Concasseur à percussion charbon Coalpactor

CoalPactor is a Pennsylvania Crusher / TerraSource Global coal impact crusher. Coal enters the top of the chamber, is struck by swing hammers and thrown against curved breaker plates on either side. The hammer-to-plate clearance progressively narrows along the flow path to control top size and limit fines. Applications include coal preparation for power generation and metallurgical use in the steel industry. Confirm model and capacity through the manufacturer's selection data.

Coal Impactor

Coalpactor (Pennsylvania Crusher / TerraSource) : marteaux oscillants réversibles, plaque courbe et fond ouvert pour plafonner le topsize et limiter les fines. Préparation charbon vapeur/cokéfaction ; dimensionnement OEM. Brochure marketing marteaux multi-produits (réf. C09) ≠ adaptation vérifiée à cette machine — ne devient pas dureté ni durée de vie « machine ».

Equipment Parts

Part Identification and Technical Details

Principaux : marteaux, plaques/segments, disques/barres de suspension, blindages de bâti, arbre et paliers. Familles de procédé vérifiées uniquement.

Individual parts

Pièces unitaires et de maintenance

01

Swing Hammer

Swing Hammers

Category / Position
W
Material Options
Tough forged alloy steel with differential heat treatment.
02

Hammer Suspension Bar

Hammer Suspension Bars

Category / Position
T
Material Options
Quenched and tempered alloy steel is an engineering candidate; the OEM drawing determines the final specification.
Hammer Suspension Disc
03

Hammer Suspension Disc

Hammer Suspension Disc

Category / Position
T
Material Options
Carbon-manganese steel plate.
04

Rotor Shaft

Rotor Shafts

Category / Position
T
Material Options
A machined forged steel shaft, internally drilled for hydraulic bearing removal.
05

Breaker Plate

Breaker Plates

Category / Position
W
Material Options
Carbon-manganese steel plate.
06

Breaker Plate Adjustment Frame

Breaker-Plate Adjustment Frames

Category / Position
T/S
Material Options
A load-bearing structural assembly, typically using a fabricated or cast structure with a pin or screw adjustment system.
07

Frame Wear Liner

Frame Wear Liner

Category / Position
P
Material Options
Replaceable abrasion-resistant steel liners; confirm the grade against the drawing and operating conditions.
08

Retrofit Cage Crushing Segment

Retrofit Cage Crushing-Surface Segments

Category / Position
W/S
Material Options
The newer plate segments use a harder material. Confirm the grade and hardness against the drawing and operating conditions.
09

Spherical Roller Bearing

Spherical Roller Bearings

Category / Position
S
Material Options
Tapered-bore spherical roller bearings; raceway material and heat treatment are defined by the exact bearing designation and manufacturer's specification.
10

Split Pillow-Block Bearing Housing

Split Bearing Housings

Category / Position
T/S
Material Options
Split pillow-block housing. Confirm the housing material against the drawing; cast iron or cast steel are engineering candidates only.
11

Bearing Seal

Bearing Seals

Category / Position
S
Material Options
Select NBR, HNBR, FKM, labyrinth or combined seals for the temperature and lubricant.

Materials for similarly named parts may differ by OEM, machine model and operating conditions. Confirm the machine model, drawing and measured dimensions before ordering or manufacture.

Les matériaux de pièces homonymes peuvent différer selon l’OEM, le modèle et le régime. Confirmez modèle, plan et cotes avant commande.

Structure/fonction et frontière OEM (2026-11-02 · C09 resserré)

  • Marteaux : forge + traitement différentiel ; rotor réversible ; famille de procédé seulement — pas de nuance/HRC/épaisseur mini figée.
  • Plaques : tôle carbone-manganèse réglable (pas une affirmation Hadfield) ; jeu se resserre dans le sens du flux.
  • Segments : segments moulés de retrofit versionnés ; densification ≠ double durée de vie.
  • Blindages de bâti : bâti épais + tôles anti-abrasion remplaçables ; portes latérales.
  • Interdit / C09 : C09 est une brochure multi-produits sans mapping pièce-à-pièce Coalpactor ; alliages propriétaires ou rechargements qui y figurent ne doivent pas être rédigés comme schéma marteau ou tableau dureté/durée pour cette machine.

Request a Coal Impactor Wear Parts Proposal

Provide the machine model, operating conditions and target service life so our engineers can recommend materials and prepare a quotation.

Demander un devis

Ou contactez-nous directement : +86 156 3797 3199
zzx@anranst.com

Manufacturing Services in China

From Technical Assessment to Finished-Part Delivery

ANRANST provides customers worldwide with engineering assessment, production at certified foundries to drawing, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.

Veuillez fournir la marque de l’équipement, le modèle complet et le numéro de série, le nom de la pièce, sa référence ou le numéro du plan, l’indice de révision du plan, la quantité, les exigences relatives au matériau et les conditions de service. Si ces identifiants ne sont pas disponibles, envoyez des photographies et les dimensions principales.

Submit an Enquiry