Which models does the Coal cutter cover?
The Coal cutter covers 2 models: Kopeysk KMP coal cutter, Kopeysk Ural-33M coal cutter. Former and renamed designations are listed in the models table on this page.
Coal cutter
Coal cutter · 1943–1946 · 2 models
Kopeysk
KopeyskBrand
Coal cutterEquipment type
1943–1946Period
Historical modelStatus
Kopeysk
Models and Historical Names in This Series
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Kopeysk KMP coal cutter | КМП; КМП-2; Копейск КМП-1 | 1943–1946 | 9 |
| Kopeysk Ural-33M coal cutter | Урал-33М | 2026-10-01 | 5 |
Kopeysk
Numbered Components
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | External anchor post | External rope anchor; not a standard OEM coal-cutting part | КМП-2 (permafrost construction) |
| 1 | Cutting bar | Long cutting bar beside the machine | Урал-33М |
| 2 | Machine body | Machine body in the upper view of Fig. 1 | КМП-2 (permafrost construction) |
| 2 | Cutting chain | Around the cutting bar | Урал-33М |
| 3 | Cutting bar | Cutting bar at right in the upper view of Fig. 1 | КМП-2 (permafrost construction) |
Other Components · 10 items
| Component |
|---|
| КМП2 construction case motor |
| КМП2 construction modification skid |
| КМП2 traction winch |
| КМП2 traction drum |
| КМП2 traction wire rope |
| КМП2 cutting chain |
| Уралец sprocket for КМП2 construction |
| Ural33M single piston hydraulic pump |
| Ural33M double acting hydraulic cylinder |
| Ural33M motor |
Kopeysk
Components by Model
Models with the same components are grouped together; select a group to open its component table.
Kopeysk KMP coal cutter9 items
| No. | Component | Location |
|---|---|---|
| 2 | КМП2 body shape category | Figure 1 No. 2 корпус машины, the original diagram is not dismantled inside |
| 3 | КМП2 cutting guide rod | Number 3 in Figure 1 is бар; the case changes the vertical angle and does not supplement the length of the guide rod. |
| КМП2 construction case motor | The original text is 47kW, the manufacturer/motor model is not specified. | |
| КМП2 construction modification skid | ||
| КМП2 traction winch | The original text comes with тяговая лебедка, pulled to the external anchor post | |
| КМП2 traction drum | Original coiled rope барабан, diameter/gear/brake composition not specified | |
| КМП2 traction wire rope | original text тяговый трос/канат, external anchor post connection, no specifications specified | |
| КМП2 cutting chain | The working procedure is clear режущая цепь, the pitch/material is not documented | |
| Уралец sprocket for КМП2 construction | Construction case chain teeth, non-model Урал complete machine or supplier part number |
Kopeysk Ural-33M coal cutter5 items
| No. | Component | Location |
|---|---|---|
| 1 | Ural33M cutting guide arm bar | Original hydraulic cylinder is used for bar transfer; 1.6-2.2m length selection |
| 2 | Ural33M stamped side plate-less balanced cutting chain | Original pitch 76mm/140mm wide; don’t guess the steel grade from the stamping process |
| Ural33M single piston hydraulic pump | Cutting part hydraulic drive original table | |
| Ural33M double acting hydraulic cylinder | bar transferred to actuator | |
| Ural33M motor | 75kW text version; specific motor model not included |
Frequently asked questions
What other names or designations is the Coal cutter known by?
The Coal cutter is also documented under these designations: Kopeysk KMP coal cutter, КМП, КМП-2, Копейск КМП-1, Kopeysk Ural-33M coal cutter, Урал-33М.
Which brand and type of equipment is the Coal cutter?
The Coal cutter is listed under the Kopeysk brand as: Coal cutter. Period: 1943–1946. Status: Historical model.
Which components and wear parts are recorded for the Coal cutter?
14 components are recorded, including: КМП2 construction case motor, КМП2 construction modification skid, КМП2 traction winch, КМП2 traction drum, КМП2 traction wire rope, КМП2 cutting guide rod, КМП2 cutting chain, Уралец sprocket for КМП2 construction and more. The full list with locations is in the components table on this page.
How do I enquire about parts for the Coal cutter?
Send us a drawing or sample and tell us the equipment model and part name.