Brand and History
Grinding mill and wear-part RFQ data
To route your enquiry, provide the equipment model, drawing or part number, interfaces and duty. This reference covers the CITIC HIC equipment families published on this page only.
From Luoyang Mining Machinery Plant to CITIC HIC
CITIC HIC originated as Luoyang Mining Machinery Plant, built during China's First Five-Year Plan. Historical nameplates, equipment series and original drawings help identify existing mining installations and their spare parts.
Key Equipment
Mining Machines and Equipment Series
Grinding mills, crushers and high-pressure grinding rolls with related wear parts, drive spares and custom part requirements.
SAG Mill
SAG Mill
Identify SAG installations by shell dimensions, discharge arrangement, liner system, drive spares and known drawing numbers.
View Equipment Series →
Autogenous Mills
AG Mill
Identify AG installations by series and project-specific shell dimensions, then review shell liners, end liners, grates, pulp lifters and drives.
View Equipment Series →
Overflow Ball Mills
Overflow Ball Mill
MQY series. Check diameter, length, bearing arrangement and drive configuration before selecting liners, feed and discharge parts and drive spares.
View Equipment Series →Wet Grate-Discharge Ball Mills
Wet Grate Ball Mill
MQ wet grate-discharge series, covering grates, discharge systems, shell liners and drive parts.
View Equipment Series →Dry Grate-Discharge Ball Mills
Dry Grate Ball Mill
MQG dry grate-discharge series. Identify discharge, screening, liner and sealing arrangements by project configuration.
View Equipment Series →
Wet Rod Mills
Wet Rod Mill
MB series. Check shell dimensions, discharge type, liners, feed and discharge ends and drive system.
View Equipment Series →
PXZ Gyratory Crusher
PXZ Gyratory Crusher
Primary crushing equipment. Check feed and discharge openings, main shaft, spider, eccentric bushing, mantle and concave liners.
View Equipment Series →
Jaw Crushers
Jaw Crushers
Identify the crusher from the complete nameplate and feed opening, then review jaw plates, cheek plates, toggle plates, eccentric shaft and bearing housings.
View Equipment Series →
Cone Crushers
Cone Crushers
CCS / CC series, covering mantles, concaves, eccentric assemblies, bronze bushings, gears, seals and hydraulic parts.
View Equipment Series →
High Pressure Grinding Rolls
High Pressure Grinding Roll
GM series. Check roller diameter, width and configuration, then identify roller surfaces, studs, edge blocks, cheek plates and bearing systems.
View Equipment Series →
CSM Vertical Stirred Mills
CSM Vertical Stirred Mill
Vertical fine-grinding equipment, with agitators, liners, shell protection, shaft assemblies and seals.
View Equipment Series →
Semi-Mobile Crushing Stations
Semi-mobile Crushing Station
Identify the installed crusher, feeder and conveyor systems from the station's project configuration, then select the relevant wear parts and spares.
View Equipment Series →Model Identification
Equipment Series, Models and Identification Details
A shared model series does not establish parts interchangeability. Before manufacture or quotation, check the nameplate, full model, shell or feed dimensions, serial number, drawing number, revision and installation position.
| Equipment Series | Standard Models / Series | Key Identification Criteria |
|---|---|---|
| SAG Mill | SAG series; identify the complete specification by nameplate and shell dimensions | Confirm the full model and shell diameter × length; configurations vary by project |
| Autogenous Mills | AG Series | Check the full model, shell diameter × length, discharge and drive configuration |
| Overflow Ball Mills | MQY-09, 12, 15, 18, 21, 24, 27, 30, 32, 36, 40, 45, 50, 55, 60, 67, 73, 79, 88 | Begin with the model prefix and shell dimensions |
| Wet Grate-Discharge Ball Mills | MQ-09, 12, 15, 18, 21, 24, 27, 32, 36, 40, 45, 55 | Also check shell length, grate discharge and drive configuration |
| Dry Grate-Discharge Ball Mills | MQG Series | Check the nameplate, shell dimensions and dry discharge arrangement |
| Wet Rod Mills | MB-09, 12, 15, 21, 24, 27, 32, 36, 40, 45, 47 | Check shell dimensions, discharge type and bearing arrangement |
| PXZ Gyratory Crusher | PXZ30-55 to PXZ72-130; documented installations include PXZ54-75 and PXZ62-75 | Check feed opening and mantle bottom diameter against the full model specification; series identifiers are not manufacturing dimensions |
| Jaw Crushers | PE Series | Confirm the full model and feed opening from the nameplate or OEM drawing |
| Cone Crushers | CCS / CC Series | Check the full model, chamber and machine serial number together |
| High Pressure Grinding Rolls | GM series; documented models include GM140-60 and GM240-170 | Check roller diameter, width, surface type and bearing configuration |
| CSM Vertical Stirred Mills | CSM series; documented models include CSM-1120 | Check the full model, installed power, agitator and shell configuration |
| Semi-Mobile Crushing Stations | Project-Specific Equipment | Check the project name, crusher model, feeder and conveyor configuration |
Technical Requirements
From Machine Identification to Wear Parts and Spares
Send the full CITIC HIC model, nameplate, drawing or part number, installation position, current part photographs, drawings, material and operating conditions. ANRANST coordinates part identification, material assessment, Chinese manufacturing resources, quality control and finished part delivery.