Protection plates, pans & wear plates
Protection Plates, Feeder Pans and Structural Wear Plates
Container, absorb shocks and feedstream booting Equipment Construction
This type of plate is not just a "shell." The board feeder Apron panes form continuous bearing surfaces; the crushing machine protection panel protect rack, feather and feeding structure. VSI internal wear resistance panels control high-speed particle shaft: industrial foodboard or cane scrapping also assume stable material layer functions as well than lead function
Package and conveyor Apron Feeder apron pans / Slotboards and droplets impact plates
Construction Protection .Parse-breaking and jaw protection boards cone crusher Frames and racking board
High-speed wear VSI Rear wearables in the rotor and chamber
Identification requirements Equipment, Locations and Directions Interfaces, drawing number, materials and wear pattern
Category: Classification boundaries
Equipment identification OEM, complete model, serial number and Construction Revision
Installation identification Location, left/up and down oriented to the next side of a pairing Interfaces
Tables Geometry Contours, thicknesses and holes in the porch; perforated surfaces of a back bearing or wearable balance
Operating conditions Load, impact and abrasion; temperature & material flow rate
by Function and Mounting Relationships Identification) not categorized by the word "board"
Forming a crusher or Grinding surface mantle, concave, jaw dies and mill liners, which has been reintegrated Industrial Liners and Wear Linings; with bores and shoulder screening or discharge Function parts Entrance to screen panels, discharge grates and screen media.
This page retains the load, drop impact and structural protection of materials as well for conductors. Each item still needs to be tied up with equipment fitting position or part number because it is similar in appearance between different devices interchangeable
Apron Feeder
apron pans Touch-on loaders
apron pans It is a motor bearing system, and it needs to be connected with the chain. sprocket, the co-confirmation of rollers and skirt board.
apron pans / Give the feeder board
Multi-block plates are connected to the chain and aligned with each other for forming a bearing surface; matching width, side heights of alignment.
Dropping impact plates
The cloth is placed below the warehouse or concentrated in a dump area, dispersing large blocks of material impact; checks downside and bearing. Buffer layers are fixed as well with adjacent board plates
Crusher machine Construction Protection
Japs, cone crusher and VSI scooter
These plates are expensive to protect Construction Or stabilized feed streams, but not replace real broken Working surface.
Jaw stalk Upper Cheek Plates
Protection of the upper frame wall in crushing chamber; distinguish between right and top position, check jaw dies Contours, clamping parts and porosity with side walls Contact.
Jaw stalk Lower Cheek Plates
Protection of the end-side wall and handling fine materials Ongoing Abrasion; and Upper Cheek Plates, fixed/ Movable Jaw Plate and closed-side setting Compare.
squirrels of the body protection plate
Separate material and front jaw castings to avoid direct wear from expensive parent bodies; check the outline, bearing cording of holes jaw dies The backspace.
Jaw stalk Intermediate Plates
Used for specific Construction jaw dies.Co-operate with or protect the frame; Configuration, thickness and hole level must be stamped model and the drawings confirmed.
cone crusher frame-arm guard
Protection of armrests and adjacent Construction Avoiding sludge, stone and discharge; pair arms positioned to the edge of a frame with an arcade or right-hand side.
cone crusher Mainframes and pad
Below the crushing cavity Protects the main frame castings; aligning segments, direction of discharge and adjacent Arm Guard and Mounting The gap.
cone crusher Feedboards/feed cone
Distribution of feed to the crushing cavity and protection above a fractured head; reconciliation center Mounting, Turning direction and distribution of feeds Construction.
VSI Abrasion plate in the upper part
Protection of the upper rotor or chamber high-speed feed stream Contact Zones; Reconciling the rotor Type, up and down positioning rotational direction adjacent wear parts and the particulate trajectory.
Industrial feeds and guide
Cane sugar mill Feeding boards and sugarcane plate
Such plates Function In the feed layer control and pressurization of entrance, can not be replaced by a mine crusher carving plate.
