MD DM / SM / DMX dry screens and dewatering screens — match screening media, supports and excitation parts to each design.
Selection and drawing-based supply of screen mesh, panels, liners and support spares. MD screens use woven wire mesh; dewatering screens use heavy-duty polyurethane media. Their apertures, supports and fixing systems require different parts.
Provide the full model, deck, screen width and length, aperture, wire diameter or panel thickness, and fixing method.
| Type | Decks / Excitation Configuration | Screening Media and Dimensions |
|---|---|---|
| MD Type DM | Two eccentric vibratory motors; commonly 5 decks | Woven wire mesh; check apertures for each deck |
| MD Type SM | One eccentric vibratory motor; 1–4 decks | Woven wire mesh; check tensioning edges and screen frame |
| MD Type DMX | Two eccentric vibratory motors; typically 3–5 decks | Large multi-deck models; check the installed configuration |
| MD Size Range | Configured for the model and application | Screen widths of 19–78 in (approximately 48–198 cm as stated by the OEM) |
| Dewatering Screen | Counter-rotating vibratory motors; mechanical exciters on larger installations | Polyurethane screening media and longitudinal support system; match the installation drawing |
The MD width range does not specify each model's dimensions. Confirm apertures, decks and drive parameters from the nameplate and screen drawings.
Select MD woven wire mesh and dewatering screen polyurethane panels separately. The screening media images below illustrate generic products, not McLanahan OEM parts.
شبكة غربلة سلكية منسوجة Mesh
For MD dry classification; check the deck, aperture, wire diameter, effective width and length, and tensioning edges.
Materials and Operating Conditions: The OEM lists mild carbon steel and stainless steel mesh. Select the material for abrasion and corrosion conditions.
View Parts and Materials →
Polyurethane Dewatering Panels
For dewatering screens, not a direct replacement for MD woven mesh. Check apertures and longitudinal support connections.
Materials and Operating Conditions: Polyurethane combines elasticity with wet abrasion resistance. Panel stiffness and connection strength must support the heavy material bed.
View Parts and Materials →Feed, Side & Discharge Liners
Match existing liner positions and bolt-hole drawings to protect impact and sliding wear areas.
Materials and Operating Conditions: Consider elastomeric liners for impact areas and wear-resistant steel for sliding wear, while preserving the flow path.
View Parts and Materials →MD screens use direct motor excitation without conventional reducers, pulleys or belts. Check mechanical exciters on large dewatering screens against their nameplates.
Deck Frames & Supports
Check the MD frame or dewatering screen longitudinal support system separately. Provide sections, mounting-hole spacing and connection drawings.
Materials and Operating Conditions: Confirm structural materials, welding and fatigue requirements from the original design; select protective liner materials separately.
View Parts and Materials →Tensioning & Panel Fixings
For MD screens, check tensioning edges and optional pneumatic tensioning. For dewatering screens, check longitudinal polyurethane connections.
Materials and Operating Conditions: Match metal fasteners and elastomeric connectors separately to the mounting design.
View Parts and Materials →Support Springs & Elastic Elements
Check free height, outside diameter, stiffness, quantity and mounting positions to preserve the screen's vibration characteristics.
Materials and Operating Conditions: Identify the rubber plugs inside MD compression springs separately from the load-bearing spring steel elements.
View Parts and Materials →Vibratory Motors & Exciters
Check motor quantities for MD DM, SM and DMX models. Distinguish motor excitation from large mechanical exciters on dewatering screens.
Materials and Operating Conditions: Specify bearings, eccentric parts, load-bearing housings and seals for the load, speed and lubrication conditions.
View MD Maintenance Information →No direct substitution is possible. The applications, motion, decks and fixing systems differ. Select the screening media from the specific screen model and installation drawing.
يرجى توفير الطراز والرقم التسلسلي وصور القطعة الحالية وأي رقم رسم معروف والأبعاد الحرجة. توفر ANRANST مراجعة الرسومات والهندسة والإنتاج في مسابك معتمدة والفحص داخل المصنع وتسليم القطع النهائية. تُستخدم أسماء الشركات المصنعة الأصلية لتحديد المعدات ولا تعني تفويضًا منها.
رقم الهاتف: +86 156 3797 3199
zzx@anranst.com
توفر شركة ANRANST للعملاء العالميين تقييمات هندسية، واختيار التصنيع الصيني، ومراقبة الجودة، وتسليم الأجزاء النهائية لقطع الغيار الصناعية المقاومة للتآكل حسب الطلب، ويمكنها أيضًا دعم قطع الغيار الصناعية الأخرى حسب الطلب.
قم بمراجعة أسطح التزاوج وأبعاد الواجهة، وقم بتقييم جدوى المواد والمعالجة الحرارية والتصنيع.
تُحدَّد درجات المواد وعمليات المعالجة الحرارية لكل طلب على حدة، وتُثبَّت في الاتفاقية الفنية وتُتابَع أثناء الإنتاج.
يشمل ذلك تأكيد الرسم، ومراقبة المواد والعمليات، وتتبع الإنتاج، وتنسيق عمليات الفحص والقبول.
تنظيم عمليات التصنيع والتحقق من الجودة والتعبئة والتغليف وتسليم المنتجات النهائية الكاملة لتشكيل حلقة إمداد قابلة للتنفيذ.
قم بتزويدنا بالنماذج الحالية، والرسومات، وأرقام الرسومات، وأرقام الأجزاء، والمواد، أو معلومات ظروف التشغيل، وسنقوم بتحديد التحقق الفني ومسار التوريد وفقًا لذلك.
إرسال طلب