Start with the brand, equipment series and installed machine, then explore wear parts, drive and structural spares, materials and processes, drawing review, quality control and finished-part delivery.
This page covers equipment series and models, part locations, materials and processes, drawing review and inquiry options. Before manufacture or quotation, confirm OEM drawing numbers, dimensions and tooling suitability against the complete model and drawings.
The model table assists with machine identification. Manufacture and quotation require the nameplate, complete model, serial number, drawing number, general arrangement and drawing revision.
| Series / Model | Equipment Range and Identification | Equipment History and Identification |
|---|---|---|
| D4 Type | Overall width 2,160 mm × height 1,200 mm; effective width 1,500 mm; smaller feeder configuration | Feeder model; dimensions vary with configuration |
| D7 Type | Overall width 2,775 mm × height 1,480 mm; effective width 2,000 mm; medium feeder configuration | Feeder model; dimensions vary with configuration |
| D9 Type | Bulldozer-fed configuration, also used in mobile installations | Feeder model; dimensions vary with configuration |
| D10 Type | Large apron feeder; confirm overall width, height and effective width against the installed equipment's general arrangement drawing. | Feeder model; dimensions vary with configuration |
| D11 Type | Large apron feeder; confirm installation dimensions, chain configuration and effective width against the model-specific drawing. | Feeder model; dimensions vary with configuration |
These general Apron Feeder part categories help identify the part you need. Confirm suitability against the specific MMD model and drawings.
Apron Pan / Feeder Pan
A general wear part category for Apron Feeder equipment. Confirm the installation position, profile, hole pattern, material and machine model against the equipment drawing. The image illustrates a part category and is not an OEM drawing.
View General Part Details →
Side Liner / Skirt Liner
A general wear part category for Apron Feeder equipment. Confirm the installation position, profile, hole pattern, material and machine model against the equipment drawing. The image illustrates a part category and is not an OEM drawing.
View General Part Details →
Chain Pin / Bushing
A general wear part category for Apron Feeder equipment. Confirm the installation position, profile, hole pattern, material and machine model against the equipment drawing. The image illustrates a part category and is not an OEM drawing.
View General Part Details →
Head Discharge Chute Liner
A general wear part category for Apron Feeder equipment. Confirm the installation position, profile, hole pattern, material and machine model against the equipment drawing. The image illustrates a part category and is not an OEM drawing.
View General Part Details →
Tail Inlet Liner
A general wear part category for Apron Feeder equipment. Confirm the installation position, profile, hole pattern, material and machine model against the equipment drawing. The image illustrates a part category and is not an OEM drawing.
View General Part Details →
Impact Plate
A general wear part category for Apron Feeder equipment. Confirm the installation position, profile, hole pattern, material and machine model against the equipment drawing. The image illustrates a part category and is not an OEM drawing.
View General Part Details →Identify gears, shafts, sleeves, bearings, seals, hydraulic parts, supports and connectors for drawing review. Listed OEM drawing or part references relate to identified parts and require confirmation against your machine.
Chain Pin / Bushing
A general structural or drive part category for Apron Feeder equipment. Confirm interfaces, accuracy, material and machine model against the equipment drawing. The image illustrates a part category and is not an OEM drawing.
View General Part Details →
Sprocket / Traction Wheel
A general structural or drive part category for Apron Feeder equipment. Confirm interfaces, accuracy, material and machine model against the equipment drawing. The image illustrates a part category and is not an OEM drawing.
View General Part Details →Provide the complete model, serial number, drawing or part number, drawing revision, installation position, photographs of the current part, material and operating conditions.
No. General images help identify the part category. Manufacture requires agreed drawings, dimensions, interfaces, materials and acceptance criteria.
Start with the nameplate, general arrangement drawing, installation position, used-part photographs and key dimensions. We can then assess the feasibility of dimensional inspection, material evaluation and manufacture to drawing.
Provide the complete model, serial number, nameplate, installation position, photographs of the current part, drawings, material and operating conditions. We use these to identify the part, assess materials, match manufacturing resources, coordinate quality control and arrange finished-part delivery.
Phone: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with coordinated consulting, supplier sourcing, quality control and finished-part delivery for custom parts, wear parts and industrial spares from China, with scope to support other custom industrial parts.
Equipment and part identification, drawing review, material selection and manufacturing feasibility assessment.
Match requirements with suitable manufacturers in China and coordinate the exchange of technical information.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
Coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts.
Provide the existing model, drawings, drawing or part numbers, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry