01
Swing Hammer
Swing Hammers
- Category / Position
- W
- Material Options
- Tough forged alloy steel with differential heat treatment.
Coal Impactor
CoalPactor is a Pennsylvania Crusher / TerraSource Global coal impact crusher. Coal enters the top of the chamber, is struck by swing hammers and thrown against curved breaker plates on either side. The hammer-to-plate clearance progressively narrows along the flow path to control top size and limit fines. Applications include coal preparation for power generation and metallurgical use in the steel industry. Confirm model and capacity through the manufacturer's selection data.
Equipment Section View
CoalPactor is a Pennsylvania Crusher / TerraSource Global coal impact crusher. Coal enters the top of the chamber, is struck by swing hammers and thrown against curved breaker plates on either side. The hammer-to-plate clearance progressively narrows along the flow path to control top size and limit fines. Applications include coal preparation for power generation and metallurgical use in the steel industry. Confirm model and capacity through the manufacturer's selection data.
Equipment Parts
Part Identification and Technical Details
Explore part names, images, material options and technical requirements. Select a card to open the corresponding replacement part page.
Individual parts
Individual and Maintenance Parts
02
Hammer Suspension Bar
Hammer Suspension Bars
- Category / Position
- T
- Material Options
- Quenched and tempered alloy steel is an engineering candidate; the OEM drawing determines the final specification.
03
Hammer Suspension Disc
Hammer Suspension Disc
- Category / Position
- T
- Material Options
- Carbon-manganese steel plate.
04
Rotor Shaft
Rotor Shafts
- Category / Position
- T
- Material Options
- A machined forged steel shaft, internally drilled for hydraulic bearing removal.
06
Breaker Plate Adjustment Frame
Breaker-Plate Adjustment Frames
- Category / Position
- T/S
- Material Options
- A load-bearing structural assembly, typically using a fabricated or cast structure with a pin or screw adjustment system.
07
Frame Wear Liner
Frame Wear Liner
- Category / Position
- P
- Material Options
- Replaceable abrasion-resistant steel liners; confirm the grade against the drawing and operating conditions.
08
Retrofit Cage Crushing Segment
Retrofit Cage Crushing-Surface Segments
- Category / Position
- W/S
- Material Options
- The newer plate segments use a harder material. Confirm the grade and hardness against the drawing and operating conditions.
09
Spherical Roller Bearing
Spherical Roller Bearings
- Category / Position
- S
- Material Options
- Tapered-bore spherical roller bearings; raceway material and heat treatment are defined by the exact bearing designation and manufacturer's specification.
10
Split Pillow-Block Bearing Housing
Split Bearing Housings
- Category / Position
- T/S
- Material Options
- Split pillow-block housing. Confirm the housing material against the drawing; cast iron or cast steel are engineering candidates only.
11
Bearing Seal
Bearing Seals
- Category / Position
- S
- Material Options
- Select NBR, HNBR, FKM, labyrinth or combined seals for the temperature and lubricant.
Materials for similarly named parts may differ by OEM, machine model and operating conditions. Confirm the machine model, drawing and measured dimensions before ordering or manufacture.
Materials for similarly named parts may differ by OEM, machine model and operating conditions. Confirm the machine model, drawing and measured dimensions before ordering or manufacture.