Mobile screening equipment · 2007 · 4 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Fintec 540 mobile screening equipment | Fintec 540; Fintec540 | 12 | |
| Fintec 542 mobile screening equipment | Fintec Mobile screening plant 542; Fintec 542 | 2007 | 14 |
| Fintec 570 mobile screening equipment | Fintec Mobile screening plant 570; Fintec 570 | 2007 | 20 |
| Fintec 640 mobile screening equipment | Fintec Mobile screening plant 640; Fintec 640 | 2007 | 4 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Feed hopper | Hopper at the feed end of the 542 | 542 |
| 2 | Double-deck screen assembly | Inclined screenbox in the side elevation | 542 |
| 3 | Conveyor belt | Discharge conveyor belts of the 542 | 542 |
| 4 | Crawler track shoes | Crawler tracks below the side elevation | 542 |
| Component |
|---|
| Engine (2007 manufacturer advertising) |
| Pre-separator (2007 manufacturer advertisement) |
| Belt feeder (auction item) |
| Hydraulic upgradeable screen (auction item) |
| Feed conveyor belt (auction item) |
| Left discharging conveyor belt (auction item) |
| Discharging conveyor belt on the right side (auction item) |
| End discharge conveyor belt (auction item) |
| Wired remote control device (auction item) |
| Diesel engine (auction item) |
| Hydraulic leveling system (auction item) |
| Three-tooth track shoe (auction item) |
| Screen |
| Hopper worn liner |
| Tail roller |
| Drive roller |
| Conveyor belt side barrier rubber |
| Internal V-shaped cleaner |
| Belt Cleaner |
| Beating roller |
| Screen layer |
| Screen box wedge tensioning mechanism |
| Replaceable screen surface |
| Grille strips |
| Side hopper liner |
| 2008 Don Rouyn 3/8 inch screen |
| Don Rouyn screen coarse material external conveying link |
| Screen box bearing |
| 540 double layer screen box |
| 540 remote control tilting and picking grille |
| 540 Deutz water-cooled diesel engine |
| 540 hopper |
| 540 inclined belt feeder |
| 540 main conveyor belt |
| 540 side conveyor belt |
| 540 tail conveyor belt |
Models with the same components are grouped together; select a group to open its component table.
| No. | Component | Location | Part / drawing no. |
|---|---|---|---|
| 1 | Hopper (2007 manufacturer advertisement) | Feed end; 8m³ | |
| 3 | Conveyor belt | Feeder/Main/Fine Material/Side Conveyor | |
| 4 | Track shoes | Walking device | |
| Screen | Double-layer screen box face | ||
| Hopper worn liner | Bypass feeding area | ||
| Tail roller | End of each conveyor | ||
| Drive roller | Drive end of each conveyor | ||
| Conveyor belt side barrier rubber | Side edges of each conveyor | 570-25-13-001 / 570-25-40-001 | |
| Internal V-shaped cleaner | Tail roller protection position | ||
| Belt Cleaner | Feeding, main and fine material conveyors | 20-55-0150 / 20-55-0930 / 20-55-1000 / 570-25-05-001 | |
| Beating roller | Side conveyor | ||
| Screen layer | Upper and lower layers of screen box | ||
| Screen box wedge tensioning mechanism | Upper high impact zone | 540-10-57 / 570-10-08 | |
| Replaceable screen surface | Screen layer selection | ||
| Grille strips | Hydraulic flip grille | ||
| Side hopper liner | Optional side conveyor entrance for medium and large materials | ||
| Engine (2007 manufacturer advertising) | Machine power; CAT | ||
| Pre-separator (2007 manufacturer advertisement) | Before crushing/screening | ||
| 2008 Don Rouyn 3/8 inch screen | The 570 on-site screening face | ||
| Don Rouyn screen coarse material external conveying link | 570 coarse materials are sent to 1080; external process matching |
| No. | Component | Location | Part / drawing no. |
|---|---|---|---|
| 1 | Hopper (2007 manufacturer advertisement) | Feed end; 8m³ | |
| 2 | Double-layer screen assembly (auction item) | Screening area 3650×1500mm; screen aperture cannot be calculated from the area | |
| Engine (2007 manufacturer advertising) | Machine power; CAT | ||
| Pre-separator (2007 manufacturer advertisement) | Before crushing/screening | ||
| Belt feeder (auction item) | Feeding end 1200×4100mm; the size of the table follows the feeder | ||
| Hydraulic upgradeable screen (auction item) | Above the feeder, the specific size of the grid screen is not in separate rows | ||
| Feed conveyor belt (auction item) | Width 1050mm | 20-02-0542 | |
| Left discharging conveyor belt (auction item) | Width 650mm | ||
| Discharging conveyor belt on the right side (auction item) | Width 650mm | ||
| End discharge conveyor belt (auction item) | Width 1200mm | ||
| Wired remote control device (auction item) | Operation control terminal | ||
| Diesel engine (auction item) | Cat3054C four-cylinder 74.5kW | ||
| Hydraulic leveling system (auction item) | Whole machine leveling, parts disassembly not listed | ||
| Three-tooth track shoe (auction item) | Crawler running mechanism, width 500mm |
| Component | Location |
|---|---|
| 540 double layer screen box | 12ft×5ft screening body; not a single piece of screen frame/side lining |
| 540 remote control tilting and picking grille | Original watch 12ft Remote Control Tipping Reject Grid |
| 540 Deutz water-cooled diesel engine | 72kW/96Hp; the specific engine model is not specified |
| 540 hopper | 7m³ capacity; liner is not named, do not borrow the box lining page |
| 540 inclined belt feeder | 1050mm three-layer belt, variable speed; not feed liner |
| 540 main conveyor belt | 1050mm three-layer belt; the old website does not have an accurate general page for this type, and does not use the cold milling conveyor belt page. |
| 540 side conveyor belt | 650mm herringbone belt, variable speed; the original text does not say three layers, does not cover the main belt |
| 540 tail conveyor belt | 1200mm three-layer tape |
| 540 double-layer vibration grille (original list) | 12ft double deck; whether each unit is installed without loading and not combined with the picking grille |
| 540 single-shaft shredding device (original list) | Single Shaft; whether it is optional/specific application configuration is not documented, and the knife type is not customized. |
| 540 wheeled dual-axle chassis (wheeled version) | Wheel Version Twin Axle Undercarriage; not for original track version |
| 540 crawler chassis (original configuration) | The original page photo/dimensional drawing clearly shows the track support; the chain link/drive parts list is not deduced from the appearance. |
| No. | Component | Location | Part / drawing no. |
|---|---|---|---|
| 1 | Hopper (2007 manufacturer advertisement) | Feed end; 8m³ | |
| Screen box bearing | Double-layer screen box vibration support | 11-00-0322 | |
| Engine (2007 manufacturer advertising) | Machine power; CAT | ||
| Pre-separator (2007 manufacturer advertisement) | Before crushing/screening |
The Mobile screening plant covers 4 models: Fintec 540 mobile screening equipment, Fintec 542 mobile screening equipment, Fintec 570 mobile screening equipment, Fintec 640 mobile screening equipment. Former and renamed designations are listed in the models table on this page.
The Mobile screening plant is also documented under these designations: Fintec 540 mobile screening equipment, Fintec 540, Fintec540, Fintec 542 mobile screening equipment, Fintec Mobile screening plant 542, Fintec 542, Fintec 570 mobile screening equipment, Fintec Mobile screening plant 570, Fintec 570, Fintec 640 mobile screening equipment, Fintec Mobile screening plant 640, Fintec 640.
The Mobile screening plant is listed under the Fintec brand as: Mobile screening equipment. Period: 2007. Status: Historical model.
44 components are recorded, including: 540 double layer screen box, 540 remote control tilting and picking grille, 540 Deutz water-cooled diesel engine, 540 hopper, 540 inclined belt feeder, 540 main conveyor belt, 540 side conveyor belt, 540 tail conveyor belt and more. The full list with locations is in the components table on this page.
Feed conveyor belt (auction item): 20-02-0542, Conveyor belt side barrier rubber: 570-25-13-001 / 570-25-40-001, Belt Cleaner: 20-55-0150 / 20-55-0930 / 20-55-1000 / 570-25-05-001, Screen box wedge tensioning mechanism: 540-10-57 / 570-10-08, Screen box bearing: 11-00-0322.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry