What other names or designations is the Track down-the-hole and water-well Drill rig known by?
The Track down-the-hole and water-well Drill rig is also documented under these designations: GATOR, GATOR DRILTECH.
Crawler down-the-hole and water well drilling rig · 2002-01 · 1 model


Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Driltech Gator tracked down-the-hole/water well drilling rig | GATOR; Gator; GATOR DRILTECH | 2002-01 | 21 |
Models with the same components are grouped together; select a group to open its component table.
| Component | Location | Part / drawing no. |
|---|---|---|
| Vertical air storage tank | Water well high pressure air system | |
| Liquid level sight glass and safety relief valve | Vertical air storage tank | |
| Minimum pressure valve and oil and gas separation filter element | High pressure air storage tank/separation area | |
| Separate pressure difference indication and oil return system | Compressor separation circuit | |
| Oil temperature thermostat and oil cooling bypass valve | Compressor cooling oil circuit | |
| Oil cooler and oil stop valve | Compressor oil circuit | |
| Temperature/pressure safety switch | High voltage system monitoring | |
| Two-stage air compression host, discharge check valve and high temperature hose | High pressure air system | |
| Double closed-loop piston pump and electronic displacement valve | Gator drilling/walking switching | |
| Travel/drilling direction switching collecting valve | Gator pump end | |
| Hot oil shuttle valve and central valve plate | Above the left track frame of 320 track Gator | |
| Vane pump outlet diverter valve | Gator base valve group and HPR oil supply | |
| Base electric proportional multi-way valve | Boom lifting/swinging, feed tilt/telescopic and other functions | 018835-037 |
| Power feeding proportional multi-way valve | Power clamp, clamping wrench, rod mounting, centering, and dust cover functions | |
| Manual override and travel limiter | Gator base/feed multi-way valve | |
| Travel relay and cockpit junction box | Gator multi-function control | |
| 2002 version dual temperature sensor and fan control module | Gator fan electronic control has been clarified since 2002-01; not all old versions | |
| 76 series adapted drill pipe | Gator drill string; description 76mm; 2⅜R, L2896/3962mm | |
| 89 series adapted drill pipe | Gator drill string; description 89 but ØA90mm; 2⅜R L2896, 2⅜IF L6096, 2⅞R L2896/3962mm | |
| 102 series adapted drill pipe | Gator drill string; 2⅜IF or 2⅞REG, L3962mm | |
| 114 series adapted drill pipe | Gator drill string; 3½REG, L2896/3962mm |
The Track down-the-hole and water-well Drill rig is also documented under these designations: GATOR, GATOR DRILTECH.
The Track down-the-hole and water-well Drill rig is listed under the DrilTech Mission brand as: Crawler down-the-hole and water well drilling rig. Period: 2002-01. Status: Historical model.
21 components are recorded, including: Vertical air storage tank, Liquid level sight glass and safety relief valve, Minimum pressure valve and oil and gas separation filter element, Separate pressure difference indication and oil return system, Oil temperature thermostat and oil cooling bypass valve, Oil cooler and oil stop valve, Temperature/pressure safety switch, Two-stage air compression host, discharge check valve and high temperature hose and more. The full list with locations is in the components table on this page.
Base electric proportional multi-way valve: 018835-037.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry