sludge substrate

Mixing shafts, wheels and bearing Bearings, drive connections and bottom Valve parts

Mixing shafts, hub and axis fasteners

Upper bearing -, and the Sponsor Part / Assembly

Motors, coupling and drive rack connections

The bottom valves, flanges and sealing Part / Assembly

Screenscrew repair bench, screen suspension and medium-sized emission storage system

Screens and screen-mounting

Medium-sized and temporary storage systems

polyurethane Bursting of mineral Contact Zones, axis materials Contrast torque and fatigue

Relating the plates, scaffold and axle numbers to specific plate layout

VXPmill With Spiral Tower Mill parts Can we be generic?

Why model Does the table not show more dimensions?

Submission FLS VXPmill model, plated plates and partitions or need for axes

From Technical Assessment to Finished-Part Delivery

Technical Advice

Supplier Introductions

Quality Control

Finished-Part Delivery