SAG MILL LINER SYSTEM
SAG مطحنة البطانة الأنظمة
Wear parts for high-impact grinding, feed ends and grate discharge, plus drive spares
A semi-autogenous mill uses the ore itself and a limited charge of steel balls for coarse grinding. A complete spare-parts enquiry must cover shell and end liners, the grate-discharge system and drive spares, rather than referring to every item simply as a liner.
System scope
المعدات المركبة identification OEM, series, full model designation, serial number and year
الأبعاد الرئيسية Internal shell diameter, effective length, end interfaces, hole positions and plate thickness
ظروف الطحن Feed size, ore characteristics, grinding balls, speed, filling level and throughput
Delivery scope Liner zones, discharge system, fasteners, identification marks and installation documents
Build the BOM from the installed mill, liner layout and discharge arrangement
SAG mills of the same diameter may differ in shell length, feed-end design, grate openings, pulp lifters, hole patterns and drive configuration. Manufacturing requires the full model designation, serial number, drawing revision and measured dimensions.
قطع الغيار المستهلكة
Feed-end and shell liners withstand large-rock impact and abrasive wear
Open each product to review its installation position, materials, drawing references and enquiry requirements.
Feed inlet
بطانة حلق التغذية
Protects the feed throat and guides large ore particles into the shell. Check internal and external profiles, flange hole pattern, axial length, interfaces and impact direction.
Outer feed-end ring
البطانة الخارجية لغطاء طرف التغذية
Protects the outer ring of the feed head and meets the shell lining. Confirm segment geometry, hole positions, thickness, adjacent clearances and backing support.
Inner feed-end ring
البطانة الداخلية لغطاء طرف التغذية
Connects the throat lining to the head lining and withstands feed impact and cyclic grinding-media loads. Check the conical surface, center interface, hole pattern and direction of rotation.
Shell grinding zone
بطانات الجسم وألواح رفع المواد
Protect the shell and control the lifting, cataracting and cascading of ore and steel balls. Profile, height, spacing and worn contour directly influence grinding behavior.
Discharge-end transition
Intermediate Discharge-End Liner
Sits between the shell and grate-discharge structure, protecting the transition and maintaining continuity with adjoining parts. Check segmentation, hole positions and mating interfaces.
Liner connection zone
حلقات التعبئة
Fills local structural gaps in the lining system and maintains continuity of the liner arrangement. Verify position, curvature, cross-section, hole locations and adjacent-part dimensions.
Grate-Discharge System
Check discharge grates, pulp lifters and discharge cones as one continuous system
Openings, channel volume, direction of rotation and end interfaces jointly determine discharge capacity and material retention.
Screening and discharge inlet
شبكة التفريغ
Controls the entry of slurry and correctly sized particles into the discharge chamber. Check slot size, open area, plate thickness, blinding, passage of broken grinding balls and the fastening arrangement.
Inner discharge chamber
رافع الملاط الداخلي
Receives slurry passing through the grate and conveys it toward the center. Vane geometry, channel volume, direction of rotation and adjacent clearances must be checked together.
Outer discharge chamber
رافع الملاط الخارجي
Forms a continuous flow path with the inner lifter, grate and discharge cone. Confirm end interfaces, vane direction, support and wear allowance.
Central discharge outlet
مخروط التفريغ
Directs slurry from the pulp lifters toward the trunnion or downstream passage. Check cone angle, internal and external diameters, flanges, hole positions and wear lining.
Complete lining system
مسامير البطانة ونظام التثبيت
Secure the rotating liners while maintaining sealing and preload. Verify head shape, thread, grip length, washers, seals, lubrication and the tightening method.
قطع الغيار · Drive System
Specify girth gears and pinions as a matched mesh, with defined accuracy and mounting datums
Drive parts are separate from liners but are high-value SAG mill spares. Their drawing references, materials, tooth system and inspection records require separate identification.
Main drive
Girth Gear / Ring Gear
Verify tooth system, module, tooth count, pressure angle, helix angle, split construction, flange hole pattern, runout and tooth-flank accuracy.
Main drive mesh
ترس القيادة الصغير
Check compatibility with the mating girth gear, tooth-flank accuracy, shaft journals, coupling interfaces, heat treatment, non-destructive testing and tooth contact.
Load carrying and support
Bearings, Bearing Liners and Support Spares
Specify bearings, bearing liners, seals, lubrication interfaces, housings and cooling arrangements for the actual mill support design. Do not assume interchangeability between models.
Materials, الموقع، والمادة، والأعطال and Performance
High-impact SAG duties require adequate material toughness first
These material families have defined application limits. They are not universal commitments to a particular grade, hardness or service life for every mill.
Lining selection: Mill heads, shells, discharge systems and trunnions serve different functions. Metso mill-lining options include metal, rubber and composite systems for these zones, with high-impact SAG duties requiring particular attention. Replacement parts must be specified against installed-equipment drawings and site operating conditions. Metso Mill Liners · Metso Grinding Mill Parts
ظروف التشغيل وأنماط الأعطال
Assess the system through wear profiles, crack locations and discharge performance
The hardness of one part cannot explain the life of the complete lining system or the mill throughput.
| Observed condition | الفحوصات ذات الأولوية | Material and design considerations |
|---|---|---|
| Premature lifter height loss or fracture | Large-rock impact, profile, spacing, speed, filling level, backing support and stress around holes | Ensure toughness and continuous support first, then improve profile retention and wear resistance |
| Uneven feed-end liner wear or loosening | Uneven feed distribution, lump size, segmentation, hole positions, seating, bolt preload and adjacent clearances | Select materials by impact zone and restore backing contact and the complete fastening system |
| Grate blinding or reduced discharge capacity | Slots, open area, broken grinding balls, slurry concentration, lifter capacity, direction of rotation and channel wear | Optimize grates, inner and outer pulp lifters and the discharge cone together; avoid changing a slot in isolation |
| Erosion perforation of discharge parts | Local flow velocity, backflow, particles, channel geometry, thickness and steps between adjacent parts | Select wear materials by flow zone and check transitions and replaceable working surfaces |
| Gear pitting, uneven loading or abnormal vibration | Girth-gear runout, mounting datums, contact pattern, lubrication, bearings, alignment and tooth-flank accuracy | Restore accuracy and maintain heat-treatment and installation records for the matched gear pair |
RFQ and ضبط الجودة
Enquiry Requirements for SAG Mill قطع الغيار المستهلكة and Spares
These details define the BOM, drawing references, materials, manufacturing, inspection, installation sequence and delivery scope.
تحديد الطاحونة
OEM, full model designation, serial number, year of manufacture, internal shell diameter, effective length, direction of rotation and drive type.
Lining and discharge drawings
General arrangement, liner layout, grate and lifter configuration, discharge cone, hole positions, direction of rotation and adjacent-part relationships.
Drawing references and key dimensions
OEM drawing numbers, part numbers, revisions, curvature, thickness, profiles, interfaces, hole spacing, weights and fasteners.
ظروف الطحن
Ore, feed size, abrasiveness, grinding-ball specification, filling level, speed, slurry conditions, throughput and discharge performance.
Existing parts and failure history
Material, hardness, installation date, service life, remaining thickness, wear measurements, cracks, loosening and failure photographs.
الفحص والتسليم
Material, heat treatment, dimensions, non-destructive testing, weight, trial assembly, zone identification, BOM, fasteners and installation documents.
الأجزاء والمعدات ذات الصلة
Connect SAG mill designs, OEM models, parts and materials
Explore mill design and operating conditions, identify OEM series and drawing references, and review individual parts for materials, dimensions and enquiry requirements.
SAG Mill المعدات Explore the machine structure, principal systems and related general-purpose parts.
العلامات التجارية والموديلات الأصلية Identify the installed equipment by brand, series, full model designation and historical configuration.
General Liners and Wear Plates Compare liner functions and material options across equipment positions.
Gears and Pinions Review drive-part materials, accuracy, heat treatment and enquiry requirements.
Materials and Manufacturing Processes Select candidate material families by operating conditions, failure modes and manufacturing constraints.
Request a Quote for SAG Mill Liners, Discharge Systems and Spares
Submit the full model designation, liner layout, OEM drawing references, key dimensions, materials, operating conditions, service life and failure information.
خدمات صنع في الصين
من التقييم الفني إلى تسليم المنتج بالكامل
توفر شركة ANRANST للعملاء العالميين تقييمات هندسية، واختيار التصنيع الصيني، ومراقبة الجودة، وتسليم الأجزاء النهائية لقطع الغيار الصناعية المقاومة للتآكل حسب الطلب، ويمكنها أيضًا دعم قطع الغيار الصناعية الأخرى حسب الطلب.
مراجعة الرسومات والهندسة
قم بمراجعة أسطح التزاوج وأبعاد الواجهة، وقم بتقييم جدوى المواد والمعالجة الحرارية والتصنيع.
تحديد المادة والمعالجة الحرارية
تُحدَّد درجات المواد وعمليات المعالجة الحرارية لكل طلب على حدة، وتُثبَّت في الاتفاقية الفنية وتُتابَع أثناء الإنتاج.
ضبط الجودة
يشمل ذلك تأكيد الرسم، ومراقبة المواد والعمليات، وتتبع الإنتاج، وتنسيق عمليات الفحص والقبول.
تسليم المنتج النهائي
تنظيم عمليات التصنيع والتحقق من الجودة والتعبئة والتغليف وتسليم المنتجات النهائية الكاملة لتشكيل حلقة إمداد قابلة للتنفيذ.
قم بتزويدنا بالنماذج الحالية، والرسومات، وأرقام الرسومات، وأرقام الأجزاء، والمواد، أو معلومات ظروف التشغيل، وسنقوم بتحديد التحقق الفني ومسار التوريد وفقًا لذلك.
إرسال طلب