What other names or designations is the Screens Rod grizzly screen known by?
The Screens Rod grizzly screen is also documented under these designations: K Rod Grizzly Screen rod grizzly screen, K Rod Grizzly Screen 50 x 8, K25.
Screens Rod grizzly screen
Rod grizzly screen · 2004—2015 · 1 model
Symons
SymonsBrand
Rod grizzly screenEquipment type
2004—2015Period
Historical modelStatus
Symons
Models and Historical Names in This Series
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| K Rod Grizzly Screen rod grizzly screen | K Rod Grizzly Screen 50 x 8; K25 | 2004—2015 | 49 |
Symons
Numbered Components
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Grizzly housing | Grizzly housing in side elevation | K Rod Grizzly |
| 2 | Drive motor | Motor at upper right of side elevation | K Rod Grizzly |
| 3 | V-belt | Belt between motor and vibrator sheave | K Rod Grizzly |
Other Components · 40 items
| Component |
|---|
| K rod pre-screened parallel spring steel rod |
| K rod pre-screened formed rubber spacer |
| K rod scalping screen with closed cover |
| K rod pre-screened removable end plate and top cover |
| Parts page Base (Base) |
| Parts page Head End Top |
| Parts page Foot End Top |
| Parts page Support Angle |
| Parts page Feed Box |
| Parts page Base Cover -opposite drive |
| Parts page Spring Seat |
| Parts page Feed Box Plate |
| Parts page Cheek Plate |
| Parts page Rocker Rubber |
| Parts page Deck Spring |
| Parts page Rocker Spring |
| Parts page Rocker |
| Parts page Fastening hardware (type stated; dimensions omitted) |
| Parts page Rocker Bolt Rubber |
| Parts page Screen side plate (Deck Side) |
| Parts page Cross Bar - Arch |
| Parts page Cross Bar Arch |
| Parts page middle horizontal bar (Cross Bar -Between) |
| Parts page Top Bar - Foot End |
| Parts page Fastening hardware (name not fully specified) |
| Parts page Vibrator Beam |
| Parts page Feeding end piece (Head End) |
| Parts page Feed Cross Bar |
| Parts page Deck Feed Plate |
| Parts page Vibrator Guard -Top |
| Parts page Vibrator Guard-Bottom |
| Parts page Lever Nut (Lever Nut) |
| Parts page Bracket Nut |
| Parts page Rod Clamp Bar |
| Parts page Rod Clamp Rubber |
| Parts page Clamp Hole Cover |
| Parts page Cover Retainer |
| Parts page Feed Cross Bar Rubber |
| Parts page Bolt Sleeve |
| Parts page Clamp Washer (original text includes rocker parts) (Clamp Washer Inc. Rocker Amt.) |
Symons
Components by Model
Models with the same components are grouped together; select a group to open its component table.
K Rod Grizzly Screen rod grizzly screen49 items
| Component | Location | Part / drawing no. |
|---|---|---|
| K rod pre-screened parallel spring steel rod | Rod screen surface | |
| K rod pre-screened formed rubber spacer | Rod positioning/spacing | |
| K rod scalping screen with closed cover | Outside of screen machine; optional | |
| K rod pre-screened removable end plate and top cover | Optional closing cover at both ends and top | |
| Parts page Base (Base) | K Rod Grizzly | K11-9 |
| Parts page Head End Top | K Rod Grizzly | K11-C9 |
| Parts page Foot End Top | K Rod Grizzly | K11-E7 |
| Parts page Support Angle | K Rod Grizzly | K11-G7 |
| Parts page Feed Box | K Rod Grizzly | K11-H8 |
| Parts page Base Cover -opposite drive | K Rod Grizzly | K11-J1 |
| Parts page Spring Seat | K Rod Grizzly | K11-M3 / K11-R1 / K38-1 |
| Parts page Feed Box Plate | K Rod Grizzly | K11-P1 |
| Parts page Cheek Plate | K Rod Grizzly | K11-Q1 / K36-90 |
| Parts page Rocker Rubber | K Rod Grizzly | K15-1 |
| Parts page Deck Spring | K Rod Grizzly | K16-2 |
| Parts page Rocker Spring | K Rod Grizzly | K17-1 |
| Parts page Rocker | K Rod Grizzly | K18-5 |
| Parts page Fastening hardware (type stated; dimensions omitted) | K Rod Grizzly | |
| Parts page Rocker Bolt Rubber | K Rod Grizzly | K19-2 |
| Parts page Screen side plate (Deck Side) | K Rod Grizzly | K31-8 |
| Parts page Cross Bar - Arch | K Rod Grizzly | K3A-3 / K3A-4 |
| Parts page middle horizontal bar (Cross Bar -Between) | K Rod Grizzly | K3B-2 / K3D-5 |
| Parts page Top Bar - Foot End | K Rod Grizzly | K3E-2 |
| Parts page Fastening hardware (name not fully specified) | K Rod Grizzly | |
| Parts page Vibrator Beam | K Rod Grizzly | K32-8 |
| Parts page Feeding end piece (Head End) | K Rod Grizzly | K33-4 |
| Parts page Feed Cross Bar | K Rod Grizzly | K34-1 |
| Parts page Deck Feed Plate | K Rod Grizzly | K35-1 |
| Parts page Vibrator Guard -Top | K Rod Grizzly | K37-6T |
| Parts page Vibrator Guard-Bottom | K Rod Grizzly | K37-6B |
| Parts page Lever Nut (Lever Nut) | K Rod Grizzly | K39-1 |
| Parts page Bracket Nut | K Rod Grizzly | K310-1 |
| Parts page Rod Clamp Bar | K Rod Grizzly | K311-1 |
| Parts page Rod Clamp Rubber | K Rod Grizzly | K312-1 |
| Parts page Clamp Hole Cover | K Rod Grizzly | K313-1 |
| Parts page Cover Retainer | K Rod Grizzly | K313-R1 |
| Parts page Feed Cross Bar Rubber | K Rod Grizzly | K319-1 |
| Parts page Bolt Sleeve | K Rod Grizzly | K326-1 |
| Parts page Clamp Washer (original text includes rocker parts) (Clamp Washer Inc. Rocker Amt.) | K Rod Grizzly | K350-1 |
| Parts page Clamp Rubber Washer | K Rod Grizzly | K351-1 |
| Parts page Top Cover | K Rod Grizzly | K14-16F |
| Parts page End Cover | K Rod Grizzly | K14-27F |
| Parts page Back Cover | K Rod Grizzly | K116-1 |
| Parts page Side Cover | K Rod Grizzly | K117-1 / K117-2 |
| Parts page Belt Drive Motor Base (Motor Base -Belt Drive) | K Rod Grizzly | K11-F18 |
| Parts page Direct drive motor base (Motor Base -Direct Drive) | K Rod Grizzly | K11-T1 |
| K rod pre-screened K exciter | Screen machine vibrates; the specific shaft assembly is not documented | |
| K rod scalping screen external drive interface | Outside the dust cover; the required 10HP motor is not included in the supply | |
| Parts page Cheek Plate Set | K Rod Grizzly | K36-90 |
Frequently asked questions
Which brand and type of equipment is the Screens Rod grizzly screen?
The Screens Rod grizzly screen is listed under the Symons brand as: Rod grizzly screen. Period: 2004—2015. Status: Historical model.
Which components and wear parts are recorded for the Screens Rod grizzly screen?
49 components are recorded, including: K rod pre-screened parallel spring steel rod, K rod pre-screened formed rubber spacer, K rod scalping screen with closed cover, K rod pre-screened removable end plate and top cover, Parts page Base (Base), Parts page Head End Top, Parts page Foot End Top, Parts page Support Angle and more. The full list with locations is in the components table on this page.
Which drawing or part numbers are listed for the Screens Rod grizzly screen?
Parts page Base (Base): K11-9, Parts page Head End Top: K11-C9, Parts page Foot End Top: K11-E7, Parts page Support Angle: K11-G7, Parts page Feed Box: K11-H8, Parts page Base Cover -opposite drive: K11-J1, Parts page Spring Seat: K11-M3 / K11-R1 / K38-1, Parts page Feed Box Plate: K11-P1, Parts page Cheek Plate: K11-Q1 / K36-90, Parts page Rocker Rubber: K15-1.
Which model-specific components of the Screens Rod grizzly screen have their own page?
Model-specific components with their own page: K rod pre-screened K exciter, K rod scalping screen external drive interface, Parts page Cheek Plate Set (3 in total).
How do I enquire about parts for the Screens Rod grizzly screen?
Send us a drawing or sample and tell us the equipment model and part name.