Which models does the MHC cover?
The MHC covers 4 models: BinEX, Bunker Discharge System, PlanEX, Truck Unloading Station. Former and renamed designations are listed in the models table on this page.
MHC
2026-10 · 4 models
LOESCHE
LOESCHEBrand
2026-10Period
Historical modelStatus
LOESCHE
Models and Historical Names in This Series
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| BinEX | 1600 / 2000 / 2500 / 3150 / 4000 / 5000 mm | 2026-10 | 3 |
| Bunker Discharge System | Block; Low profile; 2000 / 2500 / 3000 / 3500 / 4000 / 4400 / 5000 mm | 2026-10 | 3 |
| PlanEX | 6000 / 8000 / 10000 / 12000 mm | 2026-10 | 3 |
| Truck Unloading Station | 2026-10 | 3 |
LOESCHE
Numbered Components
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Inner cone | Central green free-spinning inner cone | BinEX |
| 2 | Discharge arm | Green rotating discharge arm beneath the cone | BinEX |
| 3 | Silo floor | Horizontal silo floor beneath the stored material | BinEX |
Other Components · 7 items
| Component |
|---|
| Discharge wheel |
| Discharge chute |
| Rotating platform |
| Trough plate |
| Travel wheel |
| Apron conveyor plate |
| Side wall |
LOESCHE
Components by Model
Models with the same components are grouped together; select a group to open its component table.
BinEX3 items
| No. | Component | Location |
|---|---|---|
| 1 | Inner cone | Above the central discharge opening of the silo |
| 2 | Discharge arm | Rotary discharge position at the bottom of the silo |
| 3 | Bin bottom | Floor plate beneath the silo |
Bunker Discharge System3 items
| No. | Component | Location |
|---|---|---|
| 2 | Discharge arm | Rotary discharge position at the bottom of the silo |
| Trough plate | Both sides of the central discharge trough at the bottom of the bin | |
| Travel wheel | Travel track inside the bin |
PlanEX3 items
| Component | Location |
|---|---|
| Discharge wheel | On the rotating platform beneath the cone inside the bin |
| Discharge chute | Above the central discharge opening |
| Slewing platform | Support between the discharge wheel and the drive unit |
Truck Unloading Station3 items
| Component | Location |
|---|---|
| Conveying apron pan | Bottom of the receiving zone and the lifting section toward the outlet |
| Side wall | Both sides of the receiving zone |
| Discharge chute | Above the central discharge opening |
Frequently asked questions
What other names or designations is the MHC known by?
The MHC is also documented under these designations: BinEX, 1600 / 2000 / 2500 / 3150 / 4000 / 5000 mm, Bunker Discharge System, Block, Low profile, PlanEX, 6000 / 8000 / 10000 / 12000 mm, Truck Unloading Station.
Which brand and type of equipment is the MHC?
The MHC is listed under the LOESCHE brand. Period: 2026-10. Status: Historical model.
Which components and wear parts are recorded for the MHC?
10 components are recorded, including: Discharge arm, Inner cone, Bin bottom, Trough plate, Travel wheel, Discharge wheel, Discharge chute, Slewing platform and more. The full list with locations is in the components table on this page.
Which model-specific components of the MHC have their own page?
Model-specific components with their own page: Discharge arm, Inner cone, Bin bottom, Trough plate, Travel wheel, Discharge wheel, Discharge chute, Slewing platform and more (10 in total).
How do I enquire about parts for the MHC?
Send us a drawing or sample and tell us the equipment model and part name.