Rotary kiln · 2026 · 3 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| 1218 / ПВ 2,5×40 Rotary kiln | 1218; ПВ 2,5×40 | 2026 | 7 |
| СМ 875А / СМ 875Б Rotary kiln | СМ 875А; СМ 875Б | 2026 | 7 |
| СМС 199 / ПВП 2,8×20 Rotary kiln | СМС 199; ПВП 2,8×20 | 2026 | 7 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Kiln shell | Variable-section rotary-kiln drum | СМ 875Б |
| 2 | Tyre | Two support rings around the drum | СМ 875Б |
| 3 | Ring gear | Drive ring to the right of the left tyre | СМ 875Б |
| 4 | Drive assembly | Drive below the left support region | СМ 875Б |
| 5 | Support roller | Supports beneath the tyres | СМ 875Б |
| 6 | Thrust roller | СМ 875Б | |
| 7 | Feed chute | Inclined feed passage above the left end | СМ 875Б |
| 8 | End seal | Labyrinth seal at the left end | СМ 875Б |
| 9 | Gas burner | Burner entering the hood on the right | СМ 875Б |
| 10 | Oil burner | СМ 875Б | |
| 11 | Drum discharger | Discharge unit below the cooler | СМ 875Б |
| 12 | Bed cooler | СМ1250 cooler beneath the kiln hood | СМ 875Б |
| 13 | Conveyor belt | Inclined conveyor beneath the cooler | СМ 875Б |
| Component |
|---|
| Feed and discharge heads |
Models with the same components are grouped together; select a group to open its component table.
Models: 1218 / ПВ 2,5×40 Rotary kiln, СМ 875А / СМ 875Б Rotary kiln, СМС 199 / ПВП 2,8×20 Rotary kiln
| No. | Component |
|---|---|
| 1 | Kiln Shell |
| 2 | Tyre |
| 3 | Ring gear |
| 5 | Model-specific component |
| 6 | Model-specific component |
| 8 | End seal |
| Model-specific component |
The Rotary kiln СМ 875А / СМ 875Б etc. covers 3 models: 1218 / ПВ 2,5×40 Rotary kiln, СМ 875А / СМ 875Б Rotary kiln, СМС 199 / ПВП 2,8×20 Rotary kiln. Former and renamed designations are listed in the models table on this page.
The Rotary kiln СМ 875А / СМ 875Б etc. is also documented under these designations: 1218 / ПВ 2,5×40 Rotary kiln, 1218, ПВ 2,5×40, СМ 875А / СМ 875Б Rotary kiln, СМ 875А, СМ 875Б, СМС 199 / ПВП 2,8×20 Rotary kiln, СМС 199, ПВП 2,8×20.
The Rotary kiln СМ 875А / СМ 875Б etc. is listed under the Strommashina brand as: Rotary kiln. Period: 2026. Status: Historical model.
7 components are recorded, including: Kiln Shell, Tyre, End seal, Ring gear and more. The full list with locations is in the components table on this page.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry