Vibrating rod-deck screen · 2004—2015 · 2 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| K Rod Deck Screen vibrating rod-deck screen | K Rod Deck Screen 3 x 6; K Rod Deck Screen 4 x 6; K Rod Deck Screen 4 x 8; K Rod Deck Screen 5 x 8; K48-3 | 2004—2015 | 47 |
| K Twin Rod Deck Screen twin rod-deck vibrating screen | K Twin Rod Deck Screen 6 x 8; K Twin Rod Deck Screen 6 x 10; K Twin Rod Deck Screen 6 x 12; K610-3 | 2004—2015 | 44 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Coil spring | Spring above screen body | K Rod Deck |
| 2 | Drive motor | Motor at upper right of side elevation | K Rod Deck |
| 3 | V-belt | V-belt between motor and vibrator sheave | K Rod Deck |
| 4 | Screen housing | Housing in side elevation | K Rod Deck |
| 5 | Screen housing | Housing in side elevation | K Twin Rod Deck |
| Component |
|---|
| K rod screen parallel spring steel rod |
| K rod screen forming rubber spacer |
| K rod screen rubber shaking seat |
| K rod screen spiral spring |
| K rod screen drive motor |
| K rod screen flexible coupling |
| K rod screen drive pulley |
| K rod screening with removable dust cover |
| Parts page Bolt (Bolt) |
| Parts page Rods or spacers (size per application) |
| Parts page Spring Cap |
| Parts page Vibrator Cover |
| Parts page Back Cover |
| Parts page Sides |
| Parts page Feeding end bottom part (Head End-Bottom) |
| Parts page Head End-Top |
| Parts page Foot End-Bottom |
| Parts page Foot End-Top |
| Parts page Support Angle |
| Parts page Spring Seat |
| Parts page Corner Brace |
| Parts page Deck Bolt Rubber |
| Parts page Washer |
| Parts page Top Cover |
| Parts page End Cover |
| Parts page Rocker Rubber |
| Parts page Deck Spring |
| Parts page Rocker Spring |
| Parts page Rocker |
| Parts page Rocker Bolt Rubber |
| Parts page Screen Sides (Deck Sides) |
| Parts page Rod Top Rubber |
| Parts page Vibrator Beam-Foot |
| Parts page Vibrator Beam-Head |
| Parts page Fastening hardware (name not fully specified) |
| Parts page Feeding end piece (Head End) |
| Parts page Vibrator Guards |
| Parts page Cross Bar Foot |
| Parts page Cross Bar Head |
| Parts page Cross Bar Between |
Models with the same components are grouped together; select a group to open its component table.
| Component | Location | Part / drawing no. |
|---|---|---|
| K rod screen parallel spring steel rod | Rod screen surface | |
| K rod screen forming rubber spacer | Rod positioning/spacing | |
| K rod screen rubber shaking seat | Screen surface feed end support; about 30° motion line | |
| K rod screen spiral spring | Screen surface discharge end support | |
| K rod screen drive motor | Outside dust cover; direct drive is optional | |
| K rod screen flexible coupling | Drive to between pulleys | |
| K rod screen drive pulley | Drive transfer position | |
| K rod screening with removable dust cover | Area close to screen surface and vibrator | |
| Parts page Bolt (Bolt) | K Rod Deck Screen | |
| Parts page Rods or spacers (size per application) | K Rod Deck Screen | |
| Parts page Spring Cap | K Rod Deck Screen | K111-2 |
| Parts page Vibrator Cover | K Rod Deck Screen | K113-1 |
| Parts page Back Cover | K Rod Deck Screen | K116-4 |
| Parts page Sides | K Rod Deck Screen | K11-A12 |
| Parts page Feeding end bottom part (Head End-Bottom) | K Rod Deck Screen | K11-B11 |
| Parts page Head End-Top | K Rod Deck Screen | K11-C12 |
| Parts page Foot End-Bottom | K Rod Deck Screen | K11-D11 |
| Parts page Foot End-Top | K Rod Deck Screen | K11-E11 |
| Parts page Support Angle | K Rod Deck Screen | K11-G1 |
| Parts page Spring Seat | K Rod Deck Screen | K11-M1 |
| Parts page Corner Brace | K Rod Deck Screen | K11-S2 |
| Parts page Deck Bolt Rubber | K Rod Deck Screen | K12-1 |
| Parts page Washer | K Rod Deck Screen | K13-1 / K13-2 |
| Parts page Top Cover | K Rod Deck Screen | K14-110F |
| Parts page End Cover | K Rod Deck Screen | K14-210F |
| Parts page Rocker Rubber | K Rod Deck Screen | K15-1 |
| Parts page Deck Spring | K Rod Deck Screen | K16-1 |
| Parts page Rocker Spring | K Rod Deck Screen | K17-1 |
| Parts page Rocker | K Rod Deck Screen | K18-5 |
| Parts page Rocker Bolt Rubber | K Rod Deck Screen | K19-1 |
| Parts page Screen Sides (Deck Sides) | K Rod Deck Screen | K31-11 |
| Parts page Rod Top Rubber | K Rod Deck Screen | K312-3 |
| Parts page Vibrator Beam-Foot | K Rod Deck Screen | K32-9F |
| Parts page Vibrator Beam-Head | K Rod Deck Screen | K32-9H |
| Parts page Fastening hardware (name not fully specified) | K Rod Deck Screen | |
| Parts page Feeding end piece (Head End) | K Rod Deck Screen | K33-24 |
| Parts page Vibrator Guards | K Rod Deck Screen | K37-5 |
| Parts page Cross Bar Foot | K Rod Deck Screen | K3A-2F |
| Parts page Cross Bar Head | K Rod Deck Screen | K3A-2H |
| Parts page Cross Bar Between | K Rod Deck Screen | K3B-6 |
| Parts page Foot End | K Rod Deck Screen | K3D-7 |
| Parts page Top Bar | K Rod Deck Screen | K3E-1 / K3H-2 |
| Parts page Spacer Seat | K Rod Deck Screen | K3F-2 |
| Parts page Double Spacer Seat | K Rod Deck Screen | K3F-4 |
| Parts page Adjustment shim (Shim) | K Rod Deck Screen | K3G-1 / K3G-2 |
| K rod screen K exciter | Above the discharge end; the motor and drive are outside the cover | |
| Parts page Cheek Plate Set | K Rod Deck Screen | K36-108 |
| Component | Location | Part / drawing no. |
|---|---|---|
| K double rod screen parallel spring steel rod | Rod screen surface | |
| K double rod screen forming rubber spacer | Rod positioning/spacing | |
| K double rod screen center feeding distribution plate | 6ft feed opening center | |
| K double rod screen center screen layer structure | Center feeding area to bar screen surface support | |
| K double rod screen impact resistant rubber support | Screen layer support | |
| K double rod screen flange mounted direct drive motor | Two motors on the base, direct drive | |
| K double rod screening with removable dust cover | Area close to screen surface and vibrator; optional | |
| Parts page Sides | K-Twin Rod Deck | K11-A10 |
| Parts page Feeding end bottom part (Head End -Bottom) | K-Twin Rod Deck | K11-B10 |
| Parts page Feeding end top part (Head End -Top) | K-Twin Rod Deck | K11-C11 |
| Parts page Foot End-Bottom | K-Twin Rod Deck | K11-D10 |
| Parts page Foot End -Top | K-Twin Rod Deck | K11-E10 |
| Parts page Support Angle | K-Twin Rod Deck | K11-G6 |
| Parts page Spring Seat | K-Twin Rod Deck | K11-M4 |
| Parts page Corner Brace | K Rod Deck Screen | K11-S2 |
| Parts page Deck Bolt Rubber | K Rod Deck Screen | K12-1 |
| Parts page Washer Steel | K-Twin Rod Deck | K13-1 / K13-2 |
| Parts page Rocker Rubber | K Rod Deck Screen | K15-1 |
| Parts page Deck Spring | K Rod Deck Screen | K16-1 |
| Parts page Fastening hardware (name not fully specified) | K Rod Deck Screen | |
| Parts page Rocker | K Rod Deck Screen | K18-5 |
| Parts page Rocker Bolt Rubber | K Rod Deck Screen | K19-1 |
| Parts page Rocker Spring | K-Twin Rod Deck | J19-1 |
| Parts page Spring Cap | K Rod Deck Screen | K111-2 |
| Parts page Screen side plate (Deck Side) | K-Twin Rod Deck | K31-10 |
| Parts page Screen center piece (Deck Center) | K-Twin Rod Deck | K31C-10 |
| Parts page Cross Bar Head Arch | K-Twin Rod Deck | K3A-2H |
| Parts page Cross Bar Foot Arch | K-Twin Rod Deck | K3A-2F |
| Parts page middle horizontal bar (Cross Bar -Between) | K-Twin Rod Deck | K3B-5 |
| Parts page Discharge End | K-Twin Rod Deck | K3D-7 |
| Parts page Discharge Top Bar | K-Twin Rod Deck | K3E-1 |
| Parts page Spacer Seat | K-Twin Rod Deck | K3F-2 / K3G-1 |
| Parts page Double Spacer Seat | K-Twin Rod Deck | K3F-3 |
| Parts page Spacer Seat Shim | K-Twin Rod Deck | K3G-1 / K3G-2 |
| Parts page Top Bar -Between | K-Twin Rod Deck | K3H-1 |
| Parts page Fastening hardware (location stated; detailed name omitted) | K-Twin Rod Deck | |
| Parts page Vibrator Beam Head | K-Twin Rod Deck | K32-11H |
| Parts page Vibrator Beam Foot | K-Twin Rod Deck | K32-11F |
| Parts page Feeding end piece (Head End) | K-Twin Rod Deck | K33-8 |
| Parts page Vibrator Guard | K-Twin Rod Deck | K37-5 |
| Parts page Deck Center Connector | K-Twin Rod Deck | K323-1 |
| Parts page Center screen layer feed end nut guard (Head Nut Guard Ctr. Deck) | K-Twin Rod Deck | K324-1 |
| K double rod screen double K exciter | Both sides of the screen machine are arranged in series and connected to each other; two sets | |
| Parts page Cheek Plate Set | K-Twin Rod Deck | K36-11 |
The Screens Vibrating rod-deck screen covers 2 models: K Rod Deck Screen vibrating rod-deck screen, K Twin Rod Deck Screen twin rod-deck vibrating screen. Former and renamed designations are listed in the models table on this page.
The Screens Vibrating rod-deck screen is also documented under these designations: K Rod Deck Screen vibrating rod-deck screen, K Rod Deck Screen 3 x 6, K Rod Deck Screen 4 x 6, K Rod Deck Screen 4 x 8, K Rod Deck Screen 5 x 8, K48-3, K Twin Rod Deck Screen 6 x 8, K Twin Rod Deck Screen 6 x 10, K Twin Rod Deck Screen 6 x 12, K610-3.
The Screens Vibrating rod-deck screen is listed under the Symons brand as: Vibrating rod-deck screen. Period: 2004—2015. Status: Historical model.
83 components are recorded, including: K rod screen parallel spring steel rod, K rod screen forming rubber spacer, K rod screen rubber shaking seat, K rod screen spiral spring, K rod screen drive motor, K rod screen flexible coupling, K rod screen drive pulley, K rod screening with removable dust cover and more. The full list with locations is in the components table on this page.
Parts page Spring Cap: K111-2, Parts page Vibrator Cover: K113-1, Parts page Back Cover: K116-4, Parts page Sides: K11-A12, Parts page Feeding end bottom part (Head End-Bottom): K11-B11, Parts page Head End-Top: K11-C12, Parts page Foot End-Bottom: K11-D11, Parts page Foot End-Top: K11-E11, Parts page Support Angle: K11-G1, Parts page Spring Seat: K11-M1.
Model-specific components with their own page: K rod screen K exciter, Parts page Cheek Plate Set, K double rod screen double K exciter, Parts page Cheek Plate Set (4 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry