Which models does the MS cover?
The MS covers 3 models: 5142-32MS, 5143-32MS, 6203-32MS. Former and renamed designations are listed in the models table on this page.
2018 · 3 models


The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Discharge lip liner | Metal discharge lip across the discharge end | MS |
| 2 | Screen support springs / buffers | Black elastomer supports between the screenbox and base | MS |
| 3 | Drive motor | Blue drive motor at the rear side of the screenbox | MS |
| 4 | Screenbox side plate | Stiffened side plate on the right side of the screenbox | MS |
| Component |
|---|
| Screen media |
| Feed box liner |
| Spherical roller bearings |
| Screen tension rails |
| Drive belts |
| Exciter shaft assembly |
Models with the same components are grouped together; select a group to open its component table.
Models: 5142-32MS, 5143-32MS, 6203-32MS
| No. | Component | Location |
|---|---|---|
| 1 | Model-specific component | |
| 2 | Support Spring / Buffer | Between the screen box and the base frame |
| Screen Mesh / Wire Mesh | ||
| Feed Box Liner | ||
| Model-specific component | ||
| Tension Rail / Wedge | ||
| Drive belt | ||
| Exciter shaft assembly | Exciter mechanism in the middle of the screen box |
The MS covers 3 models: 5142-32MS, 5143-32MS, 6203-32MS. Former and renamed designations are listed in the models table on this page.
The MS is also documented under these designations: 5142-32MS, 5143-32MS, 6203-32MS.
The MS is listed under the JCI brand. Period: 2018. Status: Historical model.
8 components are recorded, including: Screen Mesh / Wire Mesh, Feed Box Liner, Support Spring / Buffer, Tension Rail / Wedge, Drive belt, Exciter shaft assembly and more. The full list with locations is in the components table on this page.
Model-specific components with their own page: Exciter shaft assembly (1 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the equipment brand, complete model and serial number, part name, part number or drawing number, drawing revision, quantity, material requirements and duty. If identifiers are unavailable, send photographs and key dimensions.
Submit an Enquiry