Bunker transfer unit · 2026-10-01 · 2 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Kopeysk BP-15 bunker transfer unit | БП-15; БП-15-01 | 2026-10-01 | 3 |
| Kopeysk BPS self-propelled bunker transfer unit | БПС-22; БПС-15 | 2026-10-01 | 5 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Hopper and side panels | Sides of the elongated hopper | БПС-22 |
| 1 | Bunker body | Upper bunker | БП-15 |
| 2 | Pneumatic tyres and hubs | Near-side wheel group beneath body | БПС-22 |
| 2 | Travel chassis | Chassis beneath bunker | БП-15 |
| 3 | Exposed hydraulic cylinder | Below left end of hopper | БПС-22 |
| 4 | Lower support frame | Support beneath the hopper | БПС-22 |
| Component |
|---|
| БПС22 original picture exposed hose |
| BP15-01 tire-type traveling chassis (2008 project) |
Models with the same components are grouped together; select a group to open its component table.
| No. | Component | Location |
|---|---|---|
| 1 | БПС22 original picture of warehouse and side panels | The original picture has БПС-22 printed on the fuselage, and the shape of the long bin/side panel is visible; it does not have БПС-15 or other БПС modifications. |
| 2 | БПС22 original picture pneumatic tires and wheels | The two patterned tires and wheel hubs on the near side are visible; the number of wheels/steering/drive distribution is not completed in the blocked part |
| 3 | The original picture of БПС22 exposes the hydraulic cylinder | The exposed cylinder/rod connection at the left end of the silo is visible; the use/stroke/pressure is not determined |
| 4 | БПС22 original picture lower support frame | The wheel support and box-like shape of the lower part of the silo are visible; the inside of the gear/differential/brake cannot be judged from this |
| БПС22 original picture exposed hose | Exposed hoses are visible on the wheel and near the silo; no hydraulic diagram, no circuit/joint specifications to be made up |
| No. | Component | Location |
|---|---|---|
| 1 | BP15 silo body | 13m³ silo; height/width position can be changed relative to the chassis |
| 2 | BP15 walking chassis | The position of the car body relative to the chassis is clearly stated in the original note; the wheel/track form is not specified. |
| BP15-01 tire-type traveling chassis (2008 project) | The manufacturer's item description is clear пневмоколёсный; refers to pneumatic tires, without transmission mode |
The Hopper transfer conveyor covers 2 models: Kopeysk BP-15 bunker transfer unit, Kopeysk BPS self-propelled bunker transfer unit. Former and renamed designations are listed in the models table on this page.
The Hopper transfer conveyor is also documented under these designations: Kopeysk BP-15 bunker transfer unit, БП-15, БП-15-01, Kopeysk BPS self-propelled bunker transfer unit, БПС-22, БПС-15.
The Hopper transfer conveyor is listed under the Kopeysk brand as: Bunker transfer unit. Period: 2026-10-01. Status: Listed in the manufacturer's current catalogue.
8 components are recorded, including: BP15 silo body, BP15 walking chassis, BP15-01 tire-type traveling chassis (2008 project), БПС22 original picture of warehouse and side panels, БПС22 original picture pneumatic tires and wheels, The original picture of БПС22 exposes the hydraulic cylinder, БПС22 original picture exposed hose, БПС22 original picture lower support frame. The full list with locations is in the components table on this page.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry