Track cone crushing plant · 2026 · 3 models
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Feed conveyor belt | Inclined feed conveyor below the hopper leading into the cone crusher | FT200OC (pictured body marked FT200; open-circuit configuration) |
| 2 | Track assembly | Right track assembly below the chassis | FT200OC (pictured body marked FT200; open-circuit configuration) |
| 3 | Feed hopper | Feed hopper above the rear of the machine | FT200OC (pictured body marked FT200; open-circuit configuration) |
| 4 | Discharge conveyor belt | Inclined main discharge conveyor at the front | FT200OC (pictured body marked FT200; open-circuit configuration) |
| Component |
|---|
| Mantle |
| Bowl liner / concave |
| Main frame liner |
| Roller bearings |
| V-seat liner |
| Tramp relief cylinders |
| Lubrication assembly |
Models with the same components are grouped together; select a group to open its component table.
Models: FT200CC, FT200OC, FT300OC
| No. | Component | Location |
|---|---|---|
| 1 | Conveyor Belt | |
| Mantle / Head Liner | ||
| Bowl Liner / Concave | ||
| Main Frame liner | ||
| Roller bearing | Support and slewing mechanism of the cone crusher | |
| V -shaped seat liner | Joint of the upper bowl seat support | |
| Tramp iron release cylinder | Around the upper release assembly | |
| Lubrication assembly | External oil supply circuit of the machine |
The Mobile Kodiak Cone Plants Track cone crushing plant covers 3 models: FT200CC, FT200OC, FT300OC. Former and renamed designations are listed in the models table on this page.
The Mobile Kodiak Cone Plants Track cone crushing plant is also documented under these designations: FT200CC, FT200OC, Frontier FT200, FT300OC.
The Mobile Kodiak Cone Plants Track cone crushing plant is listed under the JCI brand as: Track cone crushing plant. Period: 2026. Status: Historical model.
8 components are recorded, including: Mantle / Head Liner, Bowl Liner / Concave, Main Frame liner, Conveyor Belt, Roller bearing, V -shaped seat liner, Tramp iron release cylinder, Lubrication assembly. The full list with locations is in the components table on this page.
Model-specific components with their own page: Roller bearing, V -shaped seat liner, Tramp iron release cylinder, Lubrication assembly (4 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry