EQUIPMENT-SPECIFIC SPARES
Equipment-specific Spares and Auxiliary Assemblies
Hydraulic adjustment, tight-fittings and conveyor flowing lines Construction
Such parts should not be generally purchased according to "other parts" which are directly related with the installation interface, motion relationship and loads of specific equipment. They need back into device model / configuration position or drawings for confirmation
Category: Classification boundaries
Function Reconciliation, fittings and transmission of the flow-in or overloading
Interfaces Mounting Confucius, Reference Material axis diameter, flange and circuits
Load load static load, shocks and vibrational effects of torque (tremor), tensioning pressure or pulp erosion
Evidence complete model, assembly drawing, parts Figures, nameplate, physical and operating conditions
Only retaining dependence on specific Equipment Interfaces Specialized Parts
The liner, Gear and bearings are sealed with their own materials on the product page; this pages carry special parts such as hydraulic adjustment (hydration), tight holding of material transporting process flowways or structural protection.
Reconciliation and Overload Protection
hydraulics, Tension Rods, clamping and lift Part / Assembly
Confirm First Function, and the trip Mounting Borders, re-checking materials, sealing and connection conditions.
Impact Crusher
Apron Adjustment Cylinder
Reconciliation of the counter-helicopter gap; Part Construction The cylinder diameter, rod radius and strokes must be checked against the head shaft pressure or seal.
Impact Crusher
Apron adjustment rod
Transfers and maintenance load. thread, endpoint connections; effective length of the payload materials heat treatment All need to be installed Construction Confirmation.
Cone Crushers
cylinders in total
Relatively or related to the adjustment ring Construction.The clamping force shall be applied at the same time as to check for a tank, Mounting The road, the corridor Interfaces, sealing and working pressure.
Rotary Roller Crusher
Fluid Couplings
Transfer torques and provide boot or overload buffering in the drive chain. Speed, shaft end and filler fluids as well.
Spiral Classifier
Spiral Lifting Mechanism
Upgrade and down spiral shafts Equipment Deactivated or operating location. Requires the trip, hooking point and wire rod/hydraulic Construction Limits and load.
Jaw Crushers
Tension Rods Off-the way back with the preset
Continuation toggle plate institutions Contact and the back-toe is tight. The valid length, threads or spring must be checked Hydraulic Attachments and the Connected End Construction.
Transport and fittings
the storm, Elevator Belt, Wheels and Sewerage Construction
materials Not only depends on wear, but also depending upon tensions and junction loaders. Construction stiffness.
Bucket Elevator
Bucket / Elevator Cup
Direct loading and unloading of materials.Determined by capacity, spacing ratios / pores or transmission material (speed), temperature & impact) Construction and materials.
Bucket Elevator
Elevator Belt
Pack the load, material loading and cycle tension. The bandwidth of a bucket is required to be matched by number or wire rope cores for steel threading; connector with pinhole position as well ASTR & temperature
Bucket Elevator
Head Pulley / Boot Pulley
Drive or redirect Elevator Belt. Requires the diameter, width of face and surface to be matched with a rubber or coating hole; Axle holes: keystroke connector bearing and speeding.
Vibrating Screen
Screen Deck Frame
The sieve and the vibration load is transmitted. It requires a check of beam position, pore lengthing point to be checked for pre-archament; fixation in screen mode as well fatigue welding seams & corrosion protection
Reload Points and Spot
Skirt Board
Control the surface boundary and dust spills. Select belt, gaping area / material particle size or clamp mode as well for wearable areas Construction and materials.
Impact Crusher
Impact Apron Assembly
Repelling the bolt Liners and forming a fractured gap. Consolidation of the parent at once Construction, Liners, pins, adjustment and overload movement relationship.
Streaming and Process Interfaces
Pulp-conductor, grading and axle protection parts
Transit parts need to be Geometry, particles and concentrations; pressures or speedes of corrosion as well.
Hydrocyclone
Feed Head / Feed Chamber
Importing the mineral slurry into a whirlpool. Shape Flange, pressures and flowing particles materials Converging.
Hydrocyclone
Vortex Finder
Control overflow channels and inhibit short circuit flow. Inner diameter, insertion depths / wall thicknesses or coaxiality of the substrate affect grade operating conditions.
Hydrocyclone
Underflow Spigot / Apex
Forming the bottom flow exit, which requires averbation and shape check-in Mounting, elastomers or ceramic Construction And the bottom-edge of field Condition.
Slurry Pump
Pumps Shaft Sleeve
The axle is protected and forms the sealing operation surface. Axial diameter must be tangled, sealed Construction, Surface Hardness and roughness, corrosion & wear.
Flotation Machine
Flotation Machine Shaft Sleeve
isolation Main Shaft With slurry or sealing Contact The area needs to be Main Shaft, impeller Converged the static system, sealing position and corrosion wear conditions.
Cone Crushers
Main Frame Arm Guards
Protection of the armatures from fallout and scratches shall be determined in terms to cover area, fixed manner or plate thickness as well.
Material and Manufacturing Requirements
First press Function and failure Subgroups, and again Material Selection Supplies and Processes
This page is not single Material Family Each part must be returned to the specific Equipment and job location selection of candidate.
Materials: Wear-Resistant Materials and Manufacturing Processes For the purpose of describing material family, operating conditions and failure relationships. Chemical compositions / graders or hardness rates for heat treatment are determined only after equipment is clearly defined in terms to drawings & technical specifications
Failure Diagnosis
Anomalies usually come from systemic relationships, not individual ones. parts
Removal of damaged parts, accessories and loads Action Recording together to avoid copyting the original failure.
| Observed condition | Priority checks | Manufacturing and inspection OBSERVATIONS |
|---|---|---|
| Tank leaks, creeping or inadequacies | Pressure, pollution and cylinders with rod surfaces Guiding, sealing and coaxial bearings | Size, roundness and roughity; coating or Surface treatment, sealing batches and pressure tests |
| Tension Rods, Stent or Weld Fatigue | Pre-tight, shocks and biases; stress concentration. Mounting Deformed | Materials and heat treatment, Transitional Round Corner and welding process NDT and Dimensions Reference Material |
| Elevator Belt Run slop or borehole torn | Wheels, tight and wheel surface; boiling distance: connector & overload | Belts Construction, hole processing and joints with the attachment of a screwhole thicknesses |
| Locally fast grinding of transflow parts | Flows, inlet flowing and particle size; concentration of the air pollution Mounting Steps and materials Continuity | Shapes, wall thicknesses and layering combination materials Pieces, Hardness Or elasticity and size detection |
| Totally impossible Mounting Or movement is hindered | model, Revision, Interfaces, Reference Material, Travels and adjacent parts as well on-site renovation records | Scales, Testing and Exercise Inspection - Marking & Assembly File |
RFQ and Quality Control
Equipment Specialized Assists spare parts Supply information
Only the name is not enough to lock. parts The more complete the information, and clearer are alternative boundaries.
Equipment identification
OEM, Equipment Category, complete model, serial number, Manufacturing Year, Remodeling and Current Configuration.
parts Identity
General name, installation position, OEM drawing number, part number old logos and Quantity.
Interfaces and Movements
Mounting Reference Material, pore shaft flange threads and pipeline lines; itinerary flow rate. direction limit & adjacent parts
Loading and operating conditions
Pressure, tensions and torque shocking vibrational pressure / oscillation temperature; material or pulp body corrosiveness.
Materials and failures
Current Material, heat treatment Or the slate, service life Abrasion measurement, cracking and deformations; leakage of photos.
Acceptance With hulls
Sizes, materials Performance, non-destructiveness and pressure or action testing. spare parts Packages, logons and traceability.
Technology References: Metso distinguishes the mineral equipment spare parts as standard, on-demand engineering and device specific parts with emphasis to explore manufacturing & materials solutions based upon their operating conditions; its open scope includes crushing systems such that grinding mines are broken down or smelted from a single surface pump. Metso Parts for Mining Equipment
Related Equipment and Parts
From General Function Returns to entrance Equipment and OEM model
Universal page interpretation materials and Function, Equipment Page Confirmation installation position, OEM Pages further check-in model, total and drawing number.
General Equipment Catalogue By crushing, grinding mine and conveyors gradation or selection Equipment Entering.
OEM Brands & Models By brand, Series, complete model and History Configuration Converging.
Spare Parts Catalogue Entrance Liners, gear, bearing, sealing and pins Other clear classifications.
Materials and Manufacturing Processes by operating conditions, failure and Manufacturing Border sieve Material Selection The squirrels.
Request Equipment Specialized spare parts Converging and quotation
Submission Equipment Models, in total location. drawing number or part number, Interfaces Sizes, operating conditions, photos of used parts and Failure information.
Manufacturing Services in China
From Technical Assessment to Finished-Part Delivery
Technical advice, supplier introductions, quality control and finished-part delivery.
Technical Advice
Converged Equipment, Function, Interfaces, materials, operating conditions and failure.
Supplier Introductions
Matching resources by casting, welding and fittings.
Quality Control
Tracking materials Process, size and lossless pressure or action testing.
Finished-Part Delivery
Organization of single parts, aggregates and sealing attachment. Mounting Pieces and Technology Documentation Complete Sets.