HIGmill Support and Sealing Spares
Bearings, Sleeves and الموانع
Bearing, Sleeve and Seal System
Check bearings, shaft sleeves, bearing housings and shaft seals separately within the HIGmill vertical main shaft support system. Match these parts to the installed model, journal dimensions, fits, tolerances, lubrication and seal design; generic names alone are insufficient.
المعدات Metso / Swiss Tower Mills HIGmill
موقع التركيب Upper main shaft support, bearing housings and seal journals
Key variables Shaft diameter, fits, loads, speed, lubrication and sealed medium
متطلبات التحديد Model, serial number, support assembly drawing, individual part drawings and used-part dimensions
Assembly scopeIndividual part supply Bearing, shaft sleeve, bearing housing or seal Repair kit Match support and sealing parts to the assembly arrangement Key accuracy requirements Fits, tolerances, coaxiality, roughness and face runout Site conditions Loads, speed, lubrication, temperature and process medium ingress
Identify the four part types separately or specify a combined support and sealing kit
Bearings carry radial and axial loads; sleeves provide fit, protection or positioning; housings establish mounting datums and lubrication passages; shaft seals separate lubricants from slurry, moisture and dust. State whether the RFQ covers an individual replacement or a repair kit with mating parts.
The image illustrates the HIGmill main shaft and upper support arrangement. Confirm individual bearing, sleeve, housing and seal geometry and interfaces against the equipment drawings, part numbers or dimensional surveys.
Spare part categories
Four areas to check in the support and sealing system
Parts with the same name may have different dimensions and construction across HIGmill models and equipment versions.
Main shaft bearings
Check bearing type, inside and outside diameters, width, clearance, accuracy, load direction, lubrication method and original bearing designation.
Shaft Sleeves and Bushings
Check the mounting journal, interference or clearance fit, wall thickness, length, locating features, surface hardness and wear allowance.
Bearing Housings and Covers
Check mounting datums, bore diameter, coaxiality, lubrication passages, fastening holes, split construction and frame connections.
Shaft Seal Assemblies
Check seal type, shaft diameter, grooves, operating pressure, temperature, speed, process medium, elastomers and mating metal parts.
المواد والعمليات
Match materials to part function and failure mode
Use material pages for initial selection. Confirm the final grade, hardness, heat treatment and seal material against the drawings, operating medium and temperature.
Bearing Copper Alloys and Sliding Materials For sleeves, bushings or thrust parts with sliding contact. Check loads, speed, lubrication, mating shaft material and permissible temperature rise. Alloy Steels for Drive Parts For highly loaded sleeves, housing mating parts and load-bearing metal parts. Confirm strength, toughness, hardenability and dimensional stability. Sealing Elastomers and Engineering Plastics For shaft seals, backup rings and composite seals. Select for slurry, water or oil exposure, temperature, pressure, surface speed and chemical compatibility.
Models and drawing references
Applicable HIGmill configurations
Confirm bearing designations, sleeve dimensions and seal specifications for each model separately.
| HIGmill Model | Identification priorities | Drawing Number / Part Number |
|---|---|---|
| HIG3500/23000 | Check the main shaft, supports, lubrication and seal assembly against the 3,500 kW installed configuration | Confirm against the serial number, support assembly drawing and individual part drawings |
| HIG500/4000 | Check against the 500 kW installed configuration and site modification version | Confirm against the serial number, support assembly drawing and individual part drawings |
| HIG25 / HIG5 | Identify pilot and test equipment separately; industrial unit specifications do not apply automatically | Confirm against the nameplate, bearing and seal designations, and equipment drawings |
| Other industrial HIGmill models | Provide power, chamber volume, serial number, main shaft and bearing housing interface data | Record OEM drawing references, bearing designations, seal designations and third-party references separately |
Match third-party drawing references to the specific equipment model, serial number range, part category, drawing revision and key dimensions. Similar names alone do not establish equivalence.
RFQ information
Support and sealing spare part identification information
Complete information helps prevent incorrect bearing clearance, sleeve fit or seal material selection.
تحديد المعدات
OEM, full model, serial number, nameplate and modification history.
Part scope
Individual bearing, shaft sleeve, bearing housing or seal, or a repair kit.
Drawing references and designations
OEM references, bearing designations, seal designations, third-party references and drawing revisions.
الأبعاد الرئيسية
Shaft diameter, bore diameter, width, fits, tolerances, grooves and mounting datums.
ظروف التشغيل and media
Loads, speed, temperature, lubricants, slurry, water and dust conditions.
سجلات الأعطال
Temperature rise, vibration, leaks, wear, heat damage, corrosion and service-life history.
الأجزاء والمعدات ذات الصلة
Coordinate equipment, main shaft and materials
Access this product page through the OEM equipment model, general spare parts or material selection routes.
Metso HIGmill المعدات Return to machine models, wear parts and spares. العمود الرئيسي ومجموعة دعم الدوار Check the shaft sections corresponding to the bearings and seals. Bearing Copper Alloy Materials Review selection criteria for sliding bearing materials. الموانع and Engineering Plastics Select according to process medium, temperature and surface speed.
Request a HIGmill Support and Sealing قطع الغيار Proposal
Provide the equipment model, serial number, assembly drawing, part designations, key dimensions, operating conditions and failure information for technical review and quotation.
خدمات صنع في الصين
من التقييم الفني إلى تسليم المنتج بالكامل
توفر شركة ANRANST للعملاء العالميين تقييمات هندسية، واختيار التصنيع الصيني، ومراقبة الجودة، وتسليم الأجزاء النهائية لقطع الغيار الصناعية المقاومة للتآكل حسب الطلب، ويمكنها أيضًا دعم قطع الغيار الصناعية الأخرى حسب الطلب.
مراجعة الرسومات والهندسة
قم بمراجعة أسطح التزاوج وأبعاد الواجهة، وقم بتقييم جدوى المواد والمعالجة الحرارية والتصنيع.
تحديد المادة والمعالجة الحرارية
تُحدَّد درجات المواد وعمليات المعالجة الحرارية لكل طلب على حدة، وتُثبَّت في الاتفاقية الفنية وتُتابَع أثناء الإنتاج.
ضبط الجودة
يشمل ذلك تأكيد الرسم، ومراقبة المواد والعمليات، وتتبع الإنتاج، وتنسيق عمليات الفحص والقبول.
تسليم المنتج النهائي
تنظيم عمليات التصنيع والتحقق من الجودة والتعبئة والتغليف وتسليم المنتجات النهائية الكاملة لتشكيل حلقة إمداد قابلة للتنفيذ.
قم بتزويدنا بالنماذج الحالية، والرسومات، وأرقام الرسومات، وأرقام الأجزاء، والمواد، أو معلومات ظروف التشغيل، وسنقوم بتحديد التحقق الفني ومسار التوريد وفقًا لذلك.
إرسال طلب