2026 · 5 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Period | Components |
|---|---|---|
| ADS 24 × 36 | 2026 | 5 |
| ADS 24 × 48 | 2026 | 5 |
| ADS 24 × 60 | 2026 | 5 |
| ADS 24 × 72 | 2026 | 5 |
| ADS 24 × 84 | 2026 | 5 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Separation chamber | Vertical separation chamber at the left | ADS Air Density Separator |
| 2 | Infeed airlock | Infeed airlock upstream of the chamber | ADS Air Density Separator |
| 3 | Cyclone | Cyclone in the upper conveying circuit | ADS Air Density Separator |
| 4 | Centrifugal blower | Air-moving fan at the lower right | ADS Air Density Separator |
| Component |
|---|
| Airflow control damper |
Models with the same components are grouped together; select a group to open its component table.
Models: ADS 24 × 36, ADS 24 × 48, ADS 24 × 60, ADS 24 × 72, ADS 24 × 84
| No. | Component | Location |
|---|---|---|
| 1 | Separation chamber | Zone where the airflow meets the material |
| 2 | Feed airlock | Above the separation chamber |
| 3 | Cyclone separator | Pneumatic conveying end for qualified material |
| 4 | Centrifugal blower | Separation airflow drive position |
| Air volume control valve | Fan and circulating air path |
The Air Density Separator ADS Air Density Separator covers 5 models: ADS 24 × 36, ADS 24 × 48, ADS 24 × 60, ADS 24 × 72, ADS 24 × 84. Former and renamed designations are listed in the models table on this page.
The Air Density Separator ADS Air Density Separator is also documented under these designations: ADS 24 × 36, ADS 24 × 48, ADS 24 × 60, ADS 24 × 72, ADS 24 × 84.
The Air Density Separator ADS Air Density Separator is listed under the Jeffrey Rader brand. Period: 2026. Status: Historical model.
5 components are recorded, including: Separation chamber, Feed airlock, Cyclone separator, Centrifugal blower, Air volume control valve. The full list with locations is in the components table on this page.
Model-specific components with their own page: Separation chamber, Feed airlock, Cyclone separator, Centrifugal blower, Air volume control valve (5 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry