What other names or designations is the Dense-medium drum separator known by?
The Dense-medium drum separator is also documented under these designations: Hardinge dense-medium drum separator, Hardinge Heavy-Media Separator.
Dense-medium drum separator
Dense-medium drum separator · 1950-04 · 1 model
Hardinge
HardingeBrand
Dense-medium drum separatorEquipment type
1950-04Period
Historical modelStatus
Hardinge
Models and Historical Names in This Series
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Hardinge dense-medium drum separator | Hardinge Heavy-Media Separator | 1950-04 | 7 |
Hardinge
Numbered Components
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Rotating separator drum | Visible rotating separator drum in Heavy-media separator, 1950 | 1950 Hardinge dense-medium separator |
| 2 | Internal helical flight | Visible internal helical flight in Heavy-media separator, 1950 | 1950 Hardinge dense-medium separator |
| 3 | Circular overflow weir | Visible circular overflow weir in Heavy-media separator, 1950 | 1950 Hardinge dense-medium separator |
| 4 | External base frame | Visible external base frame in Heavy-media separator, 1950 | 1950 Hardinge dense-medium separator |
| 5 | Drum support pedestal | Visible drum support pedestal in Heavy-media separator, 1950 | 1950 Hardinge dense-medium separator |
| 6 | Ore and media feed chute | Visible ore and media feed chute in Heavy-media separator, 1950 | 1950 Hardinge dense-medium separator |
| 7 | Sink discharge chute | Visible sink discharge chute in Heavy-media separator, 1950 | 1950 Hardinge dense-medium separator |
Hardinge
Components by Model
Models with the same components are grouped together; select a group to open its component table.
Hardinge dense-medium drum separator7 items
| No. | Component | Location |
|---|---|---|
| 1 | 1950 heavy media sorting machine cylinder | Slowly rotating inclined cylinder; heavy media and ores enter at the low end |
| 2 | 1950 heavy media separator spiral blade | Fixed on the inner wall of the cylinder, the weight will be moved to the high end as the cylinder rotates; the visible lines are calculated as the total number of turns regardless of the number of cross-sections. |
| 3 | 1950 heavy media separator circular overflow weir | Low-end float overflow |
| 4 | 1950 sorting machine external chassis | Original page cross-section shows actual visual inspection of the long chassis below; illustrative naming of non-OEM parts list |
| 5 | 1950 sorting machine external support seat | The cross-section on the original page shows the actual sight tube lower support; do not push unlabeled supports to determine the supporting wheel/bearing model |
| 6 | 1950 separator ore and medium feeding trough | The tank pointed by the ORE AND MEDIA arrow on the right end of the cross-section diagram on the original page; not an actual measured drawing |
| 7 | 1950 sorting machine sediment discharge chute | The cross-section of the original page shows the flow direction of the high-end chute and SINK; if the floating object discharge opening is not used, it can be guessed as an independent outer chute. |
Frequently asked questions
Which brand and type of equipment is the Dense-medium drum separator?
The Dense-medium drum separator is listed under the Hardinge brand as: Dense-medium drum separator. Period: 1950-04. Status: Historical model.
Which components and wear parts are recorded for the Dense-medium drum separator?
7 components are recorded, including: 1950 heavy media sorting machine cylinder, 1950 heavy media separator spiral blade, 1950 heavy media separator circular overflow weir, 1950 sorting machine external chassis, 1950 sorting machine external support seat, 1950 separator ore and medium feeding trough, 1950 sorting machine sediment discharge chute. The full list with locations is in the components table on this page.
How do I enquire about parts for the Dense-medium drum separator?
Send us a drawing or sample and tell us the equipment model and part name.