What other names or designations is the Truck-mounted rotary Drill rig known by?
The Truck-mounted rotary Drill rig is also documented under these designations: Driltech D40K Rotadrill.
Truck-mounted rotary drilling rig · 2021 · 1 model


Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Driltech D40K Rotadrill Truck Mounted Drilling Rig | Driltech D40K Rotadrill | 2021 | 10 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Mast | Horizontal transport-position mast above the truck | D40K Rotadrill (truck-mounted installation in government tender appendix) |
| 2 | Truck chassis | Wheeled truck chassis beneath the drill | D40K Rotadrill (truck-mounted installation in government tender appendix) |
| 3 | Mast raising cylinder | Upright orange cylinder near the middle of the deck | D40K Rotadrill (truck-mounted installation in government tender appendix) |
| Component |
|---|
| D40K vehicle-mounted oil bath single-stage rotary gearbox |
| D40K vehicle-mounted dual hydraulic swing motor |
| D40K vehicle-mounted feed hydraulic cylinder and chain drive |
| D40K vehicle-mounted mast lifting and lowering hydraulic cylinder |
| D40K vehicle-mounted planetary winch and brake |
| D40K vehicle load-sensitive hydraulic system and filtration |
| D40K vehicle-mounted water injection pump |
| D40K vehicle-mounted pneumatic plunger drilling tool lubrication pump |
| D40K vehicle-mounted drill pipe and casing guide port |
| D40K vehicle-mounted task lighting |
Models with the same components are grouped together; select a group to open its component table.
| Component | Location |
|---|---|
| D40K vehicle-mounted oil bath single-stage rotary gearbox | Top drive rotary head |
| D40K vehicle-mounted dual hydraulic swing motor | Top drive rotary head |
| D40K vehicle-mounted feed hydraulic cylinder and chain drive | Top drive lifting/drilling tower feed |
| D40K vehicle-mounted mast lifting and lowering hydraulic cylinder | Vehicle-mounted mast lifting mechanism |
| D40K vehicle-mounted planetary winch and brake | Auxiliary lifting mechanism |
| D40K vehicle load-sensitive hydraulic system and filtration | Drilling rig hydraulic circuit |
| D40K vehicle-mounted water injection pump | Drilling water injection circuit |
| D40K vehicle-mounted pneumatic plunger drilling tool lubrication pump | Drilling tool lubrication circuit |
| D40K vehicle-mounted drill pipe and casing guide port | Mast drilling tool operating area |
| D40K vehicle-mounted task lighting | Mast, control panel and working area |
The Truck-mounted rotary Drill rig is also documented under these designations: Driltech D40K Rotadrill.
The Truck-mounted rotary Drill rig is listed under the DrilTech Mission brand as: Truck-mounted rotary drilling rig. Period: 2021. Status: Historical model.
10 components are recorded, including: D40K vehicle-mounted oil bath single-stage rotary gearbox, D40K vehicle-mounted dual hydraulic swing motor, D40K vehicle-mounted feed hydraulic cylinder and chain drive, D40K vehicle-mounted mast lifting and lowering hydraulic cylinder, D40K vehicle-mounted planetary winch and brake, D40K vehicle load-sensitive hydraulic system and filtration, D40K vehicle-mounted water injection pump, D40K vehicle-mounted pneumatic plunger drilling tool lubrication pump and more. The full list with locations is in the components table on this page.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry