Start with the brand, equipment series and installed machine, then explore wear parts, drive and structural spares, materials and processes, drawing review, quality control and finished-part delivery.
This page covers equipment series and models, part locations, materials and processes, drawing review and inquiry options. Before manufacture or quotation, confirm OEM drawing numbers, dimensions and tooling suitability against the complete model and drawings.
The model table assists with machine identification. Manufacture and quotation require the nameplate, complete model, serial number, drawing number, general arrangement and drawing revision.
| Series / Model | Equipment Range and Identification | Equipment History and Identification |
|---|---|---|
| Canica 1400 | Compact VSI with a single motor; maximum capacity of 125 tph (115 mtph); HD/HDS/ROR/ROS chamber configurations | 2026 product specifications; actual capacity depends on chamber configuration, feed and speed |
| Canica 2000SD | Single motor drive (SD); maximum capacity of 250 tph (225 mtph), maximum feed size of 100 mm; HD/HDS/ROR/ROS configurations | 2026 product specifications; actual capacity depends on chamber configuration, feed and speed |
| Canica 2000DD | Dual motor drive (DD); maximum capacity of 350 tph (314 mtph), for shaping and fine crushing | 2026 product specifications; actual capacity depends on chamber configuration, feed and speed |
| Canica 2050 | Single or dual motor drive; maximum capacity of 400 tph (365 mtph), maximum feed size of 100 mm; HD/HDS/ROR/ROS configurations | 2026 product specifications; actual capacity depends on chamber configuration, feed and speed |
| Canica 2300 | VSI for demanding crushing applications | 2026 product specifications; actual capacity depends on chamber configuration, feed and speed |
| Canica 2350 | Dual motor drive; maximum capacity of 600 tph (545 mtph), maximum feed size of 205 mm; HD/HDS configurations | 2026 product specifications; actual capacity depends on chamber configuration, feed and speed |
| Canica 2500 | Dual motor drive for shaping and fine crushing; identify the drive configuration from the installed machine's nameplate and drawings. | 2026 product specifications; actual capacity depends on chamber configuration, feed and speed |
| Canica 3000 | The highest-capacity model in the range, for high output and consistent product shape | 2026 product specifications; actual capacity depends on chamber configuration, feed and speed |
These general Sand Making Machine part categories help identify the part you need. Confirm suitability against the specific Terex MPS model and drawings.
Tip / Cavity Wear Plate
A general wear part category for Sand Making Machine equipment. Confirm the installation position, profile, hole pattern, material and machine model against the equipment drawing. The image illustrates a part category and is not an OEM drawing.
View General Part Details →
Upper Internal Wear Plate
A general wear part category for Sand Making Machine equipment. Confirm the installation position, profile, hole pattern, material and machine model against the equipment drawing. The image illustrates a part category and is not an OEM drawing.
View General Part Details →
Lower Internal Wear Plate
A general wear part category for Sand Making Machine equipment. Confirm the installation position, profile, hole pattern, material and machine model against the equipment drawing. The image illustrates a part category and is not an OEM drawing.
View General Part Details →Distributor Plate
A general wear part category for Sand Making Machine. Confirm the installation position, profile, hole pattern, material and applicable model against the equipment drawings.
View General Part Details →
Trail Plate
A general wear part category for Sand Making Machine equipment. Confirm the installation position, profile, hole pattern, material and machine model against the equipment drawing. The image illustrates a part category and is not an OEM drawing.
View General Part Details →
Top External Wear Plate
A general wear part category for Sand Making Machine equipment. Confirm the installation position, profile, hole pattern, material and machine model against the equipment drawing. The image illustrates a part category and is not an OEM drawing.
View General Part Details →Identify gears, shafts, sleeves, bearings, seals, hydraulic parts, supports and connectors for drawing review. Listed OEM drawing or part references relate to identified parts and require confirmation against your machine.
Pedestal Protection Liner
A general structural or drive part category for Sand Making Machine equipment. Confirm interfaces, accuracy, material and machine model against the equipment drawing. The image illustrates a part category and is not an OEM drawing.
View General Part Details →
Main Shaft
A general structural or drive part category for Sand Making Machine equipment. Confirm interfaces, accuracy, material and machine model against the equipment drawing. The image illustrates a part category and is not an OEM drawing.
View General Part Details →
Rotor Bearing
A general structural or drive part category for Sand Making Machine equipment. Confirm interfaces, accuracy, material and machine model against the equipment drawing. The image illustrates a part category and is not an OEM drawing.
View General Part Details →
Bearing Pedestal / Housing
A general structural or drive part category for Sand Making Machine equipment. Confirm interfaces, accuracy, material and machine model against the equipment drawing. The image illustrates a part category and is not an OEM drawing.
View General Part Details →
Rotor Bearing Seal
A general structural or drive part category for Sand Making Machine equipment. Confirm interfaces, accuracy, material and machine model against the equipment drawing. The image illustrates a part category and is not an OEM drawing.
View General Part Details →
Drive V-Belt
A general structural or drive part category for Sand Making Machine equipment. Confirm interfaces, accuracy, material and machine model against the equipment drawing. The image illustrates a part category and is not an OEM drawing.
View General Part Details →Provide the complete model, serial number, drawing or part number, drawing revision, installation position, photographs of the current part, material and operating conditions.
No. General images help identify the part category. Manufacture requires agreed drawings, dimensions, interfaces, materials and acceptance criteria.
Start with the nameplate, general arrangement drawing, installation position, used-part photographs and key dimensions. We can then assess the feasibility of dimensional inspection, material evaluation and manufacture to drawing.
Provide the complete model, serial number, nameplate, installation position, photographs of the current part, drawings, material and operating conditions. We use these to identify the part, assess materials, match manufacturing resources, coordinate quality control and arrange finished-part delivery.
Phone: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with coordinated consulting, supplier sourcing, quality control and finished-part delivery for custom parts, wear parts and industrial spares from China, with scope to support other custom industrial parts.
Equipment and part identification, drawing review, material selection and manufacturing feasibility assessment.
Match requirements with suitable manufacturers in China and coordinate the exchange of technical information.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
Coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts.
Provide the existing model, drawings, drawing or part numbers, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry