Chain-driven horizontal vibrating screen · 2025 · 4 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| ElJay FS chain-driven horizontal screen | ElJay FS (Flat screen / chain) | 2025 | 1 |
| ElJay FSG gear-driven horizontal screen | ElJay FSG; FSG 5163-26; FSG 4143-24SP; FSG 4122-24; FSG 5143-24SP; FSG 6203-32; FSG 5142-24HS; FSG 6163-32; FSG 4142-24; FSG 7203-38; FSG 5142-26HS; FSG 412; FSG 414; FSG 514; FSG 516; FSG 616; FSG 620; FSG 720 | 2025 | 5 |
| Cedarapids LJ-TS (successor of ElJay screening technology) | Cedarapids LJ-TS Horizontal screen; Cedarapids LJ-TSH6203-32 | Cedarapids 2011-02 | 26 |
| Cedarapids TSV/LJ-TSV (successor of ElJay elliptical screen technology) | Cedarapids TSV 5162-26; Cedarapids TSV 5163-26; Cedarapids TSV 6162-32; Cedarapids TSV 6163-32; Cedarapids TSV 6202-32; Cedarapids TSV 6203-32; Cedarapids TSV 7202-38; Cedarapids TSV 7203-38; Cedarapids TSV 8202-38; Cedarapids TSV 8203-38 | URL 4-2025, 2024-04 | 41 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | High-strength screen-box sideplates | Sidewalls of the screen box | Cedarapids LJ-TS (2011 brochure) |
| 2 | Polyurethane screen panels | Optional urethane screening deck | Cedarapids LJ-TS (2011 brochure) |
| 3 | Deck frame and cross beams | Deck frame and cross beams | Cedarapids LJ-TS (2011 brochure) |
| 4 | Clamp bars and tension rails | Deck tensioning and clamp bars | Cedarapids LJ-TS (2011 brochure) |
| 5 | Rubber or coil support springs | Support springs below the screen box | Cedarapids LJ-TS (2011 brochure) |
| 6 | Three-shaft impulse assembly | Three-shaft impulse assembly at screen-box centre | Cedarapids LJ-TS (2011 brochure) |
| 7 | Eccentric weights | Eccentric weights on the impulse assembly | Cedarapids LJ-TS (2011 brochure) |
| 8 | Chrome-moly-nickel gear set | Gear set in the impulse assembly | Cedarapids LJ-TS (2011 brochure) |
| 9 | Motor sheave and V-belt | V-belt drive from the motor to the impulse shaft | Cedarapids LJ-TS (2011 brochure) |
| Component |
|---|
| Rubber screen plate |
| Spherical washer |
| Non-contact shaft seal |
| Transmission box O-ring seal |
| Mask respirator |
| Oil flow hole and transmission box baffle |
| Eccentric shaft and bearings |
| 2012LJ-TSH6203-32 feeding box |
| Feed Box Liner — 2012LJ-TSH6203-32 feed box liner |
| 2012LJ-TSH6203-32 discharge lip |
| 2012LJ-TSH6203-32 discharge lip liner |
| 2012LJ-TSH6203-32 motor |
| 2012LJ-TSH6203-32 V-belt speed transmission |
| 2012LJ-TSH6203-32 transmission guard |
| 2012LJ-TSH6203-32 keyless hub locking assembly |
| 2012LJ-TSH6203-32 screen box |
| 2012LJ-TSH6203-32 Huck fastener |
| FSG gear transmission assembly |
| FSG side tensioning screen cloth |
| FSG end tensioning screen cloth |
| FSG segmented screen panel |
| FSG screen cloth hook edge |
| FS chain drive assembly |
| TSV screen box side panel |
| TSV single arch screen structure |
| TSV adjustable spring mount |
| TSV double pivot buffer |
| TSV gear box oil baffle |
| TSV vibrator double O-ring |
| TSV screen cloth clamp strip and removable access cover |
| TSV spherical washer |
Models with the same components are grouped together; select a group to open its component table.
| Component | Location |
|---|---|
| TSV screen box side panel | Standard structure, 5/16in thick; the original page’s durability is not guaranteed by the website. |
| TSV single arch screen structure | Full length support standard structure |
| TSV adjustable spring mount | Five installation slope options, five models are not required |
| TSV double pivot buffer | surge damper standard vibration reduction |
| TSV gear box oil baffle | baffled splash lubrication structure |
| TSV vibrator double O-ring | Standard vibrator seal; no guess elastomer |
| TSV screen cloth clamp strip and removable access cover | Hand operation access structure |
| TSV spherical washer | Clamp tensioning structure |
| TSV Huck screw-on screen box | Fastener material/quantity not specified |
| TSV suspension coil spring | Standard suspension; rubber optional |
| TSV threaded replaceable spring guide | upper/lower spring guide standard structure |
| TSV gland type shaft seal | Standard shaft seal, do not advertise unworn life as unlimited life |
| TSV bottom feeding curtain | Standard structure |
| TSV four-foot clamping strip | Standard length, five feet only option 620/720 |
| TSV V-belt and pulley | Standard driver |
| TSV right transmission cover and motor base/tensioner | Standard right side structure, left side is optional |
| TSV adjustable speed motor pulley | Standard structure |
| TSV spring loaded belt tensioner | standard belt tension idler |
| TSV double row spherical roller bearing | Dimensions are according to 516/616/620/720/820, no cross specifications |
| TSV shaft tube lining | Standard shaft tube liner, no material specified |
| TSV tool-less oil level sight glass | Standard maintenance observation piece, not required for complete tooling kit |
| TSV medium coarse screen with weighted upper layer and side lining extension (optional) | Including feed box/discharge lip, according to optional range |
| TSV bottom deflector (optional) | Patented solution, promotion efficiency improvement is not guaranteed. |
| TSV magnetic screen layer wear-resistant lining (optional) | |
| TSV end tensioning bottom screen layer (optional) | Original factory option |
| Flat layer for screen surface of TSV module (optional) | Original factory option, not standard on the old FSG |
| TSV I-beam foundation frame (option) | Installation support |
| TSV left drive assembly and guard (option) | Second choice configuration with standard right-hand drive, not stacked at the same time |
| TSV five-foot screen cloth clip (optional) | Only designated for 620/720 |
| TSV rubber suspension spring (optional) | Alternative to standard coil option |
| TSV spray pipe and water spray parts (optional) | Nozzle/splash solution, the knock-out reserved hole is not standard for complete spraying |
| TSV wire screen cloth (optional) | |
| TSV screen cloth wedge assembly (optional) | Original factory option |
| TSV bottom tray (optional) | cylinder tray term, structural details not included |
| TSV screen motor (option) | 1200/1500rpm; the host motor base is not a standard configuration of the motor. |
| TSV discharge lip wear-resistant liner | Original watch 1/4in |
| Feed Box Liner — TSV standard feed box liner | Original watch 1/4in |
| Feed Box Liner — TSV medium coarse screen feed box liner (optional) | The original table is 3/8in, which is different from the standard |
| TSV installation raised beam/slope wedge | |
| TSV TOPS2.0 oil purification system (option) | Terex Oil Purification System is clearly matched and the internal filter code is not transcribed |
| TSV HSV high speed variable slope option | 1000rpm range and shorter stroke are original options, not the basic speed |
| No. | Component | Location | Part / drawing no. |
|---|---|---|---|
| 1 | High-strength steel screen box side panels | 2011 LJ-TS screen box sides; successor version only | 3172-300-60 / 3172-300-61 |
| 2 | Polyurethane Panel / PU Screen | 2011 LJ-TS optional screen surface | |
| 3 | Deck Frame — Screen frame and beams | 2011 LJ-TS screen layer support; including herringbone reinforcement | 3172-300-70 / 3172-300-71 |
| 4 | Tension Rail / Wedge — Pressure strips and clamping strips | 2011 LJ-TS screen surface fixing and tensioning | 03144-320-11 |
| 5 | Support Spring / Buffer — Rubber or spiral support spring | 2011 LJ-TS support | 09450-783-07 |
| 6 | Three-axis excitation assembly | 2011 LJ-TS screen box center | |
| 7 | Eccentric weight plate and inserted weight block | 2011 LJ-TS vibration shaft/impact wheel | 03-132-171-0000 / 03-132-271-0000 / 03-132-188-0000 / 03-132-187-0000 |
| 8 | Chromium Molybdenum Nickel Gear Set | 2011 LJ-TS vibration transmission box | 03108-300-05 / 03108-001-28-01 |
| 9 | Adjustable motor pulley and transmission belt | 2011 LJ-TS excitation driver | 07532-005 / 03-128-167-6001 |
| Rubber screen plate | 2011 LJ-TS optional flat screen surface; successor version only | ||
| Spherical washer | 2011 LJ-TS clamping part | 45890-255-44 | |
| Non-contact shaft seal | 2011 LJ-TS hooded transmission case cover | 45203-014 | |
| Transmission box O-ring seal | 2011 LJ-TS HuckBolt connection gearbox | ||
| Mask respirator | 2011 LJ-TS transmission box | ||
| Oil flow hole and transmission box baffle | 2011 LJ-TS wheel hub and transmission case interior | ||
| Eccentric shaft and bearings | 2011 LJ-TS excitation mechanism | 07032-019 / 03-132-143-6020 / 03-132-144-6020 | |
| 2012LJ-TSH6203-32 feeding box | 24in (610mm) feed box | ||
| Feed Box Liner — 2012LJ-TSH6203-32 feed box liner | Inside the feed box | ||
| 2012LJ-TSH6203-32 discharge lip | Discharge lips | ||
| 2012LJ-TSH6203-32 discharge lip liner | Discharge lip | ||
| 2012LJ-TSH6203-32 motor | 40hp (30kW), original page rated voltage 460V60Hz three-phase; 1200rpm TEFC | ||
| 2012LJ-TSH6203-32 V-belt speed transmission | V-belt adjustable-speed drive | ||
| 2012LJ-TSH6203-32 transmission guard | Screen V-belt transmission guard | ||
| 2012LJ-TSH6203-32 keyless hub locking assembly | Keyless hub locking assembly | ||
| 2012LJ-TSH6203-32 screen box | Huck-bolted screen box | ||
| 2012LJ-TSH6203-32 Huck fastener | Screen box fastening; do not write product number/specific quantity |
| Component | Location |
|---|---|
| FSG gear transmission assembly | FSG name clearly explained gear, gear internal list is not included |
| FSG side tensioning screen cloth | Basic specifications listed, standard 5ft panel; 4ft is optional, according to serial number |
| FSG end tensioning screen cloth | The listed basic specifications, the hook edge geometry is not suitable for the complete machine appearance |
| FSG segmented screen panel | Column 514/516/616/620/720 |
| FSG screen cloth hook edge | 45/45R/square hook optional geometry; not all screen cloths have the same hook |
| Component | Location |
|---|---|
| FS chain drive assembly | Original name Flat screen/chain only certifies this transmission category; chain number/sprocket/lubrication is not included |
The Chain-driven horizontal Vibrating screen covers 4 models: ElJay FS chain-driven horizontal screen, ElJay FSG gear-driven horizontal screen, Cedarapids LJ-TS, Cedarapids TSV/LJ-TSV. Former and renamed designations are listed in the models table on this page.
The Chain-driven horizontal Vibrating screen is also documented under these designations: ElJay FS chain-driven horizontal screen, ElJay FS, ElJay FSG gear-driven horizontal screen, ElJay FSG, FSG 5163-26, FSG 4143-24SP, FSG 4122-24, FSG 5143-24SP, FSG 6203-32, FSG 5142-24HS, FSG 6163-32, FSG 4142-24, FSG 7203-38, FSG 5142-26HS.
The Chain-driven horizontal Vibrating screen is listed under the ElJay brand as: Chain-driven horizontal vibrating screen. Period: 2025. Status: Historical model.
73 components are recorded, including: FS chain drive assembly, FSG gear transmission assembly, FSG side tensioning screen cloth, FSG end tensioning screen cloth, FSG segmented screen panel, FSG screen cloth hook edge, High-strength steel screen box side panels, Polyurethane Panel / PU Screen and more. The full list with locations is in the components table on this page.
High-strength steel screen box side panels: 3172-300-60 / 3172-300-61, Deck Frame: 3172-300-70 / 3172-300-71, Tension Rail / Wedge: 03144-320-11, Spherical washer: 45890-255-44, Support Spring / Buffer: 09450-783-07, Eccentric weight plate and inserted weight block: 03-132-171-0000 / 03-132-271-0000 / 03-132-188-0000 / 03-132-187-0000, Chromium Molybdenum Nickel Gear Set: 03108-300-05 / 03108-001-28-01, Non-contact shaft seal: 45203-014, Eccentric shaft and bearings: 07032-019 / 03-132-143-6020 / 03-132-144-6020, Adjustable motor pulley and transmission belt: 07532-005 / 03-128-167-6001.
Model-specific components with their own page: TSV TOPS2.0 oil purification system (option), TSV HSV high speed variable slope option (2 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry