Brand and History
From Pump Engineering to Mining Technology: Weir PLC
Brand history helps identify nameplates, equipment age and installation origins. It does not imply that ANRANST is Weir or an authorised agent. Before manufacture, verify the full model, serial number, drawing reference and revision, and physical interfaces.
Core Equipment
Identify Models, Wear Parts and Spares by Weir Equipment Type
The cards use official Weir images of the corresponding machines and link to dedicated OEM equipment pages. This brand page identifies equipment and series; the equipment pages cover part positions, materials, verified drawing references and manufacturing requirements.
Core Wear-Parts Equipment
Warman Horizontal Slurry Pumps
MCR² / MCR / MCR-M / MCU / AH / AHPP / WBH
For mill discharge, cyclone feed, tailings and heavy-duty slurry transport, identify impellers, throatbushes, front and rear liners, casing liners, shaft seals and shaft assemblies.
View the OEM Equipment Page →
Core Comminution Equipment
Enduron High-Pressure Grinding Rolls
ENDURON High Pressure Grinding Rolls
Use the dedicated HPGR page to identify roll tyres, studs, edge wear parts, cheek plates, bearings, hydraulic components and roll-drive spares.
View the OEM Equipment Page →
Classification and Thickening Equipment
Cavex Hydrocyclones
CVX / Cavex 2 / CVXT / CVXA / CVXU / DE
Identify feed chambers, vortex finders, cones, spigots and lining systems. Select rubber, polyurethane or ceramic options according to slurry properties, particle size, pressure and failure location.
View the OEM Equipment Page →
High-Pressure Slurry Transport
GEHO Piston Diaphragm Pumps
TZPM / ZPM / DH / Heat Barrier
Identify valve assemblies, diaphragms, pistons and liners, crankshafts and connecting rods, bearings and power-end spares using the full model, installed pressure and fluid conditions.
View the OEM Equipment Page →
Crushing Equipment
Enduron Jaw and Cone Crushers
ET Jaw / EC Live-shaft Cone / EP Pedestal Cone
Use the equipment page to identify jaw plates, cheek plates, mantles and concaves, bushings, eccentric parts, main shafts, bearings and hydraulic adjustment spares.
View the OEM Equipment Page →
Screening Equipment
Enduron Vibrating Screens
Elite Banana / Dewatering / Orbital Screens
Identify screen panels and mesh, crossbeam and side-plate protection, exciters, bearings, springs and drive components. Select materials and spares for the screening duty.
View the OEM Equipment Page →Current and Historical Installations
Current Series and Installed Equipment Relevant to Wear Parts and Heavy-Duty Spares
Only series and dimensions supported by current Weir websites, official product pages or official historical records are listed. Part numbers without public evidence are not published. Any interchangeability must be confirmed against the nameplate, serial number, drawings and physical dimensions.
| Equipment Series | Standard Models / Configurations | Key Identification Criteria | Product Status |
|---|---|---|---|
| Warman Mill Circuit Pumps | MCR²、MCR、MCR-M、MCU | Published discharge sizes: 125–760 mm; flow rates up to 12,500 m³/h. Confirm the wet-end design, liner material, impeller and shaft seal. | Current Official Product Series |
| Warman Heavy-Duty and Process Pumps | AH、AHPP、WBH；AHF、LF、MF；HTP、XU | Published AH/AHPP discharge sizes: 100–450 mm. For other series, verify discharge size, pressure rating, wet-end design and shaft-seal configuration. | Current Official Product Series |
| Enduron High-Pressure Grinding Rolls | ENDURON HPGR | Selected for each project. Verify roll diameter and width, surface design, installed power, cheek plates and official dimension tables; generic model labels cannot replace installation data. | Current Official Product Series |
| Cavex Classification Cyclones | CVX, Cavex 2, CVXT, CVXA, CVXU, DE, dewatering screens | Published CVX diameters: 40–1,200 mm. Verify the feed chamber, cone angle, vortex finder, spigot, pressure and liner material. | Current Official Product Series |
| GEHO Piston Diaphragm Pumps | TZPM 100–2000, ZPM, TZPM HB, ZPM HB; DH hydraulic piston pumps | Published TZPM flow rates: 10–1,500 m³/h; power: 100–4,000 kW. Verify cylinder count, operating principle, pressure and fluid temperature. | Current Official Product Series |
| Enduron Jaw Crushers | ET Series | Published feed openings: 500 × 900 mm to 1,500 × 2,000 mm; installed power: 55–400 kW. Verify jaw-plate and frame dimensions. | Current Official Product Series |
| Enduron Cone Crushers | EC live-shaft、EP pedestal | Published EC head diameters: 36–84 inches; power: 90–450 kW. Verify chamber type, CSS, shaft assembly, eccentric parts and liner combination. | Current Official Product Series |
| Enduron Vibrating Screens | Elite banana screens, dewatering screens and Orbital horizontal / inclined screens | Verify deck width and length, deck count, exciters, screen-panel modules, feed size and throughput. | Current Official Product Series |
| Installed Trio Equipment | Crushers, screens, feeders, washing and materials-handling equipment | Acquired by Weir in 2014. Verify each installed machine using its full Trio model, serial number, drawing reference and original drawings. | Current Brand / Historical Installations |
Brand Portfolio
Separate Brand Profiles Within the Weir Portfolio
These profiles cover product brands, historical nameplates and installed equipment. Current Enduron and Cavex equipment is accessed through the cards above, avoiding duplicate catalogues.
Warman A slurry-pump brand established in 1938, with identification focused on wet-end wear parts, shaft seals and shaft-assembly spares. View the Warman Brand Profile → GEHO A piston diaphragm and hydraulic piston pump brand, with identification focused on valves, diaphragms and power-end spares. View the GEHO Brand Profile → Trio A crushing, screening, feeding and washing equipment brand acquired by Weir in 2014. Its profile remains available for identifying installed equipment. View the Trio Brand Profile →
From Identification to Delivery
From Installed Weir Equipment to Parts, Materials and Delivery
Use this brand page to identify the equipment and series, then the equipment page to check models, key dimensions, part positions and known references. General component and material pages cover operating conditions, failure modes, candidate materials, manufacturing processes and inspection requirements before technical confirmation and quotation.
OEM Brand Directory Find installed equipment by brand, country and equipment category. Back to the Brand Directory → General Equipment Directory Explore technical information by equipment design, part position and operating conditions. View the Equipment Directory → General Components and Materials Review part functions, candidate materials, manufacturing processes and inspection requirements. View the Component Directory →