Start with the current SK, SM and S ranges to find screen panels, mesh, liners, deck frames, support springs, tensioning parts, materials and quotation options.
The current public range is organized into SK, SM and S and their screen types. This page does not invent standard dimensions: screen type, screening surface, deck count, drive and part position form the basis for technical checks.
Sandvik publishes screen types rather than a single standard-size model system. This table retains official ranges and public screen types; check length, width, deck count, aperture, drive and exciter against installed-equipment documents.
| Product range | Screen type | Key identification details | Dimension basis |
|---|---|---|---|
| SK Range | SL Flat deck | Flat-deck screen; confirm wet/dry duty, deck count and screening configuration | Customized |
| SK Range | SM Multislope | Multislope screen for high-throughput classification | Customized |
| SK Range | SA Flat deck | Flat-deck screen; confirm screening surface and drive configuration | Customized |
| SK Range | SG Grizzly | Heavy-duty grizzly for prescreening and fines removal | Customized |
| SK Range | SN Multislope | Single- or double-deck multislope screen with vibrating motors | Customized |
| SK Range | SV Dewatering | Dewatering screen; confirm screening surface, open area and drainage requirements | Customized |
| SM Range | SM Multislope | Single- or double-deck multislope screen with DF exciters | Customized |
| SM Range | SL Linear flat | Single- or double-deck linear flat screen with DF exciters | Customized |
| SM Range | SG Linear grizzly | Heavy-duty linear grizzly for prescreening crusher feed | Customized |
| SM Range | SA Flat | Single- or double-deck linear flat screen with vibrating motors | Customized |
| S Range | SA Inclined | Inclined screen | Customized |
| S Range | SJ Inclined | Inclined screen | Customized |
| S Range | SL Horizontal | Horizontal screen | Customized |
| S Range | SS / SF Free-fall | Free-fall screen | Customized |
| S Range | SR Roller | Roller screen | Customized |
| S Range | SG Grizzly | Grizzly screen | Customized |
The same screen-type name may occur in different product ranges. SA, SG, SL or SM alone is insufficient: confirm the SK/SM/S range, complete nameplate and screen drawings together.
Check panels and mesh by aperture, module size, fastening, flow direction and screening duty. Identify liners separately in feed, sidewall, discharge and bearing areas.
لوح غربلة من البولي يوريثان
Installed on the deck for classification or dewatering through the apertures. Check aperture shape and size, panel thickness, module dimensions, fastening, flow direction, open area and screening duty.
Material selection: Confirm polyurethane hardness, elasticity, hydrolysis resistance, tear resistance and insert structure against abrasion, impact, temperature and wet-screening or dewatering conditions.
View the common part page →
Screen Mesh / Wire Mesh
For dry or wet classification. Check aperture, wire diameter, weave, width, length, tension direction, edge form and deck count.
Material selection: Confirm spring steel, stainless steel or wear-resistant alloy wire against abrasion, corrosion, temperature, amplitude and target open area.
View the common part page →
بطانة صندوق التغذية
Protect the feed area and cushion concentrated material flow. Check position, plate sequence, holes, thickness, overlaps and feed direction.
Material selection: Confirm rubber, polyurethane, quenched-and-tempered wear plate or composites against drop height, impact, abrasion and noise requirements.
View the common part page →
Side Plate Liner
Protect screen-box sidewalls in contact with the material bed. Check left/right side, front/rear position, plate numbers, holes, thickness and overlap with the deck.
Material selection: Confirm rubber, polyurethane or quenched-and-tempered wear plate against scouring, abrasion, noise, weight and connection method.
View the common part page →
بطانة قناة التفريغ
Protect oversize or undersize discharge chutes. Check the outlet served, flow direction, plate sequence, holes, thickness and overlaps.
Material selection: Confirm rubber, polyurethane, quenched-and-tempered wear plate or composites against impact, sliding wear, blockage and noise requirements.
View the common part page →
غلاف المحمل Protection Liner
Protect exposed structures near bearing housings from falling and flowing material. Check housing position, plate profile, holes, thickness and maintenance clearance.
Material selection: Confirm quenched-and-tempered wear plate, rubber or polyurethane against falling-material impact, dust, temperature rise and removability requirements.
View the common part page →
Capping Rubber
Fitted between mesh and support or clamping points to cushion vibration and protect mesh edges. Check section, length, groove width, orientation and matching rails.
Material selection: Confirm wear-resistant elastic rubber against hardness, rebound, ageing resistance, temperature, oil contamination and clamping pressure.
View the common part page →Confirm structural and support parts by screen type, deck count, deck dimensions, amplitude, frequency, load, orientation and installation datums.
Deck Frame
Carry the screening surface and material bed. Check screen type, deck count, length, width, cross-member layout, connecting holes, crown height, tensioning method and installation datums.
Material selection: Confirm structural steel, wear-resistant contact parts and high-strength fasteners separately against vibration fatigue, loads, corrosion and welding requirements.
View the common part page →
Modular Panel Frame
Support modular panels while maintaining module spacing and deck flatness. Check module dimensions, grid layout, fastening interfaces, deck count and structural datums.
Material selection: Confirm structural steel, wear-resistant covering or elastic inserts against vibration fatigue, corrosion, wear and panel fastening.
View the common part page →
Support Spring / Buffer
Support the screen box and isolate dynamic loads. Check outside and wire diameters, free height, stiffness, quantity, position and matched set height.
Material selection: Confirm spring steel or elastomer buffers against load, amplitude, frequency, fatigue, temperature and set-matching requirements.
View the common part page →
قضيب شد / إسفين
Secure tensioned mesh and maintain deck preload. Check screening direction, rail section, wedge angle, length, holes and left/right arrangement.
Material selection: Confirm quenched-and-tempered alloy steel, structural steel or elastic contact parts against preload, impact, wear and repeated assembly requirements.
View the common part page →Traceable records do not yet provide a public parts list mapped to specific installed SK, SM and S screens. No inferred numbers are published here; known OEM or third-party drawing numbers can be submitted for checking.
Application rule: Before manufacture, confirm range, screen type, nameplate, deck dimensions and count, part position, orientation, drawing number or drawing, material and operating conditions together.
No. The same type designation can occur in different ranges. Provide the SK/SM/S range, complete nameplate, deck dimensions and count, and equipment documents.
No. Also check module dimensions, thickness, aperture shape, fastening, flow direction, deck layout, material and wet or dry screening conditions.
Yes. Submit the nameplate, installation position, used-part photos, key dimensions or drawings so we can identify the part first.
Provide the complete nameplate, SK/SM/S range, screen type, deck dimensions and count, part position, OEM or third-party numbers, photos, drawings, material and conditions for identification and supply.
رقم الهاتف: +86 156 3797 3199
zzx@anranst.com
توفر شركة ANRANST للعملاء العالميين تقييمات هندسية، واختيار التصنيع الصيني، ومراقبة الجودة، وتسليم الأجزاء النهائية لقطع الغيار الصناعية المقاومة للتآكل حسب الطلب، ويمكنها أيضًا دعم قطع الغيار الصناعية الأخرى حسب الطلب.
قم بمراجعة أسطح التزاوج وأبعاد الواجهة، وقم بتقييم جدوى المواد والمعالجة الحرارية والتصنيع.
تُحدَّد درجات المواد وعمليات المعالجة الحرارية لكل طلب على حدة، وتُثبَّت في الاتفاقية الفنية وتُتابَع أثناء الإنتاج.
يشمل ذلك تأكيد الرسم، ومراقبة المواد والعمليات، وتتبع الإنتاج، وتنسيق عمليات الفحص والقبول.
تنظيم عمليات التصنيع والتحقق من الجودة والتعبئة والتغليف وتسليم المنتجات النهائية الكاملة لتشكيل حلقة إمداد قابلة للتنفيذ.
قم بتزويدنا بالنماذج الحالية، والرسومات، وأرقام الرسومات، وأرقام الأجزاء، والمواد، أو معلومات ظروف التشغيل، وسنقوم بتحديد التحقق الفني ومسار التوريد وفقًا لذلك.
إرسال طلب