Underground loader / drill-loader (base, U and B configurations) · 2011 · 2 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Kopeysk 1PNB2 underground loader / drill-loader (base, u and b configurations) | Копейск Underground loader 1ПНБ2У; Kopeysk Underground loader 1ПНБ2; Kopeysk Underground loader 1ПНБ2У; Копейск Drill-loader 1ПНБ2Б; Kopeysk 1ПНБ2; Kopeysk 1ПНБ2У; Kopeysk 1ПНБ2Б | 2011 | 3 |
| Kopeysk 2PNB2 underground loader / drill-loader (base, u and b configurations) | Копейск Underground loader 2ПНБ2; Копейск Underground loader 2ПНБ2У; Копейск Underground loader 2ПНБ2М; Копейск Drill-loader 2ПНБ2Б; Kopeysk 2ПНБ2; Kopeysk 2ПНБ2У; Kopeysk 2ПНБ2Б | 2011 | 3 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Gathering arms | On front loading apron | 2ПНБ2М |
| 1 | Mounted drill assembly | Long-guide drill above front chassis | 1ПНБ2Б |
| 2 | Crawler running gear | Beneath the body | 2ПНБ2М |
| 2 | Crawler running gear | Beneath the body | 1ПНБ2Б |
| 3 | Discharge conveyor | Inclined rear conveyor above body | 2ПНБ2М |
| 3 | Gathering apron | Front loading entrance | 1ПНБ2Б |
| Component |
|---|
| 1ПНБ2U safety winch (available by agreement) |
| 1ПНБ2B replaceable electric drill |
| 1ПНБ2B replaceable pneumatic drilling rig |
| 2ПНБ2U safety winch (available by agreement) |
| 2ПНБ2B replaceable electric drill |
| 2ПНБ2B replaceable pneumatic drilling rig |
Models with the same components are grouped together; select a group to open its component table.
| Component | Location |
|---|---|
| 1ПНБ2U safety winch (available by agreement) | U ramp safety package; allows users to install it after the installation, does not meet the basic/B standard configuration |
| 1ПНБ2B replaceable electric drill | B drilling configuration, used in the original f6-8 range |
| 1ПНБ2B replaceable pneumatic drilling rig | B drilling configuration, used in the original f8-12 range; the two drilling rigs do not drill two holes at the same time |
| Component | Location |
|---|---|
| 2ПНБ2U safety winch (available by agreement) | U ramp safety package; allows users to install it after the installation, does not meet the basic/B standard configuration |
| 2ПНБ2B replaceable electric drill | B drilling configuration, used in the original f6-8 range |
| 2ПНБ2B replaceable pneumatic drilling rig | B drilling configuration, used in the original f8-12 range; the two drilling rigs do not drill two holes at the same time |
The Underground loader / drill-loader covers 2 models: Kopeysk 1PNB2 underground loader / drill-loader, Kopeysk 2PNB2 underground loader / drill-loader. Former and renamed designations are listed in the models table on this page.
The Underground loader / drill-loader is also documented under these designations: Kopeysk 1PNB2 underground loader / drill-loader, Копейск Underground loader 1ПНБ2У, Kopeysk Underground loader 1ПНБ2, Kopeysk Underground loader 1ПНБ2У, Копейск Drill-loader 1ПНБ2Б, Kopeysk 1ПНБ2, Kopeysk 1ПНБ2У, Kopeysk 1ПНБ2Б, Kopeysk 2PNB2 underground loader / drill-loader, Копейск Underground loader 2ПНБ2, Копейск Underground loader 2ПНБ2У, Копейск Underground loader 2ПНБ2М, Копейск Drill-loader 2ПНБ2Б, Kopeysk 2ПНБ2.
The Underground loader / drill-loader is listed under the Kopeysk brand as: Underground loader / drill-loader (base, U and B configurations). Period: 2011. Status: Historical model.
6 components are recorded, including: 1ПНБ2U safety winch (available by agreement), 1ПНБ2B replaceable electric drill, 1ПНБ2B replaceable pneumatic drilling rig, 2ПНБ2U safety winch (available by agreement), 2ПНБ2B replaceable electric drill, 2ПНБ2B replaceable pneumatic drilling rig. The full list with locations is in the components table on this page.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry