Rotary kiln СМ 875А / СМ 875Б etc.

Rotary kiln · 2026 · 3 models

Strommashina Rotary kiln СМ 875А / СМ 875Б etc. – Rotary kiln
Strommashina Rotary kiln СМ 875А / СМ 875Б etc. – Rotary kiln (2)
Pictured model: СМ 875Б
Strommashina
StrommashinaBrand
Rotary kilnEquipment type
2026Period
Historical modelStatus
Strommashina

Models and Historical Names in This Series

Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.

ModelHistorical names / renamingsPeriodComponents
1218 / ПВ 2,5×40 Rotary kiln1218; ПВ 2,5×4020267
СМ 875А / СМ 875Б Rotary kilnСМ 875А; СМ 875Б20267
СМС 199 / ПВП 2,8×20 Rotary kilnСМС 199; ПВП 2,8×2020267
Strommashina

Numbered Components

The numbers on the diagram correspond one to one with the rows below.

No.ComponentLocationApplies to
1Kiln shellVariable-section rotary-kiln drumСМ 875Б
2TyreTwo support rings around the drumСМ 875Б
3Ring gearDrive ring to the right of the left tyreСМ 875Б
4Drive assemblyDrive below the left support regionСМ 875Б
5Support rollerSupports beneath the tyresСМ 875Б
6Thrust rollerСМ 875Б
7Feed chuteInclined feed passage above the left endСМ 875Б
8End sealLabyrinth seal at the left endСМ 875Б
9Gas burnerBurner entering the hood on the rightСМ 875Б
10Oil burnerСМ 875Б
11Drum dischargerDischarge unit below the coolerСМ 875Б
12Bed coolerСМ1250 cooler beneath the kiln hoodСМ 875Б
13Conveyor beltInclined conveyor beneath the coolerСМ 875Б
Other Components · 1 item
Component
Feed and discharge heads
Strommashina

Components by Model

Models with the same components are grouped together; select a group to open its component table.

1218 / ПВ 2,5×40 Rotary kiln, СМ 875А / СМ 875Б Rotary kiln, СМС 199 / ПВП 2,8×20 Rotary kiln7 items

Models: 1218 / ПВ 2,5×40 Rotary kiln, СМ 875А / СМ 875Б Rotary kiln, СМС 199 / ПВП 2,8×20 Rotary kiln

No.Component
1Kiln Shell
2Tyre
3Ring gear
5Model-specific component
6Model-specific component
8End seal
Model-specific component

Frequently asked questions

Which models does the Rotary kiln СМ 875А / СМ 875Б etc. cover?

The Rotary kiln СМ 875А / СМ 875Б etc. covers 3 models: 1218 / ПВ 2,5×40 Rotary kiln, СМ 875А / СМ 875Б Rotary kiln, СМС 199 / ПВП 2,8×20 Rotary kiln. Former and renamed designations are listed in the models table on this page.

What other names or designations is the Rotary kiln СМ 875А / СМ 875Б etc. known by?

The Rotary kiln СМ 875А / СМ 875Б etc. is also documented under these designations: 1218 / ПВ 2,5×40 Rotary kiln, 1218, ПВ 2,5×40, СМ 875А / СМ 875Б Rotary kiln, СМ 875А, СМ 875Б, СМС 199 / ПВП 2,8×20 Rotary kiln, СМС 199, ПВП 2,8×20.

Which brand and type of equipment is the Rotary kiln СМ 875А / СМ 875Б etc.?

The Rotary kiln СМ 875А / СМ 875Б etc. is listed under the Strommashina brand as: Rotary kiln. Period: 2026. Status: Historical model.

Which components and wear parts are recorded for the Rotary kiln СМ 875А / СМ 875Б etc.?

7 components are recorded, including: Kiln Shell, Tyre, End seal, Ring gear and more. The full list with locations is in the components table on this page.

How do I enquire about parts for the Rotary kiln СМ 875А / СМ 875Б etc.?

Envoyez-nous un plan ou un échantillon et indiquez le modèle d'équipement et le nom de la pièce.

Envoyez-nous un plan ou un échantillon et indiquez le modèle d'équipement et le nom de la pièce

Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.

Demander un devis

Ou contactez-nous directement : +86 156 3797 3199
zzx@anranst.com

Manufacturing Services in China

From Technical Assessment to Finished-Part Delivery

ANRANST provides customers worldwide with engineering assessment, production at certified foundries to drawing, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.

Veuillez fournir la marque de l’équipement, le modèle complet et le numéro de série, le nom de la pièce, sa référence ou le numéro du plan, l’indice de révision du plan, la quantité, les exigences relatives au matériau et les conditions de service. Si ces identifiants ne sont pas disponibles, envoyez des photographies et les dimensions principales.

Submit an Enquiry