Underground scraper conveyor · 2026-10-01 · 1 model
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Kopeysk 2SR70M underground scraper conveyor | Копейск Underground scraper conveyor 2СР70М; Копейск 2СР70М | 2026-10-01 | 7 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location |
|---|---|---|
| 1 | Conveyor trough | Elongated conveying body |
| 2 | Head drive housing | Left end of machine |
| Component |
|---|
| 2СР70М chain factory matching round link chain 18×64 |
| 2СР70М chain factory matching connector 18×64 |
| Scraper Blade / Flight Bar — 2СР70М chain factory supporting prototype scraper |
| Scraper Blade / Flight Bar — 2СР70М-05 chain factory matching scraper |
| Scraper Blade / Flight Bar — 2СР70М-07 chain factory matching scraper |
| 2СР70М-05 chain factory supplies assembly chain segments |
| 2СР70М-07 chain factory supplies assembly chain segments |
Models with the same components are grouped together; select a group to open its component table.
| Component | Location | Part / drawing no. |
|---|---|---|
| 2СР70М chain factory matching round link chain 18×64 | Chain segment traction component; the chain moves along the bottom of the groove, supplying 15 links and 6 segments per segment | |
| 2СР70М chain factory matching connector 18×64 | PDF26 printing 50 pages clearly adapted to 2СР70М; upper part reinforced for chain connection | ЗС-2-1 18×64 / ЗС-2-18×64-1 |
| Scraper Blade / Flight Bar — 2СР70М chain factory supporting prototype scraper | Chain factory webpage matching prototype 2СР70М; PDF31 printing 60 pages length 440mm/center distance 500mm/18×64 | |
| Scraper Blade / Flight Bar — 2СР70М-05 chain factory matching scraper | PDF33 printing 64 pages, length 305mm, center distance 365mm, 18×64 chain; only -05 specifications listed by the supplier | С-5-1-305/18×64/365 |
| Scraper Blade / Flight Bar — 2СР70М-07 chain factory matching scraper | PDF33 printing 64 pages, 440mm long, 500mm center distance, 18×64 chain; the same model is also listed as СП-63, and the whole machine cannot be interchanged | С-5-2-440/18×64/500 |
| 2СР70М-05 chain factory supplies assembly chain segments | 3.072m chain segment/365mm center distance; 3 scrapers, 6 segments of 15 chain links each, 6 connectors | ЦСК 4 |
| 2СР70М-07 chain factory supplies assembly chain segments | 3.072m chain segment/500mm center distance; 3 scrapers, 6 segments of 15 chain links each, 6 connectors | ЦСК 3 |
The Underground scraper conveyor is also documented under these designations: Kopeysk 2SR70M underground scraper conveyor, Копейск Underground scraper conveyor 2СР70М, Копейск 2СР70М.
The Underground scraper conveyor is listed under the Kopeysk brand as: Underground scraper conveyor. Period: 2026-10-01. Status: Listed in the manufacturer's current catalogue.
7 components are recorded, including: 2СР70М chain factory matching round link chain 18×64, 2СР70М chain factory matching connector 18×64, Scraper Blade / Flight Bar, Scraper Blade / Flight Bar, Scraper Blade / Flight Bar, 2СР70М-05 chain factory supplies assembly chain segments, 2СР70М-07 chain factory supplies assembly chain segments. The full list with locations is in the components table on this page.
2СР70М chain factory matching connector 18×64: ЗС-2-1 18×64 / ЗС-2-18×64-1, Scraper Blade / Flight Bar: С-5-1-305/18×64/365, Scraper Blade / Flight Bar: С-5-2-440/18×64/500, 2СР70М-05 chain factory supplies assembly chain segments: ЦСК 4, 2СР70М-07 chain factory supplies assembly chain segments: ЦСК 3.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry