What other names or designations is the Tabor known by?
The Tabor is also documented under these designations: Tabor Reverse Incline.
2018 · 1 model


Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Period | Components |
|---|---|---|
| Tabor Reverse Incline | 2018 | 5 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location |
|---|---|---|
| 1 | Feed Box Liner | Rubber or ceramic lining of the feed water box |
| 2 | Tabor Thane linear drive | Linear-motion drive above the screen body |
| 3 | Huck bolts | Main screen-body joints |
| 5 | UHMW-lined effluent pan | Effluent pan below the screen body |
| 6 | Support Spring / Buffer | Between the screen body and support base |
| 7 | Corrosion-resistant paint | External screen-body surfaces |
| 8 | Cross beam | Cross tube members of the deck support frame |
| 9 | A-frame motor support | A-frame support adjacent to the top drive |
| 10 | Reinforced side plates | Screen body sidewalls |
| Component |
|---|
| Wear-resistant side linings |
| Screen media |
Models with the same components are grouped together; select a group to open its component table.
| No. | Component | Location |
|---|---|---|
| 1 | Feed Box Liner | |
| 2 | Exciter | Exciter drive section of the screen box |
| 6 | Support Spring / Buffer | |
| 8 | Cross beam | Screen deck support position inside the screen box |
| Screen Mesh / Wire Mesh |
The Tabor is also documented under these designations: Tabor Reverse Incline.
The Tabor is listed under the Elgin brand. Period: 2018. Status: Historical model.
5 components are recorded, including: Screen Mesh / Wire Mesh, Support Spring / Buffer, Feed Box Liner, Cross beam, Exciter. The full list with locations is in the components table on this page.
Model-specific components with their own page: Cross beam, Exciter (2 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the equipment brand, complete model and serial number, part name, part number or drawing number, drawing revision, quantity, material requirements and duty. If identifiers are unavailable, send photographs and key dimensions.
Submit an Enquiry