Ball mill · 2026 · 11 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| 1870 / МШР 1800×7000 Ball mill | 1870; МШР 1800×7000 | 2026 | 11 |
| МШ-2 Ball mill | МШ2; МШ-2; 1350×1500 | 2026 | 6 |
| МШР 2100×2200 Ball mill | МШР 2100×2200 | 2026 | 3 |
| МШЦ large type central discharge Ball mill | МШЦ 2100×2200; МШЦ 2700×3600; МШЦ 3200×3100; МШЦ 3200×4500; МШЦ 3600×5500; МШЦ 4500×5500; МШЦ 4500×6000 | 2013 | 2 |
| МШЦ 2100×3000 Ball mill | МШЦ 2100×3000 | 2026 | 2 |
| СМ6001А / МШЦ 1500×3000 Ball mill | СМ6001А; МШЦ 1500×3000 | 2026 | 8 |
| СМ6003А / МШР 1500×1600 wet Ball mill | СМ6003А; МШР 1500×1600 | 2013 | 3 |
| СМ6004А / МШР 1500×1600 Ball mill | СМ6004А; МШР 1500×1600 | 2026 | 11 |
| СМ6007А / МШЦ 900×1800 Ball mill | СМ6007А; МШЦ 900×1800 | 2026 | 7 |
| СМ6008А Ball mill | СМ6008А; 900×1900 | 2026 | 10 |
| Т7 / МШЦ 2500×3500 Ball mill | Т7; МШЦ 2500×3500 | 2013 | 7 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Mill shell | Grinding chamber shell | МШР 2100×2200 |
| 2 | Mill liner | Inner wall of the cutaway drum | МШР 2100×2200 |
| 3 | Mill end cover | Left end of the grinding drum | МШР 2100×2200 |
| 4 | Feed trunnion | Feed trunnion on the left | МШР 2100×2200 |
| 5 | Bearing | Support beneath the feed trunnion | МШР 2100×2200 |
| Component |
|---|
| Support rollers |
| Feed screw |
| Discharge bushing |
| Grinding balls |
| Drive gear |
| Loading hatch |
| Filter plate |
| Spiral scoop |
| Gear-type coupling |
| Discharge grate |
| Discharge lifters |
| Discharge cone body |
| Discharge screen |
Models with the same components are grouped together; select a group to open its component table.
Models: 1870 / МШР 1800×7000 Ball mill, СМ6004А / МШР 1500×1600 Ball mill
| No. | Component |
|---|---|
| 1 | Mill Shell |
| 2 | Mill liner |
| 3 | Mill End cover |
| Model-specific component | |
| Feed screw | |
| Discharge bushing | |
| Model-specific component | |
| Model-specific component | |
| Model-specific component | |
| Discharge cone body | |
| Drive gear |
Models: МШР 2100×2200 Ball mill, СМ6003А / МШР 1500×1600 wet Ball mill
| No. | Component |
|---|---|
| 1 | Mill Shell |
| Model-specific component | |
| Model-specific component |
Models: МШЦ large type central discharge Ball mill, МШЦ 2100×3000 Ball mill
| No. | Component |
|---|---|
| 1 | Mill Shell |
| Model-specific component |
| No. | Component |
|---|---|
| 1 | Mill Shell |
| 2 | Mill liner |
| 3 | Mill End cover |
| Model-specific component | |
| Feed screw | |
| Discharge bushing | |
| Model-specific component | |
| Model-specific component | |
| Model-specific component | |
| Discharge cone body |
| No. | Component |
|---|---|
| 1 | Mill Shell |
| 2 | Mill liner |
| 3 | Mill End cover |
| Model-specific component | |
| Feed screw | |
| Discharge bushing | |
| Model-specific component | |
| Drive gear |
| No. | Component |
|---|---|
| 1 | Mill Shell |
| 2 | Mill liner |
| 3 | Mill End cover |
| Model-specific component | |
| Feed screw | |
| Discharge bushing | |
| Model-specific component |
| No. | Component |
|---|---|
| 1 | Mill Shell |
| 2 | Mill liner |
| Model-specific component | |
| Feed screw | |
| Discharge bushing | |
| Model-specific component | |
| Discharge screen |
| No. | Component |
|---|---|
| 1 | Mill Shell |
| 5 | Bearing |
| Model-specific component | |
| Filter plate | |
| Model-specific component | |
| Gear-type coupling |
The Ball mill covers 11 models: 1870 / МШР 1800×7000 Ball mill, МШ-2 Ball mill, МШР 2100×2200 Ball mill, МШЦ large type central discharge Ball mill, МШЦ 2100×3000 Ball mill, СМ6001А / МШЦ 1500×3000 Ball mill, СМ6003А / МШР 1500×1600 wet Ball mill, СМ6004А / МШР 1500×1600 Ball mill, СМ6007А / МШЦ 900×1800 Ball mill, СМ6008А Ball mill, Т7 / МШЦ 2500×3500 Ball mill. Former and renamed designations are listed in the models table on this page.
The Ball mill is also documented under these designations: 1870 / МШР 1800×7000 Ball mill, 1870, МШР 1800×7000, МШ-2 Ball mill, МШ2, 1350×1500, МШР 2100×2200 Ball mill, МШР 2100×2200, МШЦ large type central discharge Ball mill, МШЦ 2100×2200, МШЦ 2700×3600, МШЦ 3200×3100, МШЦ 3200×4500, МШЦ 3600×5500.
The Ball mill is listed under the Strommashina brand as: Ball mill. Period: 2026. Status: Historical model.
17 components are recorded, including: Mill Shell, Mill liner, Mill End cover, Feed screw, Discharge bushing, Discharge cone body, Drive gear, Filter plate and more. The full list with locations is in the components table on this page.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry