EQUIPMENT-SPECIFIC SPARES
المعدات-specific Spares and Auxiliary Assemblies
Hydraulic adjustment, tensioning and support, conveying passages and protective structures
These components should not be procured under the vague heading of other parts. Their installation interfaces, motion, loads, sealing and control requirements depend directly on the machine. Confirm them against the equipment model, assembly position and drawings.
Category scope
وظيفة Adjustment, support, conveying, flow guidance, protection or overload release
Interfaces Mounting holes, datums, shaft diameters, flanges, piping, electrical controls and stroke
Loads Static loads, impact, vibration, torque, tension, pressure and slurry erosion
Evidence Complete model, assembly and part drawings, nameplate, physical component and operating conditions
Dedicated components that depend on specific equipment interfaces
Liners, gears, bearings, seals, pins and fasteners have their own material and product pages. This page covers equipment-specific hydraulic adjustment, tensioning and support, material conveying, process flow passages and structural protection components.
Adjustment and overload protection
Hydraulic, tie-rod, clamping and lifting assemblies
Confirm function, stroke and installation requirements first, then materials, seals, connections and control conditions.
Impact Crusher
أسطوانة هيدروليكية لضبط حاجز الصدم
Adjusts the apron gap. Some designs also provide opening, resetting or overload release. Check bore, rod diameter, stroke, trunnions, pressure and seals.
Impact Crusher
Apron adjustment rods
Transmit adjustment and holding loads. Confirm threads, end connections, effective length, preload, material and heat treatment against the installed structure.
Cone Crushers
Clamping cylinder assemblies
Apply clamping force to an adjustment ring or related structure. Check the cylinders, mounting brackets, pipe interfaces, seals and operating pressure together.
Toothed roll crushers
وصلات السوائل
Transmit torque in the drive train and cushion starting or overload conditions. Select according to power, speed, shaft ends, fluid fill and connection dimensions.
Spiral Classifier
Spiral Lifting Mechanism
Raises and lowers the spiral shaft and holds its operating or shutdown position. Check stroke, lifting points, screw or hydraulic arrangement, limits and load.
Jaw Crushers
Tension rods and return-preload components
Maintain contact in the toggle mechanism and provide return preload. Check effective length, threads, spring or hydraulic accessories and end connections.
Conveying and support
Buckets, elevator belts, pulleys and screen deck structures
Material selection depends on tension, joints, capacity, temperature and structural stiffness as well as wear.
Bucket Elevator
Elevator buckets
Load and discharge material directly. Determine structure and material from capacity, pitch, holes, conveyed material, speed, temperature and impact.
Bucket Elevator
حزام المصعد
Carry bucket weight, material load and cyclic tension. Check belt width, ply count or steel-cord construction, joints, holes, tension and temperature.
Bucket Elevator
Head and boot pulleys
Drive or redirect the elevator belt. Check diameter, face width, lagging or surface condition, bore, key, hub, bearings and belt speed.
Vibrating Screen
إطار سطح الغربال
Support the screen media and transmit vibration loads. Check beam positions, hole spacing, camber, screen fastening, fatigue-sensitive welds and corrosion protection.
Transfer points and bins
Skirt boards
Contain falling material and dust. Select structure and material according to belt, clearance, particle size, clamping method and wear zones.
Impact Crusher
مجموعة حاجز الصدم
Carries apron liners and establishes the crushing gap. Check the supporting structure, liners, pins, adjustment components and overload movement together.
Flow passages and process interfaces
Slurry guidance, classification and shaft protection components
Review geometry, particles, concentration, pressure, velocity, corrosion and elastomer processing together for wetted components.
Hydrocyclone
Feed heads and chambers
Introduce pulp tangentially into the hydrocyclone. Check inlet shape, flanges, pressure, flow, particles and liner material.
Hydrocyclone
موجه الدوامة
Controls the overflow passage and limits short-circuit flow. Internal diameter, insertion depth, wall thickness, coaxiality and lining material all affect classification.
Hydrocyclone
مخرج النفايات السفلية / القمة
Forms the underflow outlet. Check opening diameter, shape, mounting, elastomer or ceramic structure and actual underflow condition.
Slurry Pump
Pump shaft sleeves
Protect the shaft and provide the seal running surface. Check shaft diameter, seal arrangement, surface hardness and roughness, corrosion and wear.
Flotation Machine
Flotation Machine جلبة العمود
Separate the main shaft from pulp or seal contact zones. Check the shaft, rotor-stator system, seal location and corrosive wear conditions.
Cone Crushers
Main Frame Arm Guards
Protect the frame arms from falling-material impact and scoring. Determine coverage, fastening, plate thickness and observed wear direction.
Material and Manufacturing Requirements
Group by function and failure mode before selecting materials and processes
This page covers several material families. Select options for each component according to its specific equipment and working position.
Materials: Wear-Resistant Materials and Manufacturing ProcessesExplain relationships among material families, operating conditions and failure modes. Determine composition, grade, hardness, heat treatment and dimensional tolerances only after the equipment, drawings and technical requirements are defined.
Failure diagnosis
Abnormal behaviour often involves the system relationships
Review damaged areas, mating parts, loads and operating records together to avoid reproducing the original failure.
| Observed condition | الفحوصات ذات الأولوية | Manufacturing and inspection priorities |
|---|---|---|
| Cylinder leakage, stick-slip or insufficient stroke | Pressure, contamination, barrel and rod surfaces, guides, seals, coaxiality and side loads | Dimensions, roundness, roughness, plating or surface treatment, seal batches and pressure tests |
| Tie-rod, bracket or weld fatigue | Preload, impact, uneven loading, stress concentration, thread roots and installation distortion | المواد والمعالجة الحرارية, transition fillets, welding procedures, non-destructive testing and dimensional datums |
| Elevator belt mistracking or tearing at holes | Pulley alignment, tensioning, pulley surfaces, bucket pitch, joints and overload | Belt construction, hole machining, joints, adhesion, thickness and full-length dimensions |
| Rapid local wear-through of wetted components | Flow direction, inlet turbulence, particle size, concentration, cavitation, installation steps and material continuity | Mould cavities, wall thickness, liner bonding, material batches, hardness or elasticity and dimensional inspection |
| Assembly cannot be installed or movement is obstructed | Model, version, interfaces, datums, stroke, adjacent parts and field modification records | Assembly tolerance chains, trial assembly, movement checks, identification and assembly documentation |
RFQ and ضبط الجودة
Information for equipment-specific auxiliary spare supply
A name alone does not identify a component. Complete information clarifies replacement suitability and complete-set requirements.
تحديد المعدات
OEM, equipment category, complete model, serial number, manufacturing year, modifications and current configuration.
Component identification
Assembly name, installation position, OEM drawing reference, part number, used-part markings and quantity.
Interfaces and motion
Mounting datums, holes, shafts, flanges, threads, piping, stroke, speed, direction, limits and adjacent parts.
الأحمال وظروف التشغيل
Pressure, tension, torque, impact, vibration, temperature, material handled, slurry, corrosion and duty cycle.
Materials and failure history
Current material, heat treatment or lining, service life, wear measurements, cracks, deformation, leakage and photographs.
القبول والمجموعات الكاملة
Dimensions, material properties, non-destructive testing, pressure or functional tests, trial assembly, spare kits, identification and traceability.
Technical references: Metso distinguishes standard, engineered-to-order and equipment-specific mining spare parts and emphasises manufacturing and material options suited to the equipment and operating conditions. Its public scope includes crushing, grinding, screening, flotation, thickening, slurry pumping, conveying and apron feeding systems.Metso Parts for Mining المعدات
الأجزاء والمعدات ذات الصلة
From general functions to equipment and OEM models
General pages explain materials and functions, equipment pages identify installation positions, and OEM pages further establish models, assemblies and drawing references.
كتالوج المعدات العامة Browse crushing, grinding, conveying, classification and mineral processing equipment.
العلامات التجارية والموديلات الأصلية Check brand, series, complete model and historical configuration.
قطع الغيار Catalogue Browse liners, gears, bearings, seals, pins and other defined categories.
Materials and Manufacturing Processes Select material families by operating conditions, failure modes and manufacturing requirements.
Request equipment-specific spare identification and a quotation
Submit equipment models, assembly positions, drawing or part numbers, interface dimensions, operating conditions, used-part photos and failure information.
خدمات صنع في الصين
من التقييم الفني إلى تسليم المنتج بالكامل
توفر شركة ANRANST للعملاء العالميين تقييمات هندسية، واختيار التصنيع الصيني، ومراقبة الجودة، وتسليم الأجزاء النهائية لقطع الغيار الصناعية المقاومة للتآكل حسب الطلب، ويمكنها أيضًا دعم قطع الغيار الصناعية الأخرى حسب الطلب.
مراجعة الرسومات والهندسة
قم بمراجعة أسطح التزاوج وأبعاد الواجهة، وقم بتقييم جدوى المواد والمعالجة الحرارية والتصنيع.
تحديد المادة والمعالجة الحرارية
تُحدَّد درجات المواد وعمليات المعالجة الحرارية لكل طلب على حدة، وتُثبَّت في الاتفاقية الفنية وتُتابَع أثناء الإنتاج.
ضبط الجودة
يشمل ذلك تأكيد الرسم، ومراقبة المواد والعمليات، وتتبع الإنتاج، وتنسيق عمليات الفحص والقبول.
تسليم المنتج النهائي
تنظيم عمليات التصنيع والتحقق من الجودة والتعبئة والتغليف وتسليم المنتجات النهائية الكاملة لتشكيل حلقة إمداد قابلة للتنفيذ.
قم بتزويدنا بالنماذج الحالية، والرسومات، وأرقام الرسومات، وأرقام الأجزاء، والمواد، أو معلومات ظروف التشغيل، وسنقوم بتحديد التحقق الفني ومسار التوريد وفقًا لذلك.
إرسال طلب