Which models does the MHC cover?
The MHC covers 4 models: BinEX, Bunker Discharge System, PlanEX, Truck Unloading Station. Former and renamed designations are listed in the models table on this page.
2026-10 · 4 models


Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| BinEX | 1600 / 2000 / 2500 / 3150 / 4000 / 5000 mm | 2026-10 | 3 |
| Bunker Discharge System | Block; Low profile; 2000 / 2500 / 3000 / 3500 / 4000 / 4400 / 5000 mm | 2026-10 | 3 |
| PlanEX | 6000 / 8000 / 10000 / 12000 mm | 2026-10 | 3 |
| Truck Unloading Station | 2026-10 | 3 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Inner cone | Central green free-spinning inner cone | BinEX |
| 2 | Discharge arm | Green rotating discharge arm beneath the cone | BinEX |
| 3 | Silo floor | Horizontal silo floor beneath the stored material | BinEX |
| Component |
|---|
| Discharge wheel |
| Discharge chute |
| Rotating platform |
| Trough plate |
| Travel wheel |
| Apron conveyor plate |
| Side wall |
Models with the same components are grouped together; select a group to open its component table.
| No. | Component | Location |
|---|---|---|
| 1 | Inner cone | Above the central discharge opening of the silo |
| 2 | Discharge arm | Rotary discharge position at the bottom of the silo |
| 3 | Bin bottom | Floor plate beneath the silo |
| No. | Component | Location |
|---|---|---|
| 2 | Discharge arm | Rotary discharge position at the bottom of the silo |
| Trough plate | Both sides of the central discharge trough at the bottom of the bin | |
| Travel wheel | Travel track inside the bin |
| Component | Location |
|---|---|
| Discharge wheel | On the rotating platform beneath the cone inside the bin |
| Discharge chute | Above the central discharge opening |
| Slewing platform | Support between the discharge wheel and the drive unit |
| Component | Location |
|---|---|
| Conveying apron pan | Bottom of the receiving zone and the lifting section toward the outlet |
| Side wall | Both sides of the receiving zone |
| Discharge chute | Above the central discharge opening |
The MHC covers 4 models: BinEX, Bunker Discharge System, PlanEX, Truck Unloading Station. Former and renamed designations are listed in the models table on this page.
The MHC is also documented under these designations: BinEX, 1600 / 2000 / 2500 / 3150 / 4000 / 5000 mm, Bunker Discharge System, Block, Low profile, PlanEX, 6000 / 8000 / 10000 / 12000 mm, Truck Unloading Station.
The MHC is listed under the LOESCHE brand. Period: 2026-10. Status: Historical model.
10 components are recorded, including: Discharge arm, Inner cone, Bin bottom, Trough plate, Travel wheel, Discharge wheel, Discharge chute, Slewing platform and more. The full list with locations is in the components table on this page.
Model-specific components with their own page: Discharge arm, Inner cone, Bin bottom, Trough plate, Travel wheel, Discharge wheel, Discharge chute, Slewing platform and more (10 in total).
Envoyez-nous un plan ou un échantillon et indiquez le modèle d'équipement et le nom de la pièce.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Ou contactez-nous directement : +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to drawing, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
Veuillez fournir la marque de l’équipement, le modèle complet et le numéro de série, le nom de la pièce, sa référence ou le numéro du plan, l’indice de révision du plan, la quantité, les exigences relatives au matériau et les conditions de service. Si ces identifiants ne sont pas disponibles, envoyez des photographies et les dimensions principales.
Submit an Enquiry