
MD Woven Wire Screen Mesh
Woven Wire Screen Mesh
For MD dry classification; check the deck, aperture, wire diameter, effective width and length, and tensioning edges.
View Parts and Materials →MD DM / SM / DMX dry screens and dewatering screens — match screening media, supports and excitation parts to each design.


Selection and drawing-based supply of screen mesh, panels, liners and support spares. MD screens use woven wire mesh; dewatering screens use heavy-duty polyurethane media. Their apertures, supports and fixing systems require different parts.
Provide the full model, deck, screen width and length, aperture, wire diameter or panel thickness, and fixing method.
| Type | Decks / Excitation Configuration | Screening Media and Dimensions |
|---|---|---|
| MD Type DM | Two eccentric vibratory motors; commonly 5 decks | Woven wire mesh; check apertures for each deck |
| MD Type SM | One eccentric vibratory motor; 1–4 decks | Woven wire mesh; check tensioning edges and screen frame |
| MD Type DMX | Two eccentric vibratory motors; typically 3–5 decks | Large multi-deck models; check the installed configuration |
| MD Size Range | Configured for the model and application | Screen widths of 19–78 in (approximately 48–198 cm as stated by the OEM) |
| Dewatering Screen | Counter-rotating vibratory motors; mechanical exciters on larger installations | Polyurethane screening media and longitudinal support system; match the installation drawing |
The numbers on the diagram correspond one to one with the rows below.

| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Screen box | Red inclined MD screen box | MD Vibratory Screen |
| 1 | Screen box | Red load-bearing dewatering screen box | Dewatering Screen twin-motor configuration |
| 2 | Vibrator motor | Grey vibrator motor in the lower OEM DMX2036 rear photograph | DMX2036 |
| 2 | Vibrator motor | Twin vibrator motors above the dewatering screen | Dewatering Screen twin-motor configuration |
| 3 | Support spring | MD compression spring in the lower-right close-up | MD Vibratory Screen |
| 4 | Support frame | Black support frame below the MD screen box | MD Vibratory Screen |
| 5 | Screen surface | Screen surface carrying material and draining water | Dewatering Screen twin-motor configuration |
Select MD woven wire mesh and dewatering screen polyurethane panels separately. The screening media images below illustrate generic products, not McLanahan OEM parts.

Woven Wire Screen Mesh
For MD dry classification; check the deck, aperture, wire diameter, effective width and length, and tensioning edges.
View Parts and Materials →
Polyurethane Dewatering Panels
For dewatering screens, not a direct replacement for MD woven mesh. Check apertures and longitudinal support connections.
View Parts and Materials →Feed, Side & Discharge Liners
Match existing liner positions and bolt-hole drawings to protect impact and sliding wear areas.
View Parts and Materials →MD screens use direct motor excitation without conventional reducers, pulleys or belts. Check mechanical exciters on large dewatering screens against their nameplates.
Deck Frames & Supports
Check the MD frame or dewatering screen longitudinal support system separately. Provide sections, mounting-hole spacing and connection drawings.
View Parts and Materials →Tensioning & Panel Fixings
For MD screens, check tensioning edges and optional pneumatic tensioning. For dewatering screens, check longitudinal polyurethane connections.
View Parts and Materials →Support Springs & Elastic Elements
Check free height, outside diameter, stiffness, quantity and mounting positions to preserve the screen's vibration characteristics.
View Parts and Materials →Vibratory Motors & Exciters
Check motor quantities for MD DM, SM and DMX models. Distinguish motor excitation from large mechanical exciters on dewatering screens.
View MD Maintenance Information →No direct substitution is possible. The applications, motion, decks and fixing systems differ. Select the screening media from the specific screen model and installation drawing.
Provide the model, serial number, photographs of the existing part, any known drawing and critical dimensions. ANRANST provides drawing and engineering review, production at certified foundries, in-factory inspection and finished-part delivery. OEM names identify equipment and do not imply OEM authorization.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry