Which standard FLS EB and EB Pro models are currently published?

FLS currently publishes EB 09-07, EB 11-08, EB 12-10, EB 14-11 Pro, EB 16-12 Pro and EB 20-15 Pro.

FLS eb و eb Pro الكسارة الفكية الطرازات وقطع التآكل والغيار| ANRANST

Official FLS EB cutaway, showing fixed and swing jaws, jaw plates, eccentric shaft, flywheel, toggle plate and tensioning mechanism.

Official FLS EB drive and lubrication side view, showing the flywheel, bearings, lubrication piping, motor and frame positions.

First page of the official FLS EB 20-15 Pro datasheet. The model table also includes five other EB and EB Pro sizes.

OEM المعدات التفاصيل

الطرازات وقطع التآكل وقطع الغيار والمواد في صفحة واحدة

EB and EB Pro are single-toggle jaw crushers. This page covers the standard models, dimensions, installation positions, material selection, drawing checks and enquiry information directly needed for spare identification.

6 Published standard models

7 Wear parts

9 Core spares

7 Official sources

Standard Models and Key Dimensions

EB 09-07 to EB 20-15 Pro

Capacity, feed opening, CSS, speed, drive power, equipment weight and overall dimensions come from the corresponding official FLS datasheets.

Model	Capacity	Feed opening A×B	CSS range	Recommended speed	Motor power	المعدات weight	Overall dimensions L×W×H
EB 09-07	104–288 t/h	700 × 900 mm	50–175 mm	200–230 rpm	90 kW (up to 110 kW)	Approximately 16,000 kg	Approximately 3,350 × 2,150 × 2,840 mm
EB 11-08	164–446 t/h	800 × 1,100 mm	70–225 mm	200–230 rpm	110 kW (up to 132 kW)	Approximately 28,000 kg	Approximately 4,350 × 2,700 × 2,900 mm
EB 12-10	207–523 t/h	1,000 × 1,200 mm	100–250 mm	180–200 rpm	132 kW (up to 160 kW)	Approximately 45,000 kg	Approximately 4,780 × 2,750 × 3,300 mm
EB 14-11 Pro	300–675 t/h	1,100 × 1,400 mm	100–250 mm	160–180 rpm	160 kW (up to 200 kW)	Approximately 55,000 kg	Approximately 4,100 × 3,180 × 3,430 mm
EB 16-12 Pro	400–1,200 t/h	1,200 × 1,600 mm	100–220 mm	145–160 rpm	200 kW (up to 250 kW)	Approximately 80,000 kg	Approximately 4,500 × 3,300 × 4,000 mm
EB 20-15 Pro	600–1,600 t/h	1,500 × 2,000 mm	130–230 mm	145–160 rpm	315 kW (up to 370 kW)	Approximately 130,000 kg	Approximately 5,260 × 4,070 × 4,720 mm

تعتمد السعة على الكثافة الظاهرية ومقاومة الانضغاط وتوزيع الأحجام والرطوبة وحجم المنتج المستهدف وإعداد الجانب المغلق (CSS) الفعلي. أكِّد قطع الغيار النهائية وفقًا للطراز الكامل والرقم التسلسلي ورقم الرسم ومراجعة الرسم وأبعاد التركيب.

قطع الغيار المستهلكة

Fixed jaws, swing jaws, cheek plates and body protection

Start with fixed and swing jaw plates, followed by upper/lower cheek plates, intermediate plates, feed guides and structural protection plates. Each item links to its part and material pages.

صفيحة فك ثابتة

Fixed Jaw Plate

Fixed jaw plates attach inside the front wall and form the chamber with the swing jaw plates. Check model, one-piece/segmented construction, tooth profile, top/bottom direction, thickness, hole pattern, clamping method, CSS and used-part wear profile.

Material and manufacturing checks:Use high-manganese steel or application-validated wear-resistant alloy steel. Confirm grade, heat treatment and hardness against ore impact, abrasion and original drawings.

FLS EB and EB Pro الكسارات الفكية

الطرازات وقطع التآكل وقطع الغيار والمواد في صفحة واحدة

صفيحة فك ثابتة

Swing Jaw Plates

ألواح الخد العلوية

ألواح الخد السفلية

ألواح وسيطة

ألواح توجيه التغذية

Swing Jaw and Front Wall Protection Plates

عمود لا مركزي

محامل أسطوانية ذاتية المحاذاة

ألواح دفع الكسارة الفكية (Toggle Plates)

مقاعد ألواح دفع الكسارة الفكية

Tension Rods

نوابض شد

CSS Adjustment Wedges

Jaw Plate Clamping Wedges

Labyrinth Dust الموانع

Which standard FLS EB and EB Pro models are publicly listed?

Is the equipment model alone enough to manufacture jaw plates?

Submit FLS EB models, drawing numbers, jaw plates or core spare requirements

من التقييم الفني إلى تسليم المنتج بالكامل

مراجعة الرسومات والهندسة

تحديد المادة والمعالجة الحرارية

ضبط الجودة

تسليم المنتج النهائي