Mining drilling rig · 2026-10-01 · 1 model
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Kopeysk UBSh mining drilling rig | УБШ210А; Kopeysk Mining Drill rig УБШ-210А; Kopeysk Mining Drill rig УБШ-500; УБШ-210А; УБШ-210А-02; УБШ 500 | 2026-10-01 | 16 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Drill assembly | Long-guide drill above front chassis | УБШ-210А |
| 2 | Drill manipulator | Support beneath the drill | УБШ-210А |
| 3 | Machine frame | Above the crawler undercarriage | УБШ-210А |
| 4 | Crawler chain | Visible crawler chain beneath chassis | УБШ-210А |
| Component |
|---|
| UBSH210A electric rotary drill bit |
| UBSH210A rack hydraulic cylinder |
| UBSH210A rotary gear |
| UBSH210A travel reducer and motor |
| UBSH210A balancing mechanism |
| UBSH210A umbrella-shaped water nozzle |
| UBSH500 crawler chassis (2011 design) |
| UBSH500 rotary impact drill unit (2011 design) |
| UBSH500 telescopic manipulator (2011 design) |
| UBSH500 HKS rotary hydraulic cylinder (2011 design) |
| UBSH500 air treatment system (2011 design) |
| UBSH500 multi-stage centrifugal water pump (2011 design) |
Models with the same components are grouped together; select a group to open its component table.
| No. | Component | Location |
|---|---|---|
| 1 | UBSH210A drilling rig assembly | Single drilling rig, no double arm version |
| 2 | UBSH210A control arm | Drilling rig support |
| 3 | UBSH210A frame | Traveling mechanism support |
| 4 | UBSH210A crawler chain | Walking mechanism |
| UBSH210A electric rotary drill bit | Single drilling rig rotary head | |
| UBSH210A rack hydraulic cylinder | Drilling rig relative arm horizontal rotation drive | |
| UBSH210A rotary gear | Rigidly connected support, matched with rack cylinder | |
| UBSH210A travel reducer and motor | Walking mechanism; driver and 1PNB2 uniformly declare this range only | |
| UBSH210A balancing mechanism | ||
| UBSH210A umbrella-shaped water nozzle | Orifice dust suppression, original text 0.5-1.0MPa is not full hydraulic pressure | |
| UBSH500 crawler chassis (2011 design) | Only 500A design, not 210A | |
| UBSH500 rotary impact drill unit (2011 design) | The original text of the Finnish manufacturer is written in Russian as Дофор; the Latin spelling is not stated and the brand will not be changed to guess. | |
| UBSH500 telescopic manipulator (2011 design) | The upper horizontal hole can be drilled to a height of 5m | |
| UBSH500 HKS rotary hydraulic cylinder (2011 design) | Rotary hydraulic cylinder used in telescopic manipulators | |
| UBSH500 air treatment system (2011 design) | Based on the components used in the Atlas Copco drilling rig and some Russian-made equipment, not a complete Atlas original supply certificate | |
| UBSH500 multi-stage centrifugal water pump (2011 design) | SPERONI water pump pressurizes the borehole flushing system; the supporting pump product code is not transcribed |
The Mining Drill rig is also documented under these designations: Kopeysk UBSh mining drilling rig, УБШ210А, Kopeysk Mining Drill rig УБШ-210А, Kopeysk Mining Drill rig УБШ-500, УБШ-210А-02, УБШ 500.
The Mining Drill rig is listed under the Kopeysk brand as: Mining drilling rig. Period: 2026-10-01. Status: Listed in the manufacturer's current catalogue.
16 components are recorded, including: UBSH210A electric rotary drill bit, UBSH210A drilling rig assembly, UBSH210A control arm, UBSH210A rack hydraulic cylinder, UBSH210A rotary gear, UBSH210A travel reducer and motor, UBSH210A frame, UBSH210A balancing mechanism and more. The full list with locations is in the components table on this page.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry