Cone crusher · 2001 · 4 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Svedala Eurocone cone crusher | Eurocone 942; Eurocone 1152; Eurocone 1362; Eurocone 1572; Svedala Eurocone13-62 | 2001 | 1 |
| Svedala Hydrocone H Series | Hydrocone H-2000; Hydrocone H-3000; Hydrocone H-4000; Hydrocone H-6000; Hydrocone H-8000; H2000 EC; H-3000; H2800; H3800; H4800; H6800; H7800; H8800 | 2001 | 8 |
| Svedala imperial-size Hydrocone cone crushers | Hydrocone H-22"; Hydrocone 22in; Hydrocone 36in; Hydrocone 45in; Hydrocone 51in; Hydrocone 60in; Hydrocone 72in; Hydrocone 84in | 2001 | 42 |
| Svedala Superior S Series | Hydrocone S-2000; Hydrocone S-3000; Hydrocone S-4000; Hydrocone S-6000; S2800; S3800; S4800; S6800 | 2001 | 8 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Mainshaft | Component at the endpoint of the original Mainshaft leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 2 | Mainshaft Sleeve | Component at the endpoint of the original Mainshaft Sleeve leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 3 | Head Nut | Component at the endpoint of the original Head Nut leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 4 | Head Center | Component at the endpoint of the original Head Center leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 5 | Mantle | Component at the endpoint of the original Mantle leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 6 | Dust Seal Ring | Component at the endpoint of the original Dust Seal Ring leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 7 | Dust Seal Retainer | Component at the endpoint of the original Dust Seal Retainer leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 8 | Eccentric Bushing | Component at the endpoint of the original Eccentric Bushing leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 9 | Eccentric | Component at the endpoint of the original Eccentric leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 10 | Gear | Component at the endpoint of the original Gear leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 11 | Eccentric Wear Plate | Component at the endpoint of the original Eccentric Wear Plate leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 12 | Eccentric Support Plate | Component at the endpoint of the original Eccentric Support Plate leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 13 | Mainshaft Step Plate | Component at the endpoint of the original Mainshaft Step Plate leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 14 | Step Washer | Component at the endpoint of the original Step Washer leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 15 | Piston Wear Plate | Component at the endpoint of the original Piston Wear Plate leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 16 | Spider Cap | Component at the endpoint of the original Spider Cap leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 17 | Spider Arm Shield | Component at the endpoint of the original Spider Arm Shield leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 18 | Spider Bushing | Component at the endpoint of the original Spider Bushing leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 19 | Spider Oil Seal | Component at the endpoint of the original Spider Oil Seal leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 20 | Scraper Ring | Component at the endpoint of the original Scraper Ring leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 21 | Spider | Component at the endpoint of the original Spider leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 22 | Concave | Component at the endpoint of the original Concave leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 23 | Topshell | Component at the endpoint of the original Topshell leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 24 | Shell Bolt | Component at the endpoint of the original Shell Bolt leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 25 | Dust Collar | Component at the endpoint of the original Dust Collar leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 26 | Bottomshell | Component at the endpoint of the original Bottomshell leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 27 | Dust Collar Gasket | Component at the endpoint of the original Dust Collar Gasket leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 28 | Bottomshell Bushing | Component at the endpoint of the original Bottomshell Bushing leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 29 | Arm Liner | Component at the endpoint of the original Arm Liner leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 30 | Sheave | Component at the endpoint of the original Sheave leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 31 | Lock Nut Spacer | Component at the endpoint of the original Lock Nut Spacer leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 32 | Pinionshaft Oil Seal | Component at the endpoint of the original Pinionshaft Oil Seal leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 33 | Pinionshaft Bearing | Component at the endpoint of the original Pinionshaft Bearing leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 34 | Pinionshaft Housing | Component at the endpoint of the original Pinionshaft Housing leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 35 | Pinionshaft | Component at the endpoint of the original Pinionshaft leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 36 | Pinion End Spacer | Component at the endpoint of the original Pinion End Spacer leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 37 | Pinion | Component at the endpoint of the original Pinion leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 38 | Hydroset Bushing | Component at the endpoint of the original Hydroset Bushing leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 39 | Hydroset Piston | Component at the endpoint of the original Hydroset Piston leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 40 | Hydroset Cylinder | Component at the endpoint of the original Hydroset Cylinder leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 41 | Hydroset Seal | Component at the endpoint of the original Hydroset Seal leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
| 42 | Clamp Plate | Component at the endpoint of the original Clamp Plate leader | Hydrocone 22in;Hydrocone 36in;Hydrocone 45in;Hydrocone 51in;Hydrocone 60in;Hydrocone 72in;Hydrocone 84in;Hydrocone 500;Hydrocone 600;Hydrocone 700 |
Models with the same components are grouped together; select a group to open its component table.
| No. | Component | Location | Part / drawing no. |
|---|---|---|---|
| 1 | Main shaft | FLS common adaptation diagram: Mainshaft assembly main shaft | |
| 2 | main shaft protective sleeve | FLS common adaptation diagram: Mainshaft assembly set | |
| 3 | Locking Nut — Moving cone nut | FLS common adaptation diagram: Head Nut | 442.1818-90 |
| 4 | moving cone center body | FLS common adaptation diagram: Head Center | |
| 5 | Mantle / Head Liner | FLS common adaptation diagram: Mantle | 392.6859-02 / 392.9860-02 / 442.6859-02 / 442.6865-02 |
| 6 | Dust Shell Seal | FLS common adaptation diagram: Dust Seal Ring | 442.0713-01 |
| 7 | Dustproof sealed holder | FLS common adaptation diagram: Dust Seal Retainer | |
| 8 | Eccentric Bushing | FLS common adaptation diagram: Eccentric Bushing | |
| 9 | Eccentric body | FLS common adaptation diagram: Eccentric | |
| 10 | Drive Gear — Transmission gear | FLS common adaptation map: Gear | |
| 11 | Eccentric wear plate | FLS common adaptation diagram: Eccentric Wear Plate | |
| 12 | Eccentric support plate | FLS common adaptation diagram: Eccentric Support Plate | |
| 13 | Mainshaft step plate | FLS common adaptation diagram: Mainshaft Step Plate | |
| 14 | Supporting washer | FLS common adaptation diagram: Step Washer | |
| 15 | Piston wear plate | FLS common adaptation diagram: Piston Wear Plate | |
| 16 | Crossbeam cap | FLS common adaptation diagram: Spider Cap | |
| 17 | Arm Guard / Arm Liner — Cross beam arm guard | FLS common adaptation diagram: Spider Arm Shield | |
| 18 | Cross beam bushing | FLS common adaptation diagram: Spider Bushing | |
| 19 | Crossbeam oil seal | FLS common adaptation chart: Spider Oil Seal | |
| 20 | scraper ring | FLS common adaptation diagram: Scraper Ring | |
| 21 | Cross beam | FLS common adaptation map: Spider | |
| 22 | Bowl Liner / Concave | FLS common adaptation diagram: Concave | 392.6869-02 / 392.6873-02 / 392.6878-02 / 442.6926-02 |
| 23 | upper shell | FLS common adaptation diagram: Topshell | |
| 24 | Housing bolts | FLS common adaptation map: Shell Bolt | |
| 25 | Dust jacket | FLS common adaptation diagram: Dust Collar | |
| 26 | Lower shell | FLS common adaptation diagram: Bottomshell | |
| 27 | Dust cover gasket | FLS common adaptation diagram: Dust Collar Gasket | |
| 28 | Lower shell bushing | FLS common adaptation diagram: Bottomshell Bushing | 442.0721-01 |
| 29 | Arm Guard / Arm Liner — Lower shell arm liner | FLS common adaptation diagram: Arm Liner | |
| 30 | Transmission pulley | FLS common adaptation diagram: Sheave | |
| 31 | Lock nut spacer | FLS common adaptation diagram: Lock Nut Spacer | |
| 32 | Pinion shaft oil seal | FLS common adaptation diagram: Pinionshaft Oil Seal | |
| 33 | Pinion Bearing | FLS common adaptation diagram: Pinionshaft Bearing | |
| 34 | Pinion bearing seat | FLS common adaptation diagram: Pinionshaft Housing | |
| 35 | Pinion shaft | FLS common adaptation map: Pinionshaft | |
| 36 | Pinion end spacer | FLS common adaptation diagram: Pinion End Spacer | |
| 37 | Pinion | FLS common adaptation map: Pinion | |
| 38 | Hydroset Bushing | FLS common adaptation diagram: Hydroset Bushing | |
| 39 | Hydroset piston | FLS common adaptation diagram: Hydroset Piston | |
| 40 | Hydroset cylinder | FLS common adaptation diagram: Hydroset Cylinder | |
| 41 | Hydroset seal | FLS common adaptation diagram: Hydroset Seal | |
| Hydroset plywood | FLS common adaptation diagram: Clamp Plate |
| Component | Location | Part / drawing no. |
|---|---|---|
| Drive Gear — Girth gear | Transmission pair | 442.7802-00 |
| Pinion | Transmission pair | 442.7802-00 |
| main shaft and moving cone center body | Moving cone assembly | 442.7910-01 |
| Eccentric assembly | Lower part of crusher | 442.7921-01 |
| Hydroset cylinder and piston | Hydraulic support for the lower part of the main shaft | 442.7889-01 / 442.9668-00 |
| Reborn hopper update category | Feeding point for refurbished main engine | |
| Offline Lubrication Filter (Reborn Update) | Renovation solution lubrication circuit | |
| Hydroset cylinder protection (Reborn update) | Hydroset system external protection |
| Component | Location | Part / drawing no. |
|---|---|---|
| Drive Gear — Girth gear | Transmission pair | 442.7802-00 |
| Pinion | Transmission pair | 442.7802-00 |
| main shaft and moving cone center body | Moving cone assembly | 452.0678-901 / 452.0651-001 / 452.0632-001 / 442.8470-01 |
| Eccentric assembly | Lower part of crusher | 442.8449-01 |
| Hydroset cylinder and piston | Hydraulic support for the lower part of the main shaft | 442.7889-01 / 442.9668-00 |
| Reborn hopper update category | Feeding point for refurbished main engine | |
| Offline Lubrication Filter (Reborn Update) | Renovation solution lubrication circuit | |
| Hydroset cylinder protection (Reborn update) | Hydroset system external protection |
| Component | Location |
|---|---|
| Eurocone13-62 comes with hydraulic station (stock limited) | Seller Complete avec sa centrale hydraulique; not divided into pump/valve/cylinder/controller |
The Cone crusher covers 4 models: Svedala Eurocone cone crusher, Svedala Hydrocone H Series, Svedala imperial-size Hydrocone cone crushers, Svedala Superior S Series. Former and renamed designations are listed in the models table on this page.
The Cone crusher is also documented under these designations: Svedala Eurocone cone crusher, Eurocone 942, Eurocone 1152, Eurocone 1362, Eurocone 1572, Svedala Eurocone13-62, Svedala Hydrocone H Series, Hydrocone H-2000, Hydrocone H-3000, Hydrocone H-4000, Hydrocone H-6000, Hydrocone H-8000, H2000 EC, H-3000.
The Cone crusher is listed under the Svedala brand as: Cone crusher. Period: 2001. Status: Historical model.
53 components are recorded, including: Eurocone13-62 comes with hydraulic station (stock limited), Drive Gear, Pinion, Main shaft, main shaft protective sleeve, Locking Nut, moving cone center body, Mantle / Head Liner and more. The full list with locations is in the components table on this page.
Drive Gear: 442.7802-00, Pinion: 442.7802-00, Locking Nut: 442.1818-90, Mantle / Head Liner: 392.6859-02 / 392.9860-02 / 442.6859-02 / 442.6865-02, Dust Shell Seal: 442.0713-01, Bowl Liner / Concave: 392.6869-02 / 392.6873-02 / 392.6878-02 / 442.6926-02, Lower shell bushing: 442.0721-01.
Model-specific components with their own page: main shaft and moving cone center body, Eccentric assembly, Hydroset cylinder and piston, Reborn hopper update category, Offline Lubrication Filter (Reborn Update), Hydroset cylinder protection (Reborn update), Hydroset Bushing, Hydroset piston and more (13 in total).
CH420 / CH430 / CH440 / CH660; H8000 CH890 CH895; 2017 Reborn, 2017 Reborn: CH420:03→H2000 / H2800 / CH420; CH430:04→H3000 / H3800 / CH430; CH440:03→H4000 / H4800 / CH440; CH660:04→H6000 / H6800 / CH660; CH870:01→H7800 / CH870; CH890:01 And CH895:01 →H8000 / H8800 / CH880 CH890 / CH895;, OEM, H3800 → CH430, H4800 → CH440.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry