أنرانست ANRANSTشركة آنران للتكنولوجيا · لويانغ
ZH EN RU AR
احصل على عرض سعر

خلايا التعويم DELKOR BQR (آلية MAXGen™)

Use published BQR cell ranges and project models to check drawings, materials and supply for rotors, stators, tank liners, launders, level valves, shafts and drives.

DELKOR BQR MAXGen manufacturer image locating tanks, launders and walkways
Current DELKOR BQR gallery: grouped cells with MAXGen™ mechanisms, launders and walkways.
DELKOR South African platinum BQR installation manufacturer image
Current DELKOR BQR gallery: cells, tanks and froth-collection areas in a South African platinum project.
DELKOR Brazilian iron-ore BQR MAXGen installation manufacturer image
Current DELKOR BQR gallery: BQR MAXGen™ cell arrangement in a Brazilian iron-ore project.
OEM المعدات Reference

Identify rotors, stators and tanks for wear parts and spares

DELKOR BQR cells serve rougher, scavenger, cleaner and recleaner stages. Current manufacturer information describes MAXGen™ rotor/stator combinations, customized launders and froth crowders, internal/external dart-valve level control, and segmented stators and crowders for large cells. Enquiries must confirm full BQR model, volume, project or serial number, internal position, rotor/stator design, launders, valves, liners, shafts, drive and drawing revision.

0.5–300 m³ Current manufacturer-published cell volumes
BQR 100–700 Models from published manufacturer projects
Rotor / stator Published MAXGen™ core mechanism
Internal / external dart valves Published level-control options
Standard Models and Key Dimensions

Current cell volumes and published project models

Only cell ranges, models and project combinations traceable to current DELKOR product and project pages are listed. Equal BQR model names, similar volumes or the same ore type do not establish direct interchangeability of rotors, stators, shafts, liners, launders, valves or drives.

Published model / rangePublished dimensions or quantitiesProject and identification detailsProduct status
DELKOR BQR product rangeIndividual cell volume 0.5–300 m³Current product page: confirm MAXGen™ rotor/stator, launders/crowders and level control against the flotation circuit and cell designCurrent product range
BQR 4003 × BQR 400; each published as 40 m³Iron Mountain Project, USA; check cell revision, mechanism, rotor/stator, liners and drive drawingsManufacturer-published project
BQR 500 / BQR 2005 × BQR 500；6 × BQR 200Matilda Wiluna Gold Operation, Australia; dual-outlet froth boxes, dart plugs and adjustable froth lips are published project featuresProject published in 2022
BQR 700 / BQR 5005 × BQR 700；9 × BQR 500South African PGM project with larger mechanisms; confirm specific spares against project drawingsProject published in 2025
BQR 300 / BQR 200 / BQR 1004 × BQR 300；10 × BQR 200；9 × BQR 100Lead-zinc polymetallic project in Bosnia and Herzegovina; models, cell counts and ore type are installation identifiers onlyProject published in 2024

Submit full BQR model, project or serial number, cell volume, flotation stage, internal position, rotor/stator, launders/crowders, valves, liners, shaft and drive drawings, used-part photos and key interface dimensions. Published project combinations do not replace part drawings.

قطع الغيار المستهلكة

Identify rotor, stator, tank-liner and froth-collection wear parts

Current manufacturer information describes MAXGen™ rotor/stator combinations, segmented stators and crowders, and peripheral, radial or combined launders. Confirm wear parts by cell model, flotation stage, slurry, size, concentration, chemical medium, speed, structure and drawings. One project's rubber lining or construction is not a fixed solution for all BQR cells.

DELKOR BQR machine image locating internal rotor and stator positions
01

MAXGen™ Rotor and Stator Assemblies

MAXGen™ Rotor & Stator Assembly

The current page describes an improved rotor/stator combination and segmented stators for large cells. Check rotor diameter, blade/hub design, stator sections, holes, shaft ends, rotation, speed, installation height and old-part wear.

Material selection: The public page does not publish fixed rotor or stator material grades. Confirm material and manufacture against slurry abrasiveness, impact, medium, speed, structure and inspection requirements.

Rubber and polyurethane information Special-alloy material guidance
Open the shared component catalogue →
DELKOR BQR MAXGen cells locating tanks, feed and lower areas
02

Tank Liners, Feed-Zone and Bottom Protection

Tank Liners, Feed-Zone & Bottom Protection

Identify tank liners, feed-box protection, lower manhole surrounds and high-wear areas. Manufacturer project records mention rubber lining, but actual construction, thickness, material and drawing number require the specific tank and service conditions.

Material selection: Select candidate linings against abrasion, medium, temperature, chemical compatibility, impact, bonding or fastening and maintenance conditions.

Rubber and polyurethane information UHMWPE liners
View the common part page →
DELKOR BQR image locating launders, froth lips and upper crowders
03

Launders, Froth Lips and Segmented Crowders

Launders, Froth Lips & Segmented Crowders

Published launders may be peripheral, radial or combined, with customized crowders; large cells may use segmented crowders. Check launder type, froth lip, sections, supports, connections, cleaning and froth-flow direction.

Material selection: Confirm materials and surface solutions for slurry/froth contact parts against medium, wear, stiffness, corrosion, cleaning and site maintenance.

Rubber and polyurethane information Special-alloy material guidance
View the common part page →
قطع الغيار

Shaft, drive, dart-valve and tank-maintenance spares

BQR transmission, level-control and structural parts require specific cell, project and drawing checks. Current information describes internal/external dart valves, bottom manholes for internal-part removal, modular walkways, individual-cell bypass and optional bolted tanks, but no complete OEM spare-number table.

DELKOR South African BQR image locating upper shafts and drives
01

Rotor Shafts, Bushings, Bearings and Drive Interfaces

Rotor Shaft, Bushings, Bearings & Drive Interface

Confirm BQR model, cell volume, shaft ends, rotor design, bushings, bearings, seals, gearbox, motor, coupling, mounting base and rotation. Shafts are commonly matched with the rotor/stator set.

Material selection: Confirm shafts, bushings, bearing housings, seals and connectors separately against loads, medium, lubrication, temperature, dimensional accuracy and inspection requirements.

Drive alloy steel information Bushings and plain-bearing material information
View the common part page →
DELKOR Wiluna Gold BQR image locating froth discharge and level control
02

Internal / External Dart Valves and Level-Control Parts

Internal / External Dart Valves & Level-Control Parts

The current page lists internal and external dart valves; the Wiluna project describes dart plugs and dual-outlet froth-discharge boxes. Check valve body, plug, actuator, seals, piping, interfaces, control logic and cell-stage position.

Material selection: Confirm valves, seals and connectors against slurry medium, pressure, wear, temperature, cycling frequency and inspection standards.

الموانع and engineering plastics information Rubber and polyurethane information
View the common spare-parts catalogue →
DELKOR BQR cells locating tank sections, manholes and structural connections
03

Tank Sections, Manholes and Structural Connections

Tank Sections, Manholes & Structural Connections

The current page offers optional bolted tanks and bottom manholes for removing internal parts. Provide general arrangement, sections, flanges, bolts, access doors, manholes, sealing faces, welding and acceptance requirements.

Material selection: Confirm tank structure, flanges, fasteners, sealing faces and corrosion/wear protection against medium, loads, welding, transport and inspection requirements.

Special-alloy material guidance الموانع and engineering plastics information
View the common spare-parts catalogue →
DELKOR BQR image locating modular walkways and maintenance access between cells
04

Modular Walkways, Cell Bypasses and Maintenance Interfaces

Modular Walkways, Cell Bypass & Maintenance Interfaces

Modular walkways support flexible maintenance layouts, and individual-cell bypass enables faster servicing. Check platforms, handrails, bypass piping, flanges, valves, access positions and safety standards against the project.

Material selection: Confirm structures, connectors, corrosion protection and seals against site medium, loads, regulations and inspection requirements.

Special-alloy material guidance
View the common spare-parts catalogue →
Drawing and Part Numbers

BQR model, project drawing and old part-number checks

Cell ranges and project models are published here, but unverified rotor, stator, bearing, valve or liner numbers are not presented as universal ordering codes. OEM drawings, third-party numbers or used-part records can be mapped to the complete installation after submission.

Submit a DELKOR OEM drawing number or drawing Check BQR model, cell volume, flotation stage, rotor/stator, launders, valves, liners and drawing revision Submit Third-Party References or Used-Part Photographs Locate rotors, stators, shafts, bushings, bearings, liners, launders, crowders, dart valves or tank connections Submit slurry and wear records Select material and manufacture using ore type, size, concentration, abrasiveness, medium, temperature, speed, flotation stage and observed failures

Application rule: Establish part-number applicability only when full BQR model, project or serial number, cell volume, flotation stage, rotor/stator design, position, drawing revision and physical interfaces agree. Public model, cell-count and ore references do not replace part drawings.

Related Technical Pages

DELKOR / TAKRAF installations connect to shared component and material pages

The brand route identifies DELKOR/TAKRAF products and BQR projects; the equipment page locates rotors, stators, liners, valves, shafts and drives; shared component and material pages explain service, materials and manufacture. All lead to technical confirmation and quotation.

TAKRAF / DELKOR brand page Return to group product brands, equipment families and other machines Generic flotation-machine page Review flotation-cell structure, rotors/stators and general material information Common Wear Liner Page Review material selection and manufacturing checks for tank liners, feed zones and guards Shared bearing and bushing page Technical checks for shafts, bearings, bushings and sliding interfaces Submit a Model, Drawing Number or Drawing Drawing and engineering review, production at certified foundries, in-factory inspection and finished-part delivery

What is needed for a DELKOR BQR spare-parts enquiry?

Provide full BQR model, project or serial number, cell volume, flotation stage, rotor/stator, launders/crowders, valves, liners, shafts, drive, OEM drawing number or drawing, used-part photos, key interfaces, material and slurry conditions.

Can cells with the same BQR model or volume share rotors, stators, liners or dart valves?

Not without checking. Flotation stage, mechanism revision, tank, launders, liners, shafts, drives, modifications and drawing revisions may differ. Confirm installation records and actual interfaces.

Why are fixed OEM rotor/stator numbers or material grades not listed?

Public product and project records do not provide complete ordering-code, material and dimension tables. To avoid treating different projects or configurations as interchangeable, numbers and materials are established only after model, project, position, drawings and conditions are matched.

Submit DELKOR BQR model, drawings or used-part records

Provide full model, project number, serial number, cell volume, flotation stage, rotor/stator, launders, valves, liners, shafts, OEM drawing numbers, drawings, used-part photos, material and slurry conditions for consulting, sourcing, quality control and finished-part delivery.

Submit التفاصيل for a Quote

رقم الهاتف: +86 156 3797 3199
zzx@anranst.com

خدمات صنع في الصين

من التقييم الفني إلى تسليم المنتج بالكامل

توفر شركة ANRANST للعملاء العالميين تقييمات هندسية، واختيار التصنيع الصيني، ومراقبة الجودة، وتسليم الأجزاء النهائية لقطع الغيار الصناعية المقاومة للتآكل حسب الطلب، ويمكنها أيضًا دعم قطع الغيار الصناعية الأخرى حسب الطلب.

01

مراجعة الرسومات والهندسة

قم بمراجعة أسطح التزاوج وأبعاد الواجهة، وقم بتقييم جدوى المواد والمعالجة الحرارية والتصنيع.

02

تحديد المادة والمعالجة الحرارية

تُحدَّد درجات المواد وعمليات المعالجة الحرارية لكل طلب على حدة، وتُثبَّت في الاتفاقية الفنية وتُتابَع أثناء الإنتاج.

03

ضبط الجودة

يشمل ذلك تأكيد الرسم، ومراقبة المواد والعمليات، وتتبع الإنتاج، وتنسيق عمليات الفحص والقبول.

04

تسليم المنتج النهائي

تنظيم عمليات التصنيع والتحقق من الجودة والتعبئة والتغليف وتسليم المنتجات النهائية الكاملة لتشكيل حلقة إمداد قابلة للتنفيذ.

قم بتزويدنا بالنماذج الحالية، والرسومات، وأرقام الرسومات، وأرقام الأجزاء، والمواد، أو معلومات ظروف التشغيل، وسنقوم بتحديد التحقق الفني ومسار التوريد وفقًا لذلك.

إرسال طلب