Rubber-tyred underground haulage vehicle · 2014-09 · 1 model
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Kopeysk V17K rubber-tyred underground haulage vehicle | Kopeysk Transport vehicle В17К-01; Kopeysk Transport vehicle В17К-02; В17К; В17К-01; В17К-02 | 2014-09 | 17 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Electric wheels | Visible near-side wheels of four-wheel variant | В17К-01 |
| 2 | Removable lifting body | Upper vehicle body | В17К-01 |
| 3 | Operator station | Side of central vehicle body | В17К-01 |
| Component |
|---|
| Travel motor |
| Frequency converter |
| Vehicle control system |
| Camera |
| V17K detachable body (six-wheel version) |
| V17K two-speed scraper conveyor (six-wheel version) |
| V17K six-wheel traveling assembly |
| V17K cable reel (six-wheel version) |
| V17K01 four frequency converter |
| V17K02 four independent inverters |
| V17K02 DAMEL drive motor |
| V17K01 two-speed scraper conveyor drive |
| V17K02 variable frequency scraper conveyor drive |
| V17K02 dual camera and display |
| V17K02 monitoring system |
Models with the same components are grouped together; select a group to open its component table.
| No. | Component | Location |
|---|---|---|
| 1 | V17K01/02 four electric wheels | Four-wheel drive and steering |
| 2 | V17K01/02 detachable lifting body | Unloading lift 1.8m original text, not divided into cylinders/valves |
| Travel motor | Two-axis full-drive traveling system | |
| Frequency converter | Traveling electrical control | |
| Vehicle control system | Transport vehicle control | |
| Camera | Vehicle vision monitoring, two units | |
| V17K detachable body (six-wheel version) | Underground transportation main body | |
| V17K two-speed scraper conveyor (six-wheel version) | Unloading from the bottom of the car body | |
| V17K six-wheel traveling assembly | Four drive electric wheels, the other two steering wheels | |
| V17K cable reel (six-wheel version) | Capacity 220m is the cable accommodation length | |
| V17K01 four frequency converter | ASK original supplier brand; do not record supplier number | |
| V17K02 four independent inverters | For DAMEL motor, version range | |
| V17K02 DAMEL drive motor | 02 version, not the same brand as 01 | |
| V17K01 two-speed scraper conveyor drive | Bottom scraper with two fixed speeds | |
| V17K02 variable frequency scraper conveyor drive | 02 adjustable fixed speed, does not replace 01 structure | |
| V17K02 dual camera and display | 02Additional video system | |
| V17K02 monitoring system | The additional systems listed are not standard on all old machines. |
The Wheeled underground self-propelled transport vehicle is also documented under these designations: Kopeysk Transport vehicle В17К-01, Kopeysk Transport vehicle В17К-02, В17К, В17К-01, В17К-02.
The Wheeled underground self-propelled transport vehicle is listed under the Kopeysk brand as: Rubber-tyred underground haulage vehicle. Period: 2014-09. Status: Historical model.
17 components are recorded, including: Travel motor, Frequency converter, Vehicle control system, Camera, V17K detachable body (six-wheel version), V17K two-speed scraper conveyor (six-wheel version), V17K six-wheel traveling assembly, V17K cable reel (six-wheel version) and more. The full list with locations is in the components table on this page.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry