Hardinge Historical Diaphragm Pump

Diaphragm pump · 1940-02 · 1 model

Hardinge Historical Diaphragm Pump – Diaphragm pump
Hardinge Historical Diaphragm Pump – Diaphragm pump (2)
Hardinge
HardingeBrand
Diaphragm pumpEquipment type
1940-02Period
Historical modelStatus
Hardinge

Models and Historical Names in This Series

Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.

ModelHistorical names / renamingsPeriodComponents
Hardinge Historical Diaphragm PumpHardinge Diaphragm Pump1940-029
Hardinge

Numbered Components

The numbers on the diagram correspond one to one with the rows below.

No.ComponentLocationApplies to
1Diaphragm pump bodyVisible diaphragm pump body in Diaphragm pump, 1940
2External support frameVisible external support frame in Diaphragm pump, 1940
3Base frameVisible base frame in Diaphragm pump, 1940
4Top transverse drive shaftVisible top transverse drive shaft in Diaphragm pump, 1940
5Drive pulleyVisible drive pulley in Diaphragm pump, 1940
Hardinge

Components by Model

Models with the same components are grouped together; select a group to open its component table.

Hardinge Historical Diaphragm Pump9 items
No.ComponentLocation
11940 Hardinge diaphragm pump bodyConnect to slurry pump body
21940 diaphragm pump external bracketThe actual visual identification of the high bracket shown in the original page illustration. The naming only describes the appearance; it is not the original parts book name.
31940 diaphragm pump low baseThe actual visually recognized rectangular base shown in the original page illustration, not the original parts book name.
41940 diaphragm pump top transverse drive shaftThe actual external axis in the original page illustration is not supplemented by AI drawings of the internal mechanism or dimensions.
51940 diaphragm pump top pulleyOriginal page illustration, actual visual inspection of the upper right pulley; belt specifications/wheel diameter not pushed
1940 Hardinge diaphragm pump bearingsBearing position to avoid slurry splash; specific quantity/bearing type not specified
1940 Hardinge diaphragm pump upper valveThe diameter is larger than the lower valve, and the lower valve can be removed through it.
1940 Hardinge diaphragm pump lower valveThe diameter is smaller than the upper valve, check/replace after the upper valve port
1940 Hardinge diaphragm pump optional motor drive unitAnnouncement can be obtained with motor drive unit; belt drive is an alternative arrangement and must be equipped if not at the same time

Frequently asked questions

What other names or designations is the Hardinge Historical Diaphragm Pump known by?

The Hardinge Historical Diaphragm Pump is also documented under these designations: Hardinge Diaphragm Pump.

Which brand and type of equipment is the Hardinge Historical Diaphragm Pump?

The Hardinge Historical Diaphragm Pump is listed under the Hardinge brand as: Diaphragm pump. Period: 1940-02. Status: Historical model.

Which components and wear parts are recorded for the Hardinge Historical Diaphragm Pump?

9 components are recorded, including: 1940 Hardinge diaphragm pump body, 1940 Hardinge diaphragm pump bearings, 1940 Hardinge diaphragm pump upper valve, 1940 Hardinge diaphragm pump lower valve, 1940 Hardinge diaphragm pump optional motor drive unit, 1940 diaphragm pump external bracket, 1940 diaphragm pump low base, 1940 diaphragm pump top transverse drive shaft and more. The full list with locations is in the components table on this page.

How do I enquire about parts for the Hardinge Historical Diaphragm Pump?

Envoyez-nous un plan ou un échantillon et indiquez le modèle d'équipement et le nom de la pièce.

Envoyez-nous un plan ou un échantillon et indiquez le modèle d'équipement et le nom de la pièce

Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.

Demander un devis

Ou contactez-nous directement : +86 156 3797 3199
zzx@anranst.com

Manufacturing Services in China

From Technical Assessment to Finished-Part Delivery

ANRANST provides customers worldwide with engineering assessment, production at certified foundries to drawing, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.

Veuillez fournir la marque de l’équipement, le modèle complet et le numéro de série, le nom de la pièce, sa référence ou le numéro du plan, l’indice de révision du plan, la quantité, les exigences relatives au matériau et les conditions de service. Si ces identifiants ne sont pas disponibles, envoyez des photographies et les dimensions principales.

Submit an Enquiry