What other names or designations is the Mobile Jaw crusher known by?
The Mobile Jaw crusher is also documented under these designations: Fintec 1107 Mobile Jaw Crusher, Fintec Mobile Jaw crusher 1107, Fintec 1107.
Mobile Jaw crusher
Mobile jaw crusher · 2007 · 1 model
Fintec
FintecBrand
Mobile jaw crusherEquipment type
2007Period
Historical modelStatus
Fintec
Models and Historical Names in This Series
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Fintec 1107 Mobile Jaw Crusher | Fintec Mobile Jaw crusher 1107; Fintec 1107 | 2007 | 91 |
Fintec
Numbered Components
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Feed hopper | Feed end of the machine | 1107 |
| 2 | Jaw crusher assembly | Between the feeder and the main conveyor | 1107 |
| 3 | Main conveyor | Discharge conveyor on the left | 1107 |
| 4 | Crawler track assembly | Crawler tracks below the machine | 1107 |
Other Components · 40 items
| Component |
|---|
| Engine (2007 manufacturer advertising) |
| Hopper (2007 manufacturer advertisement) |
| Pre-separator (2007 manufacturer advertisement) |
| Crushing unit (2007 manufacturer advertisement) |
| Scrap conveyor belt (2007 manufacturer advertisement) |
| Welded integral jaw crusher frame |
| Jaw crusher V-belt drive |
| CSS Adjustment Wedge — Hydraulic outlet adjustment wedge |
| Material level monitoring sensor and control |
| Spring mounted vibrating feeder and support spring |
| Dual-shaft oil lubricated grid screen mechanism of feeder |
| Hopper folding side/rear height plate |
| Main conveyor belt |
| Side soil conveyor belt (optional) |
| Main/side conveyor head and tail bearings |
| Crawler track and integrated hydraulic travel motor |
| Diesel tank and hydraulic oil tank |
| Deutz or Caterpillar engine (configuration branch) |
| Main control box and handheld controller |
| Toolbox (tools not included) |
| Jaw plate (fixed/movable parts to be original drawing) |
| Toggle Plate |
| Toggle Seat |
| Jaw crusher bearings and transmission bearings |
| Conveyor support/return roller |
| Skirt and scraper rubber |
| Feeder liner |
| Hydraulic oil return filter |
| Fuel tank breather |
| Fuel tank access cover, gasket and oil level indicator |
| Oil suction filter (jaw crusher pump/auxiliary pump branch) |
| Fuel tank drain plug |
| Magnetic separator frame |
| Magnet |
| Hydraulic drive motor |
| Drive and tail roller |
| Bearing |
| Bearing cover |
| Bearing back plate |
| Bearing tensioning plate |
Fintec
Components by Model
Models with the same components are grouped together; select a group to open its component table.
Fintec 1107 Mobile Jaw Crusher91 items
| Component | Location | Part / drawing no. |
|---|---|---|
| Engine (2007 manufacturer advertising) | Machine power; CAT or DEUTZ | |
| Hopper (2007 manufacturer advertisement) | Feed end; 7m³ | |
| Pre-separator (2007 manufacturer advertisement) | Before crushing/screening | |
| Crushing unit (2007 manufacturer advertisement) | Crushing area of the whole machine; J11 | |
| Scrap conveyor belt (2007 manufacturer advertisement) | Original text Meddő kihordó szalag; specific export not marked | |
| Welded integral jaw crusher frame | Technical Chapter 2 | |
| Jaw crusher V-belt drive | Technical Chapter 5; Hydraulic motor to jaw crusher | 13-01-2500 |
| CSS Adjustment Wedge — Hydraulic outlet adjustment wedge | Technical Chapter 2/5 | |
| Material level monitoring sensor and control | Technical Chapter 2 and Familiarization Chapter 11; Automatic start and stop of feeder | 14-04-1116 |
| Spring mounted vibrating feeder and support spring | Technical Chapter 5; Feeding Area | |
| Dual-shaft oil lubricated grid screen mechanism of feeder | Technical Chapter 5; Grid Screening Section | |
| Hopper folding side/rear height plate | Technical Chapter 5; 6m3 hopper | |
| Main conveyor belt | Technical Chapter 5; 1000mm main belt | |
| Side soil conveyor belt (optional) | Technical Chapter 2/6; 650mm side strap | |
| Main/side conveyor head and tail bearings | Technical Chapter 5/6 and Maintenance Chapter 24 | |
| Crawler track and integrated hydraulic travel motor | Technical Chapter 5; 500mm track | |
| Diesel tank and hydraulic oil tank | Technical Chapter 6; Power Unit | |
| Deutz or Caterpillar engine (configuration branch) | Technical Chapter 6; Deutz V6 BF6M1015C or C9 | |
| Main control box and handheld controller | Technical Chapter 4, Familiar Chapter 2/10 | 14-04-1112 / 14-04-1124 / 14-04-1162 |
| Toolbox (tools not included) | Technical Chapter 4; Opposite side of the control box | |
| Jaw plate (fixed/movable parts to be original drawing) | Maintenance Chapter 4; Tightening/Wear Inspection | 25-11-0075 / 400.1101.001 / 25-11-0057 / 400.0738.001 |
| Toggle Plate | Maintenance Chapter 4; Position and Wear Inspection | 25-11-0009 / 400.0549.001 / 25-11-0048 / 400.0549.002 |
| Toggle Seat | Maintenance Chapter 4; Position and Wear Inspection | 25-11-0006 / 400.0548.001 |
| Jaw crusher bearings and transmission bearings | Maintenance Chapter 4/24; Different Bearing Groups | 11-26-2216 |
| Conveyor support/return roller | Maintenance chapter 4 and related conveyance chapter | 19-01-0370 / 19-01-0780 / 19-04-0750 / 19-04-1100 |
| Skirt and scraper rubber | Maintenance Chapter 4; Conveyor belt contact point | 1107-25-04-010 / 1107-25-04-011 / 1107-10-10-009 / 1107-10-26-002 |
| Feeder liner | Maintenance Chapter 4; Feeding Area | |
| Hydraulic oil return filter | Familiarization Chapter 12 and Maintenance Chapter 9/11; Fuel Tank | 10-21-0008 |
| Fuel tank breather | Familiarity Chapter 12 and Maintenance Chapter 9/10 | 10-22-4006 |
| Fuel tank access cover, gasket and oil level indicator | Familiarization Chapter 12 and Maintenance Chapter 10 | |
| Oil suction filter (jaw crusher pump/auxiliary pump branch) | Familiarity Chapter 12; Different suction branches | 10-21-0003 / 10-21-0007 |
| Fuel tank drain plug | Familiarization Chapter 12 and Maintenance Chapter 10 | |
| Magnetic separator frame | Optional Eriez self-cleaning magnetic separator interior; two versions combined | |
| Magnet | Optional Eriez self-cleaning magnetic separator interior; two versions combined | 12-25-0102 / 12-25-0127 |
| Hydraulic drive motor | Optional Eriez self-cleaning magnetic separator interior; two versions combined | 12-25-0110 |
| Drive and tail roller | Optional Eriez self-cleaning magnetic separator interior; two versions combined | 12-25-0107 / 12-25-0108 |
| Bearing | Optional Eriez self-cleaning magnetic separator interior; two versions combined | 11-25-0208 |
| Bearing cover | Optional Eriez self-cleaning magnetic separator interior; two versions combined | 11-25-3208 |
| Bearing back plate | Optional Eriez self-cleaning magnetic separator interior; two versions combined | 12-25-0117 |
| Bearing tensioning plate | Optional Eriez self-cleaning magnetic separator interior; two versions combined | 12-25-0118 |
| Bearing spacer plate | Optional Eriez self-cleaning magnetic separator interior; two versions combined | 12-25-0119 |
| Left/right side panel | Optional Eriez self-cleaning magnetic separator interior; two versions combined | 12-25-0115 / 12-25-0116 / 12-25-0135 / 12-25-0136 |
| Magnetic separator belt | Optional Eriez self-cleaning magnetic separator interior; two versions combined | 12-25-0105 / 12-25-0130 |
| Eye nut | Optional Eriez self-cleaning magnetic separator interior; two versions combined | 12-65-0120 |
| coupling housing | Optional Eriez self-cleaning magnetic separator interior; two versions combined | 13-05-0130 |
| Motor mounting plate | Optional Eriez self-cleaning magnetic separator interior; two versions combined | 12-25-0112 |
| Motor/coupling guard | Optional Eriez self-cleaning magnetic separator interior; two versions combined | 12-25-0113 |
| Drum/motor taper sleeve | Optional Eriez self-cleaning magnetic separator interior; two versions combined | 13-04-7340 / 13-04-7332 |
| Rubber star coupling element | Optional Eriez self-cleaning magnetic separator interior; two versions combined | 13-05-1130 |
| Feeder hydraulic motor | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 10-25-2055 |
| Side conveyor hydraulic motor | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 10-25-0160 |
| Magnetic selection with hydraulic motor (optional) | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | |
| Main conveyor hydraulic motor | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 10-25-0630 |
| Closed loop pump (130cc) | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 10-24-1130 |
| Main circuit pump (130cc) | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 10-24-1131 |
| Hydraulic oil cooler | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | |
| Double control valve group | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 10-16-1012 |
| Triple control valve group | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 10-16-1013 |
| Main control valve | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 10-16-7001 |
| Check valve | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 10-16-6018 |
| Flow regulating valve | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | |
| Hopper height plate cylinder | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 10-28-0030 |
| Side belt folding cylinder | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 10-28-0034 |
| Main belt lifting cylinder | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 10-28-0032 |
| Hydraulic motor | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 10-25-1250 |
| Discharge wedge adjustment cylinder | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | |
| Toggle cylinder | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 25-11-0135 / 400.2382.001 |
| diverter valve | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 10-16-5260 |
| CSS solenoid valve block | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 10-16-4650 |
| Throttle valve | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 10-48-0035 |
| CSS sensor current collecting block | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 1107-15-47-001 |
| Pressure test point (aggregation of two positions) | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 10-23-5006 / 10-23-5009 |
| Pressure sensor | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 10-23-5114 / 10-23-5101 / 10-23-5102 / 10-23-5103 |
| Accumulator | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 10-16-2010 |
| Charge pressure filter | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 12-70-0362 |
| Explosion proof pipe insert | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 10-16-6002 |
| High-pressure filter assembly and filter element | 1107 hydraulic circuit; the specific location is according to the original name, the location of the 250cc motor cannot be guessed | 10-21-0320 / 10-21-0321 |
| Hydraulic adapter and rotary adapter | The multiple imperial specifications of the original table are aggregated into functional groups, and the IDs are not separated by specifications. | 10-01-1109 / 10-01-1209 / 10-01-2210 / 10-01-1110 |
| Hydraulic tee joint | The multiple imperial specifications of the original table are aggregated into functional groups, and the IDs are not separated by specifications. | 10-04-1109 / 10-04-1209 / 10-04-1224 / 10-04-1118 |
| Through-plate adapter | The multiple imperial specifications of the original table are aggregated into functional groups, and the IDs are not separated by specifications. | 10-03-1110 / 10-03-1114 / 10-03-1117 |
| Blocked | The multiple imperial specifications of the original table are aggregated into functional groups, and the IDs are not separated by specifications. | 10-09-0009 / 10-09-0014 / 10-09-0005 |
| Hydraulic O-ring | The multiple imperial specifications of the original table are aggregated into functional groups, and the IDs are not separated by specifications. | 10-24-0120 |
| Hydraulic ball valve | The multiple imperial specifications of the original table are aggregated into functional groups, and the IDs are not separated by specifications. | 10-16-0076 / 10-16-0052 |
| Don Rouyn jaw crusher to external conveyor link of screen machine | 1107 discharge is sent to 570; the conveyor brand/model is not listed in the article | |
| Hydraulic adjusting wedge mechanism | Adjustment part of jaw crusher outlet | |
| Main circuit hose collection | Parts Chapter 26 Hosekit Main Circuits | 10-29-7001 / 10-29-7002 / 10-29-7003 / 10-29-7004 |
| Closed drive circuit hose assembly | Parts Chapter 27 Closed Loop | 10-29-7060 / 10-29-7061 / 10-29-7062 / 10-29-7063 |
| CSS adjustment loop hose set | Parts Chapter 27 CSS Adjustment | 10-29-7070 / 10-29-7071 / 10-29-7072 / 10-29-7073 |
| Engine related hose collection | Parts Chapter 27 Engine | 10-29-7080 / 10-29-7081 / 10-29-7082 / 10-29-7083 |
| Main/side conveyor lubrication pipe assembly | Parts Chapter 27 Grease Kit | 10-29-7090 / 10-29-7091 / 10-29-7092 / 10-29-7093 |
| Flange fastener kit | Parts Chapter 29 Flange Bolt Kit | 10-24-0020 |
Frequently asked questions
Which brand and type of equipment is the Mobile Jaw crusher?
The Mobile Jaw crusher is listed under the Fintec brand as: Mobile jaw crusher. Period: 2007. Status: Historical model.
Which components and wear parts are recorded for the Mobile Jaw crusher?
91 components are recorded, including: Engine (2007 manufacturer advertising), Hopper (2007 manufacturer advertisement), Pre-separator (2007 manufacturer advertisement), Crushing unit (2007 manufacturer advertisement), Scrap conveyor belt (2007 manufacturer advertisement), Welded integral jaw crusher frame, Jaw crusher V-belt drive, CSS Adjustment Wedge and more. The full list with locations is in the components table on this page.
Which drawing or part numbers are listed for the Mobile Jaw crusher?
Jaw crusher V-belt drive: 13-01-2500, Material level monitoring sensor and control: 14-04-1116, Main control box and handheld controller: 14-04-1112 / 14-04-1124 / 14-04-1162, Jaw plate (fixed/movable parts to be original drawing): 25-11-0075 / 400.1101.001 / 25-11-0057 / 400.0738.001, Toggle Plate: 25-11-0009 / 400.0549.001 / 25-11-0048 / 400.0549.002, Toggle Seat: 25-11-0006 / 400.0548.001, Jaw crusher bearings and transmission bearings: 11-26-2216, Conveyor support/return roller: 19-01-0370 / 19-01-0780 / 19-04-0750 / 19-04-1100, Skirt and scraper rubber: 1107-25-04-010 / 1107-25-04-011 / 1107-10-10-009 / 1107-10-26-002, Hydraulic oil return filter: 10-21-0008.
Which model-specific components of the Mobile Jaw crusher have their own page?
Model-specific components with their own page: Hydraulic adjusting wedge mechanism, Main circuit hose collection, Closed drive circuit hose assembly, CSS adjustment loop hose set, Engine related hose collection, Main/side conveyor lubrication pipe assembly, Flange fastener kit (7 in total).
How do I enquire about parts for the Mobile Jaw crusher?
Send us a drawing or sample and tell us the equipment model and part name.