What other names or designations is the Diaphragm pump known by?
The Diaphragm pump is also documented under these designations: Hardinge Historical Diaphragm Pump, Hardinge Diaphragm Pump.
Diaphragm pump
Diaphragm pump · 1940-02 · 1 model
Hardinge
HardingeBrand
Diaphragm pumpEquipment type
1940-02Period
Historical modelStatus
Hardinge
Models and Historical Names in This Series
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Hardinge Historical Diaphragm Pump | Hardinge Diaphragm Pump | 1940-02 | 9 |
Hardinge
Numbered Components
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Diaphragm pump body | Visible diaphragm pump body in Diaphragm pump, 1940 | 1940 Hardinge diaphragm pump |
| 2 | External support frame | Visible external support frame in Diaphragm pump, 1940 | 1940 Hardinge diaphragm pump |
| 3 | Base frame | Visible base frame in Diaphragm pump, 1940 | 1940 Hardinge diaphragm pump |
| 4 | Top transverse drive shaft | Visible top transverse drive shaft in Diaphragm pump, 1940 | 1940 Hardinge diaphragm pump |
| 5 | Drive pulley | Visible drive pulley in Diaphragm pump, 1940 | 1940 Hardinge diaphragm pump |
Hardinge
Components by Model
Models with the same components are grouped together; select a group to open its component table.
Hardinge Historical Diaphragm Pump9 items
| No. | Component | Location |
|---|---|---|
| 1 | 1940 Hardinge diaphragm pump body | Connect to slurry pump body |
| 2 | 1940 diaphragm pump external bracket | The actual visual identification of the high bracket shown in the original page illustration. The naming only describes the appearance; it is not the original parts book name. |
| 3 | 1940 diaphragm pump low base | The actual visually recognized rectangular base shown in the original page illustration, not the original parts book name. |
| 4 | 1940 diaphragm pump top transverse drive shaft | The actual external axis in the original page illustration is not supplemented by AI drawings of the internal mechanism or dimensions. |
| 5 | 1940 diaphragm pump top pulley | Original page illustration, actual visual inspection of the upper right pulley; belt specifications/wheel diameter not pushed |
| 1940 Hardinge diaphragm pump bearings | Bearing position to avoid slurry splash; specific quantity/bearing type not specified | |
| 1940 Hardinge diaphragm pump upper valve | The diameter is larger than the lower valve, and the lower valve can be removed through it. | |
| 1940 Hardinge diaphragm pump lower valve | The diameter is smaller than the upper valve, check/replace after the upper valve port | |
| 1940 Hardinge diaphragm pump optional motor drive unit | Announcement can be obtained with motor drive unit; belt drive is an alternative arrangement and must be equipped if not at the same time |
Frequently asked questions
Which brand and type of equipment is the Diaphragm pump?
The Diaphragm pump is listed under the Hardinge brand as: Diaphragm pump. Period: 1940-02. Status: Historical model.
Which components and wear parts are recorded for the Diaphragm pump?
9 components are recorded, including: 1940 Hardinge diaphragm pump body, 1940 Hardinge diaphragm pump bearings, 1940 Hardinge diaphragm pump upper valve, 1940 Hardinge diaphragm pump lower valve, 1940 Hardinge diaphragm pump optional motor drive unit, 1940 diaphragm pump external bracket, 1940 diaphragm pump low base, 1940 diaphragm pump top transverse drive shaft and more. The full list with locations is in the components table on this page.
How do I enquire about parts for the Diaphragm pump?
Send us a drawing or sample and tell us the equipment model and part name.