Feeding Rollers for feed boards
Leading sugarcane or slag into the crushed roller line and stabilizing its layers; match rolling columns, plate curved surfaces with gapes in a row to fixation as well corrosion wear.
Sugar slag board/sucan cushion bar
Feeding and guiding materials between the roller lines; check-in mill Size, rollers center distance Working surface Curve, gap and wear-resistant layers.
Materials and Processes
load, impact and abrasion Construction Protection needs different materials Balance
Only in Equipment Locations and Failure records After the final digit and heat treatment.
failure and Identification
From bending, cracking and polished to loose refiners Construction
The plate abnormalities are usually associated with the stalk, connection and feed stream. Mounting Directions are relevant at the same time.
| Symptoms | Priority checks | Associated Risks |
|---|---|---|
| apron pans Bending or rupture | Drop-off impact, bearing rollers and plate thicknesses with rebar panels. materials Resistivity and overload | Packing failure, leakages and chain depreciation |
| Or bolts to loosen | scattering, and deep Contact Faces, pre-stressing and movable parts with adjacent connections | Protector plate detachment and mother body wear |
| Local smearing of the chipboard | / Up and down, jaw dies Tooth Profile Feeding is biased, closed-side setting and clamping | Direct wear on the side wall of a rack |
| Protector plate collapse or crack | peaks, materials Resilient, cross-sectional mutations and hollowing holes heat treatment | Fragment into downstream or damaged adjacent parts |
| VSI Abrasion plate polishing | Rotary balance, rotational flow and feed distributions; adjacent flapping heads with capsules/stone stones Condition | Transponder imbalance and abnormal vibration |
| The slab of the feed plate is unstable | Working surface Curve, gaps and roller positioning surface wearable material Condition | Reduced processing volume, load and product stability |
Inquiries and Quality Control
Tables Supply information
-dimensional external outlines can only serve as a starting point, and must be Mounting Delivery with the slate relationship.
Equipment and location
OEM, complete model, serial number, Mounting Area, left/up and down with the steering side.
drawing number and Geometry
part number, Drawing Revision, Contours and thicknesses; hole spacing: perforated surfaces.
Connections and stitches
Chain sections, bolts and welding connections; backboarding boardings. Buffer layers: bearing surfaces & assembly gap
Materials and Processes
Foundry/plates, chemical composition heat treatment mechanical properties, Hardness welded and surface protection.
Operating Conditions and Failure Modes
Load, sludge loss material and particle size abrasion temperature; refraction of the surface. service life.
Inspection With hulls
Material retrospective, sizeable NDT, Hardness Templates/Picture, Location Identification and fasteners.
Technology References: Metso considers plate feeder pans as heavy load and wearable, emphasizing the matching of original drawings / coupling or chain to a bearing system; its jaw crusherspart' data lists Cheek plates in frame side wall protection. Metso Apron Feeder Parts · Metso Jaw Crusher Parts
Related Equipment and Parts
General Equipment and OEM model Common use Individual Stud Details
Equipment Relationship Description Function, OEM Recognition of Relations complete model and drawing number, materials Relationship Description Manufacturing and Acceptance.
Apron Feeder apron pans, chaines and sprocket, the roller and skirting system. Jaw Crushers Cheekboards, braces protection and feed Construction Relationships. Industrial Liners Distinguish the protection board and directly involved in crushing / Grinding Working surface. OEM Brands & Models By brand, Series, complete model and part number Converging the dedicated plates.
Request Protection plates, feeder pans and structural wear plates quotation
Submission Equipment Models, installation position, drawing number Old size, materials and wear record, into Technical Review With the supply path.
Manufacturing Services in China
From Technical Assessment to Finished-Part Delivery
Technical advice, supplier introductions, quality control and finished-part delivery.
Technical Advice
Verification of plate Function, Mounting, and the bonding materials and failure.
Supplier Introductions
Matching casting, wear-resistant plate processing and stacking Manufacturing Resources.
Quality Control
Tracking the drawings, materials, heat treatment, pore positioning and welding equipment.
Finished-Part Delivery
Location, direction and logo fasteners and the order of replacement Complete Sets.