Start with the brand, equipment series and installed machine, then explore wear parts, drive and structural spares, materials and processes, drawing review, quality control and finished-part delivery.
This page covers equipment series and models, part locations, materials and processes, drawing review and inquiry options. Before manufacture or quotation, confirm OEM drawing numbers, dimensions and tooling suitability against the complete model and drawings.
The model table assists with machine identification. Manufacture and quotation require the nameplate, complete model, serial number, drawing number, general arrangement and drawing revision.
| Series / Model | Equipment Range and Identification | Equipment History and Identification |
|---|---|---|
| Hydrocyclone | Use the complete model, serial number, drawing number and general arrangement together to identify the installed equipment | Identify the installed machine from its equipment records |
Explore hydrocyclone part types, candidate materials and technical inquiry requirements. Confirm applicability against the specific TAKRAF model and drawing.
Cylinder Liner / Upper Liner
Hydrocyclone wear part. Confirm installation position, profile, hole pattern, material and machine application against the equipment drawing. Candidate materials: polyurethane / rubber / high-chromium cast iron / ceramics. The image illustrates the general part type.
View General Part Details →
Cone Liner / Lower Liner
Hydrocyclone wear part. Confirm installation position, profile, hole pattern, material and machine application against the equipment drawing. Candidate materials: polyurethane / rubber / high-chromium cast iron / ceramics. The image illustrates the general part type.
View General Part Details →
Inlet Nozzle Liner
Hydrocyclone wear part. Confirm installation position, profile, hole pattern, material and machine application against the equipment drawing. Candidate materials: ceramics / polyurethane. The image illustrates the general part type.
View General Part Details →
Overflow Pipe Liner
Hydrocyclone wear part. Confirm installation position, profile, hole pattern, material and machine application against the equipment drawing. Candidate materials: polyurethane / rubber. The image illustrates the general part type.
View General Part Details →Identify gears, shafts, sleeves, bearings, seals, hydraulic parts, supports and connectors for drawing review. Listed OEM drawing or part references relate to identified parts and require confirmation against your machine.
Vortex Finder
Hydrocyclone spare part. Confirm interfaces, tolerances, material and machine application against the equipment drawing. Candidate materials: polyurethane / ceramics / high-chromium cast iron. The image illustrates the general part type.
View General Part Details →
Vortex Finder Insert
Hydrocyclone spare part. Confirm interfaces, tolerances, material and machine application against the equipment drawing. Candidate materials: ceramics / polyurethane. The image illustrates the general part type.
View General Part Details →
Apex / Spigot
Hydrocyclone spare part. Confirm interfaces, tolerances, material and machine application against the equipment drawing. Candidate materials: polyurethane / ceramics / high-chromium cast iron. The image illustrates the general part type.
View General Part Details →
Apex Insert
Hydrocyclone spare part. Confirm interfaces, tolerances, material and machine application against the equipment drawing. Candidate materials: ceramics / polyurethane. The image illustrates the general part type.
View General Part Details →
Inlet Head / Feed Chamber
Hydrocyclone spare part. Confirm interfaces, tolerances, material and machine application against the equipment drawing. Candidate materials: polyurethane / high-chromium cast iron. The image illustrates the general part type.
View General Part Details →
Cylinder Section Ring
Hydrocyclone spare part. Confirm interfaces, tolerances, material and machine application against the equipment drawing. Candidate materials: stainless steel / polyurethane. The image illustrates the general part type.
View General Part Details →Provide the complete model, serial number, drawing or part number, drawing revision, installation position, photographs of the current part, material and operating conditions.
No. General images help identify the part category. Manufacture requires agreed drawings, dimensions, interfaces, materials and acceptance criteria.
Start with the nameplate, general arrangement drawing, installation position, used-part photographs and key dimensions. We can then assess the feasibility of dimensional inspection, material evaluation and manufacture to drawing.
Provide the complete model, serial number, nameplate, installation position, photographs of the current part, drawings, material and operating conditions. We use these to identify the part, assess materials, organize production at certified foundries, coordinate quality control and arrange finished-part delivery.
Phone: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to drawing, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, confirmed in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing or part numbers, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry