Rotary kiln · 2026 · 5 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| 2,2×14 m Rotary kiln | 2,2×14 | 2026 | 5 |
| 2,5×75 m Rotary kiln | 2,5×75 | 2026 | 8 |
| 3×60 m historical Rotary kiln | 3×60 | 2013 | 6 |
| 3,6×110 m historical Rotary kiln | 3,6×110 | 2013 | 6 |
| ПВМ 4,0×150 m Rotary kiln | ПВМ 4,0×150 | 2013 | 6 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Kiln shell | Outer wall of the rotary-kiln drum | Dimensions/model not specified (OEM long rotary kiln view) |
| 2 | Tyre | Second support ring around the drum | Dimensions/model not specified (OEM long rotary kiln view) |
| 3 | Support roller | Beneath the second tyre | Dimensions/model not specified (OEM long rotary kiln view) |
| 4 | Ring gear | Drive position near the middle of the kiln | Dimensions/model not specified (OEM long rotary kiln view) |
| 5 | Feed and discharge hoods | Stationary discharge hood on the left | Dimensions/model not specified (OEM long rotary kiln view) |
| Component |
|---|
| Thrust rollers |
| End seals |
| Kiln chains |
| Heat exchanger |
| Planetary cooler tube |
Models with the same components are grouped together; select a group to open its component table.
Models: 3×60 m historical Rotary kiln, 3,6×110 m historical Rotary kiln, ПВМ 4,0×150 m Rotary kiln
| No. | Component |
|---|---|
| 1 | Kiln Shell |
| 2 | Tyre |
| 3 | Model-specific component |
| 4 | Ring gear |
| Model-specific component | |
| End seal |
| No. | Component | Location |
|---|---|---|
| 1 | Kiln Shell | |
| 2 | Tyre | |
| 3 | Model-specific component | |
| Model-specific component | ||
| End seal | ||
| Model-specific component | ||
| Heat exchanger | ||
| Satellite cooler tube | Periphery of the rotary kiln discharge end |
| No. | Component |
|---|---|
| 1 | Kiln Shell |
| 2 | Tyre |
| 3 | Model-specific component |
| Model-specific component | |
| End seal |
The Rotary kiln 2,2×14 m etc. covers 5 models: 2,2×14 m Rotary kiln, 2,5×75 m Rotary kiln, 3×60 m historical Rotary kiln, 3,6×110 m historical Rotary kiln, ПВМ 4,0×150 m Rotary kiln. Former and renamed designations are listed in the models table on this page.
The Rotary kiln 2,2×14 m etc. is also documented under these designations: 2,2×14 m Rotary kiln, 2,2×14, 2,5×75 m Rotary kiln, 2,5×75, 3×60 m historical Rotary kiln, 3×60, 3,6×110 m historical Rotary kiln, 3,6×110, ПВМ 4,0×150 m Rotary kiln, ПВМ 4,0×150.
The Rotary kiln 2,2×14 m etc. is listed under the Strommashina brand as: Rotary kiln. Period: 2026. Status: Historical model.
9 components are recorded, including: Kiln Shell, Tyre, End seal, Heat exchanger, Ring gear, Satellite cooler tube and more. The full list with locations is in the components table on this page.
Model-specific components with their own page: Satellite cooler tube (1 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry