Balanced vibrating screen · 2004—2015 · 2 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| F-Screen balanced vibrating screen | F-Screen 36 x 8; F-Screen 36 x 10; F-Screen 48 x 8; F-Screen 48 x 10; F-Screen 48 x 12; F-Screen 48 x 14; F-Screen 48 x 16 | 2004—2015 | 40 |
| F60-Screen balanced vibrating screen | F60-Screen 5 x 12; F60-Screen 5 x 14; F60-Screen 5 x 16; F60-Screen 5 x 18 | 2004—2015 | 38 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Vibrating feed box | Feed box at left end of plan view | F-Screen (OEM dimensioned-view configuration) |
| 2 | Removable steel screen frame | Screen frame in plan view | F-Screen (OEM dimensioned-view configuration) |
| 3 | Channel base | Channel base beneath end elevation | F-Screen (OEM dimensioned-view configuration) |
| 4 | F60 screen frame | Upper longitudinal frame member in plan view | F60-Screen |
| 5 | F60 feed box | Feed box at left of plan view | F60-Screen |
| Component |
|---|
| F screen balance layer steel bar |
| F screen feed distributor |
| F screen sheet support spring |
| Four driving springs for F screen |
| F screen external motor |
| F screen external V-belt |
| Parts page Screen Sheave |
| Parts page Shaft |
| Parts page Drive Spring |
| Parts page Drive Spring Pad |
| Parts page Main Box Tie |
| Parts page Main Box Bolt |
| Parts page Shaft Nut Washer |
| Parts page Shaft Nut (Shaft Nut) |
| Parts page Main Box |
| Parts page Main Box Bearing |
| Parts page Flywheel |
| Parts page Main Box Cap |
| Parts page Drive Box |
| Parts page Drive Box Bearing |
| Parts page Drive Box Cap |
| Parts page Shaft Housing |
| Parts page Balance Weights |
| Parts page Bearing Spacer |
| Parts page Outside Flinger |
| Parts page Drive Box Flinger |
| Parts page Main Box Flinger |
| Parts page Shaft Housing Guard |
| Parts page Spring Ring Spacer |
| Parts page Main Box Stud Bolt |
| Parts page Shaft Washer |
| Parts page Drive Bearing Spacer |
| Parts page Main Bearing Spacer |
| F screen screening layer assembly |
| F screen balance layer assembly |
| F screen shaft assembly |
| Parts page Shaft Wrench |
Models with the same components are grouped together; select a group to open its component table.
| No. | Component | Location | Part / drawing no. |
|---|---|---|---|
| 1 | F screen vibrating feed box | Feeding end, installed on the balance layer steel bar | |
| 2 | F screen detachable steel screen frame | Screen layer carries screen surface | |
| 3 | F screen channel steel base | Below the screening layer and balance layer, connected by supporting springs | |
| F screen balance layer steel bar | Both sides of the screening layer support the feed box | ||
| F screen feed distributor | In the feeding box, materials are divided along the screen width | ||
| F screen sheet support spring | Between the base and the screening/balancing layer, 60° between the original text and the horizontal | ||
| Four driving springs for F screen | Between the shaft assembly and the screening layer; the quantity is only designed for this page | ||
| F screen external motor | Outside dust cover; keep away from heat/dust | ||
| F screen external V-belt | Dust cover outer drive | ||
| Parts page Screen Sheave | F Screen Shaft Assembly | F55-3C16 / F55-3C16x3 | |
| Parts page Shaft | F Screen Shaft Assembly | ||
| Parts page Drive Spring | F Screen Shaft Assembly | F211 / F211-312 / F211-322 | |
| Parts page Drive Spring Pad | F Screen Shaft Assembly | F213 / F213-6 | |
| Parts page Main Box Tie | F Screen Shaft Assembly | F214 / F214-648 | |
| Parts page Main Box Bolt | F Screen Shaft Assembly | F215 | |
| Parts page Shaft Nut Washer | F Screen Shaft Assembly | F218 | |
| Parts page Shaft Nut (Shaft Nut) | F Screen Shaft Assembly | F21-N / F21-6-48 / F21-N6 | |
| Parts page Main Box | F Screen Shaft Assembly | F22 / F22-6 | |
| Parts page Main Box Bearing | F Screen Shaft Assembly | F220 / 22318 | |
| Parts page Flywheel | F Screen Shaft Assembly | F222 / F222-6 | |
| Parts page Main Box Cap | F Screen Shaft Assembly | F23 / F23-6 | |
| Parts page Drive Box | F Screen Shaft Assembly | F24 / F24-6 | |
| Parts page Drive Box Bearing | F Screen Shaft Assembly | F240 / 23224 | |
| Parts page Drive Box Cap | F Screen Shaft Assembly | F25 / F25-6 | |
| Parts page Shaft Housing | F Screen Shaft Assembly | F26 / F26-548 | |
| Parts page Balance Weights | F Screen Shaft Assembly | F27 | |
| Parts page Bearing Spacer | F Screen Shaft Assembly | F28 | |
| Parts page Outside Flinger | F Screen Shaft Assembly | F29-0 / F29-06 | |
| Parts page Drive Box Flinger | F Screen Shaft Assembly | F29-D / F29-D6 | |
| Parts page Main Box Flinger | F Screen Shaft Assembly | F29-M / F29-M6 | |
| Parts page Shaft Housing Guard | F Screen Shaft Assembly | F35 / F221-248 | |
| Parts page Spring Ring Spacer | F Screen Shaft Assembly | F107-177 / F107-187 | |
| Parts page Main Box Stud Bolt | F Screen Shaft Assembly | F215-7 | |
| Parts page Shaft Washer | F Screen Shaft Assembly | F218-6 | |
| Parts page Drive Bearing Spacer | F Screen Shaft Assembly | F28-D6 | |
| Parts page Main Bearing Spacer | F Screen Shaft Assembly | F28-M6 | |
| F screen screening layer assembly | Rigid box screening layer | ||
| F screen balance layer assembly | Composed of heavy steel bars on both sides of the screening layer and feed box | ||
| F screen shaft assembly | fixed on the balance layer, connected to the screening layer with a driving spring | ||
| Parts page Shaft Wrench | F Screen Shaft Assembly | F21-W6 |
| Component | Location | Part / drawing no. |
|---|---|---|
| F60 screen detachable steel screen frame | Screen layer carries screen surface | |
| F60 screen balance layer steel bar | Both sides of the screening layer support the feed box | |
| F60 screen vibrating feed box | Feeding end, installed on the balance layer steel bar | |
| F60 screen feed distributor | In the feeding box, materials are divided along the screen width | |
| F60 screen channel steel base | Below the screening layer and balance layer, connected by supporting springs | |
| F60 screen sheet support spring | Between the base and the screening/balancing layer, 60° between the original text and the horizontal | |
| Four driving springs for F60 screen | Between the shaft assembly and the screening layer; the quantity is only designed for this page | |
| F60 screen heavy duty drive bearing | Shaft assembly; heavy duty option 130mm, not all configurations promoted | |
| F60 screen frame clamping parts | Fixed screen frame inside the screen layer | |
| F60 screen clamping bolt | Screen frame clamping position | |
| F60 screening with side tensioned screen cloth | Screen layer surface; optional | |
| F60 screen spring tensioning splint | Optional side tensioning screen cloth fixing | |
| Parts page Screen Sheave | In F60- Shaft Assembly | F55-3C16x3 |
| Parts page Spring Ring Spacer | F Screen Shaft Assembly | F107-177 / F107-187 |
| Parts page Drive Spring | In F60- Shaft Assembly | F211-312 |
| Parts page Drive Spring Pad | In F60- Shaft Assembly | F213-6 |
| Parts page Main Box Tie | In F60- Shaft Assembly | F214-660 |
| Parts page Main Box Stud Bolt | F Screen Shaft Assembly | F215-7 |
| Parts page Spacer | In F60- Shaft Assembly | F216-1 |
| Parts page Shaft | In F60- Shaft Assembly | F21-760 |
| Parts page Shaft Washer | F Screen Shaft Assembly | F218-6 |
| Parts page Shaft Nut (Shaft Nut) | In F60- Shaft Assembly | F21-N6 |
| Parts page Shaft Housing Guard | In F60- Shaft Assembly | F221-260 |
| Parts page Flywheel | In F60- Shaft Assembly | F222-6 |
| Parts page Main Box | In F60- Shaft Assembly | F22-7 |
| Parts page Main Box Cap | In F60- Shaft Assembly | F23-6 |
| Parts page Drive Box | In F60- Shaft Assembly | F24-6M |
| Parts page Drive Bearing Spacer | In F60- Shaft Assembly | F25-6M / F28-D7 |
| Parts page Shaft Housing | In F60- Shaft Assembly | F26-560 |
| Parts page Main Bearing Spacer | In F60- Shaft Assembly | F28-M7 |
| Parts page Outside Flinger | In F60- Shaft Assembly | F29-07 |
| Parts page Drive Box Flinger | In F60- Shaft Assembly | F29-D6 |
| Parts page Main Box Bearing | In F60- Shaft Assembly | 22318 |
| Parts page Drive Box Bearing | In F60- Shaft Assembly | 23224 |
| F60 screen layer assembly | Rigid box screening layer | |
| F60 screen balance layer assembly | Composed of heavy steel bars on both sides of the screening layer and feed box | |
| F60 screen shaft assembly | fixed on the balance layer, connected to the screening layer with a driving spring | |
| Parts page Wrench | In F60- Shaft Assembly | F21-W6 |
The Screens Balanced vibrating screen covers 2 models: F-Screen balanced vibrating screen, F60-Screen balanced vibrating screen. Former and renamed designations are listed in the models table on this page.
The Screens Balanced vibrating screen is also documented under these designations: F-Screen balanced vibrating screen, F-Screen 36 x 8, F-Screen 36 x 10, F-Screen 48 x 8, F-Screen 48 x 10, F-Screen 48 x 12, F-Screen 48 x 14, F-Screen 48 x 16, F60-Screen balanced vibrating screen, F60-Screen 5 x 12, F60-Screen 5 x 14, F60-Screen 5 x 16, F60-Screen 5 x 18.
The Screens Balanced vibrating screen is listed under the Symons brand as: Balanced vibrating screen. Period: 2004—2015. Status: Historical model.
75 components are recorded, including: F screen detachable steel screen frame, F screen balance layer steel bar, F screen vibrating feed box, F screen feed distributor, F screen channel steel base, F screen sheet support spring, Four driving springs for F screen, F screen external motor and more. The full list with locations is in the components table on this page.
Parts page Screen Sheave: F55-3C16 / F55-3C16x3, Parts page Drive Spring: F211 / F211-312 / F211-322, Parts page Drive Spring Pad: F213 / F213-6, Parts page Main Box Tie: F214 / F214-648, Parts page Main Box Bolt: F215, Parts page Shaft Nut Washer: F218, Parts page Shaft Nut (Shaft Nut): F21-N / F21-6-48 / F21-N6, Parts page Main Box: F22 / F22-6, Parts page Main Box Bearing: F220 / 22318, Parts page Flywheel: F222 / F222-6.
Model-specific components with their own page: F screen screening layer assembly, F screen balance layer assembly, F screen shaft assembly, Parts page Shaft Wrench, F60 screen layer assembly, F60 screen balance layer assembly, F60 screen shaft assembly, Parts page Wrench (8 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry