Which brand and type of equipment is the Tabor Reverse Incline?
The Tabor Reverse Incline is listed under the Elgin brand. Period: 2018. Status: Historical model.
2018 · 1 model


Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Period | Components |
|---|---|---|
| Tabor Reverse Incline | 2018 | 5 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location |
|---|---|---|
| 1 | Feed Box Liner | Rubber or ceramic lining of the feed water box |
| 2 | Tabor Thane linear drive | Linear-motion drive above the screen body |
| 3 | Huck bolts | Main screen-body joints |
| 5 | UHMW-lined effluent pan | Effluent pan below the screen body |
| 6 | Support Spring / Buffer | Between the screen body and support base |
| 7 | Corrosion-resistant paint | External screen-body surfaces |
| 8 | Cross beam | Cross tube members of the deck support frame |
| 9 | A-frame motor support | A-frame support adjacent to the top drive |
| 10 | Reinforced side plates | Screen body sidewalls |
| Component |
|---|
| Wear-resistant side linings |
| Screen media |
Models with the same components are grouped together; select a group to open its component table.
| No. | Component | Location |
|---|---|---|
| 1 | Feed Box Liner | |
| 2 | Exciter | Exciter drive section of the screen box |
| 6 | Support Spring / Buffer | |
| 8 | Cross beam | Screen deck support position inside the screen box |
| Screen Mesh / Wire Mesh |
The Tabor Reverse Incline is listed under the Elgin brand. Period: 2018. Status: Historical model.
5 components are recorded, including: Screen Mesh / Wire Mesh, Support Spring / Buffer, Feed Box Liner, Cross beam, Exciter. The full list with locations is in the components table on this page.
Model-specific components with their own page: Cross beam, Exciter (2 in total).
Envoyez-nous un plan ou un échantillon et indiquez le modèle d'équipement et le nom de la pièce.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Ou contactez-nous directement : +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to drawing, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
Veuillez fournir la marque de l’équipement, le modèle complet et le numéro de série, le nom de la pièce, sa référence ou le numéro du plan, l’indice de révision du plan, la quantité, les exigences relatives au matériau et les conditions de service. Si ces identifiants ne sont pas disponibles, envoyez des photographies et les dimensions principales.
Submit an Enquiry